Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Pergolas & planning rules

Pergola Configurator: How to Plan Your Pergola Online – and What 3D and AR Add

6 minutes read

With a pergola configurator you plan your louvred roof online: you enter width, depth and post height, choose mounting type, colour, drive and equipment, and see straight away how each decision affects the result. In the AluKun configurator this works to the millimetre – for widths from 2 to 7 m, depths from 2 to 10 m and post heights from 2 to 3.5 m. 3D and AR views can also help you judge the proportions on site. The most important groundwork remains an accurate measurement, though.

What to have ready before you start

Before you configure, collect this information:

  • Dimensions of the terrace and the area you want covered,
  • available height at the house wall between window lintel and roof overhang,
  • distance to the neighbouring boundaries,
  • orientation of the terrace,
  • snow load and wind zone of your location,
  • base: lawn, paving, concrete slab or roof terrace.

How to clarify these points in the right order is explained in the article Pergola planning step by step.

Pergola configurator: the steps at a glance

Step What you decide What to watch
1. Dimensions Width, depth, post height Permission limits and distances in your state
2. Mounting type freestanding or wall mounting Wall build-up, height at the façade
3. Colour Shade of the structure Matching windows and façade
4. Drive Type of louvre operation Motor as the basis for sensors and smart home
5. Lighting LED option Plan the power supply
6. Side elements Screen or glass wall per side only one per side, wall side stays free
7. Posts additional posts structurally necessary posts are added by the system automatically
8. Quantity Number of identical pergolas e.g. for terraced estates

Dimensions and posts

The dimensions determine almost everything: area, permission question, structural design and price. If the chosen width exceeds the clear span the profile system is designed for, the configurator automatically adds a centre post. This rule is checked on the server and not taken from the browser – so the configuration stays structurally plausible. You can also voluntarily choose further posts. The background is explained in the article Structural design of an aluminium pergola.

Mounting type

With a switch you change between freestanding pergola and wall mounting. With wall mounting, the back is the wall side; neither screens nor glass walls are possible there.

Side elements

For each of the four sides – front, back, left, right – you choose a zip screen, a glass wall or no element. Both on the same side is not possible. Read more about the options in the article on zip screens on the pergola. As a rule of thumb: screens for sun and privacy protection on the south and west sides, glass walls for wind protection on the weather side, the garden side often open.

3D view: understanding proportions better

A three-dimensional view shows what a table of dimensions cannot: how high 2.80 m looks, how close together the louvres are or how a screen closes the side. Use a 3D view deliberately:

  • View from several sides: also from your neighbour's perspective.
  • Compare louvre positions: open, tilted, closed.
  • Check colours: screen colours do deviate from the real shade, though. For the final decision, a sample in daylight is better.

AR: placing the pergola in your own garden

Augmented reality overlays a 3D model on the camera image of your smartphone or tablet. That way you see the pergola at full size on your terrace. Technically there are mainly two routes in the browser:

  • iPhone and iPad: Apple's AR Quick Look displays 3D models in USDZ format straight from Safari. The prerequisite is iOS or iPadOS 12 or newer.
  • Android: Google's Scene Viewer displays models in glTF format. You need an ARCore-capable device with Android 7.0 or newer and current Google Play Services for AR.

Whether a configurator offers an AR view, and for which devices, depends on the provider. Where it is available:

  1. Use in daylight: the camera detects surfaces more reliably in good light.
  2. Let it capture the floor: move the device slowly across the terrace until the surface is detected.
  3. Check the position: is the distance to house wall, door and boundary right?
  4. Do not use it as a measuring tool: AR shows proportions but does not replace measuring with a tape or laser.

Saving and sharing the configuration

A finished configuration is more than an order. It is the common basis for everyone involved in your project:

  • Structural engineer: needs dimensions, post positions, mounting type and side elements for the structural design.
  • Building authority: can judge from area, depth and height whether the pergola is exempt from procedure.
  • Neighbours: understand better what is being built with a concrete plan.
  • Owners' association: needs a clear description of the structural alteration for the resolution.
  • Electrician and building contractor: plan supply cable, foundations and drainage to the same dimensions.

So keep the configuration carefully together with the quote, structural documents and permission evidence.

Typical mistakes when configuring online

  • Confusing inner with outer dimensions: the figures in the configurator refer to the pergola, not to the clear area underneath. Posts and gutters take up space.
  • Ignoring slope: if the terrace slopes, you must choose the post height at the lowest point deliberately.
  • Checking permission too late: if you compare dimensions with the state building code only after ordering, you risk rework. An overview is given in the article Pergola and planning permission.
  • Forgetting side elements: if you want to retrofit screens later, mention that when planning.
  • Not stating the location: snow and wind load belong to the planning, even if the configurator does not ask for them. Give place and exposure when you request a quote.

For permissibility, the development plan and the local building authority always have the final say; this article does not replace legal advice. The permission rules referred to are German – readers elsewhere should check local rules.

From configurator to quote

The price of your configuration is calculated on the server from the chosen options – not in the browser. With the finished configuration you have two options:

  • Request a quote: sensible if you want to clarify questions on structural design, installation or delivery.
  • Order directly: when dimensions, permission and equipment are settled.

Trade businesses, developers and architects planning pergolas for clients can use tiered discounts with a B2B account.

Checklist before submitting

  1. Dimensions re-measured and compared with permission limits.
  2. Distance to the boundary checked.
  3. Mounting type chosen to suit the façade.
  4. Side elements decided per side.
  5. Colour matched with windows and façade.
  6. Location noted with snow and wind zone.
  7. Foundations, power and drainage planned.
  8. Owners' association resolution or landlord's consent obtained, if needed.

Get started now

Open the pergola configurator, enter your dimensions and put your louvred roof together step by step. With the finished configuration you request your quote or order directly.

Frequently asked questions

Which dimensions can I choose in the AluKun pergola configurator?

Width from 2 to 7 m, depth from 2 to 10 m and post height from 2 to 3.5 m, each to the millimetre. If the width exceeds the span limit of the system, the configurator automatically adds a post.

Can I choose a zip screen and a glass wall on the same side?

No, each side can have either a screen or a glass wall. With wall mounting, the wall side stays without a side element.

What do I need for an AR view on my smartphone?

AR views in the browser usually use Apple's AR Quick Look with USDZ models on iPhone and iPad, and Google's Scene Viewer with glTF models and an ARCore-capable device on Android. Whether an AR view is offered depends on the configurator in question.

Is the price in the configurator binding?

The price is calculated on the server from your configuration. With the finished configuration you can request a quote or order; details such as delivery and installation are clarified in the quote.

Sources

  1. Apple Developer: AR Quick Look(opens in a new tab)
  2. Google for Developers: Scene Viewer(opens in a new tab)
  3. DIBt: Technische Baubestimmungen, Schnee- und Windzonen(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Planning a Pergola: Size, Orientation, Equipment
Pergolas & planning rules

Planning a Pergola: Size, Orientation, Equipment

Plan a pergola in 8 steps: use, dimensions, orientation, mounting type, permission, structure, equipment and base – with a size table and a checklist.

7 minutes read

Cover image: Pergola in Winter: Louvre Position, Snow, Frost
Pergolas & planning rules

Pergola in Winter: Louvre Position, Snow, Frost

Pergola in winter: which louvre position for snow, what to do in frost and ice, when to clear snow and how to prepare screens and automation for the cold.

6 minutes read

Cover image: Cleaning a Pergola: Aluminium Care and Upkeep
Pergolas & planning rules

Cleaning a Pergola: Aluminium Care and Upkeep

Clean and maintain an aluminium pergola: how often, with what and in which order – louvres, gutters, post outlets, screens, glass, motor and winter care.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy