Heaters for a Pergola: Safety, Installation and the Right Output
6 minutes read
Under a pergola, electric infrared heaters are the safe choice: they work without an open flame and without exhaust gases, can be fixed to profiles or a wall and warm people directly. What matters for safety is the right protection rating, the mounting heights and clearances specified by the manufacturer, and a professional electrical connection. Gas patio heaters do not belong under an enclosed louvred roof.
Heaters for a pergola: infrared instead of gas patio heaters
A gas patio heater with a gas bottle warms the air above an open flame and gives off combustion gases. Under closed louvres or with side walls, this exhaust can collect, and the hot top of the unit sits close under the roof. Electric infrared heaters work differently: according to HEATSCOPE, they first warm the surfaces of bodies, not the surrounding air. That suits a semi-open space, where warm air escapes quickly anyway.
| Criterion | Electric infrared heater | Gas patio heater |
|---|---|---|
| Installation | Fixed to wall, post or roof profile | Freestanding |
| Exhaust gases | None at the point of use | Combustion gases |
| Suitability under an enclosed cover | Yes, with a suitable protection rating and clearances | Not suitable |
| Operation | Switch, dimmer, radio, smart home | Manual |
| Running | Electrical supply needed | Change the gas bottle |
Running costs also often favour electricity: in its FAQ, HEATSCOPE calculates, at €0.33/kWh, €0.53/h for a 1,600 W unit and €1.06/h for a 3,200 W unit. Your actual costs depend on the electricity price and how long you use it.
The right output for your pergola
How much heating output makes sense depends on how sheltered the seating area is from the wind. The HEATSCOPE planning guide gives the following guideline values:
- Enclosed areas without wind: approx. 200 W/m²
- Sheltered outdoor areas with two to three closed sides: approx. 300 W/m²
- Open outdoor areas, windy, two to three sides open: approx. 400 W/m²
Calculate with the area actually used, such as the seating group, not with the whole pergola.
Example: A seating group of 3.0 × 3.0 m under a louvred roof, with two sides closed by zip screens. Using the guideline for sheltered areas, 9 m² × 300 W/m² gives about 2,700 W. That can be covered with two units of around 1,400 to 1,600 W each, radiating from two sides. If you open the screens, you will feel correspondingly less warmth in wind.
Side elements are therefore the most effective lever for comfort. How zip screens keep out wind and prying eyes is explained in Zip screens on the pergola.
Installation: height, position and fixing
Mounting height
Every manufacturer specifies mounting heights for its units. HEATSCOPE, for example, recommends 2.10 to 2.30 m for wall mounting and up to 2.50 m for outdoor ceiling mounting, with ranges between 1.80 and 3.00 m depending on the model. Mounted too low, it gets uncomfortably hot around the head; mounted too high, hardly any warmth arrives.
Clearances to roof, wall and glass
The minimum clearances to ceilings, walls and glass surfaces are given in the installation instructions for the unit concerned. Observe these clearances, including to louvres, gutters, screen cassettes and awning fabrics. Heat radiation in a confined space can damage coatings, seals and fabrics.
Fixing to the pergola
Check with the pergola manufacturer which profiles may carry additional loads and which fixings are suitable. Drilling into load-bearing profiles or gutters should only be done with approval. Many suppliers have adapters or prepared mounting rails for this.
Mind the protection rating
The protection rating (IP code) says how well a device is protected against foreign bodies (first digit) and water (second digit). HEATSCOPE, for example, notes that its IP24 and IP44 models may only be mounted in covered areas, while the IP65 model can also be used unprotected outdoors. Under a louvred roof with open louvres, rain can get in, so choose the protection rating for the worst case.
Where the heaters belong: positioning
Position often decides comfort more than output. Some basic rules from practice:
- From the side rather than from above: A heater aimed obliquely at the seating group warms torso and legs. Units radiating straight down mainly warm head and shoulders.
- Two smaller units rather than one large one: Warmth from two directions feels more even, and nobody sits in the shadow of their neighbour.
- Not in the line of sight: Even heaters with little visible light should not point directly into the field of view from the sofa.
- Allow for wind: Mount the units on the side away from the wind, or protect the weather side with a screen.
- Louvre position: Closed louvres keep heat under the roof slightly better. Still observe the clearances to the roof from the installation instructions.
Sketch the seating group, heaters and direction of radiation on a plan of the pergola before having cables laid.
Electrical connection and control
- Install professionally: Permanently mounted heaters with their own supply cable belong in the hands of a qualified electrician.
- Own circuit: Manufacturers such as HEATSCOPE require a separately fused 16 A supply line per unit. Plan the cables before the foundation and the terrace flooring.
- Control: Radio switches, dimmers or a smart-home hub switch heaters together with lighting and louvres. Somfy, for example, lists lighting and heating as part of terrace automation via TaHoma. More in Controlling a pergola with smart home.
- Switch-off: A timer or presence sensor prevents heaters running unused for hours.
Safety in everyday use
- Do not store textiles, cushions or decorations directly in front of or above the heater.
- Do not run screens down close to heaters that are on.
- Switch units off in storms and snow; move louvres to the position recommended by the manufacturer.
- Clean reflectors and housings regularly; dust and pollen reduce output.
- Warn children and pets about hot surfaces.
Near a pool, additional requirements apply to electrical systems; notes in Pergola by the pool.
Checklist before buying
- Measure the seating area and assess the wind protection.
- Calculate output using the guideline and spread it over several units.
- Compare mounting height and clearances from the manufacturer's instructions with the pergola dimensions.
- Choose the protection rating for open louvres.
- Plan supply cables with the electrician.
- Clarify fixing points with the pergola manufacturer.
- Decide on control: switched individually, dimmed or integrated in scenes with lighting and louvres.
- Involve neighbours and housemates if heaters would point towards the neighbouring property.
Plan a pergola with warmth and light
In the configurator you set the dimensions, side elements and lighting of your louvred roof, which is the basis for heating planning. What equipment the bioclimatic pergola offers and how to run it in winter is also covered in Pergola in winter.
Frequently asked questions
Which heater suits a pergola?
Electric infrared heaters are usual for covered louvred roofs. They are fixed in place, produce no exhaust gases and warm people directly. Gas patio heaters with an open flame do not belong under an enclosed cover.
At what height do you mount a heater under the louvred roof?
Manufacturers specify mounting heights per model. HEATSCOPE, for example, gives up to 2.50 m as optimal for outdoor ceiling mounting and, depending on the model, ranges between 1.80 m and 3.00 m. The installation instructions for your unit are what count.
How much heating output do I need for my terrace?
As a rough guideline, HEATSCOPE gives about 300 W/m² for sheltered and about 400 W/m² for open, windy outdoor areas. Calculate with the seating area actually used, not the whole pergola.
May I connect the heater myself?
Permanently installed heaters with their own supply cable should be connected by a qualified electrician. Manufacturers often require a separately fused circuit for each unit.
Sources
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.