Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Timber-Aluminium Windows: Construction, Advantages and When the Combination Pays Off

6 minutes read

Timber-aluminium windows combine a load-bearing timber frame inside with a weatherproof aluminium shell outside. They pay off when you want the warmth and look of wood in the living space but no longer want to maintain exterior paintwork. The price is usually above that of uPVC and all-timber windows; what decides quality is a properly ventilated aluminium shell.

Construction of a timber-aluminium window

At its core, a timber-aluminium window is a timber window. The frame usually consists of multi-layer laminated timber – spruce, pine, larch or oak, for example – which is more dimensionally stable than solid wood. An aluminium shell is fitted on the outside, keeping rain, sun and frost away from the wood.

Some manufacturers go further and build multi-layer frames. Internorm, for instance, describes its timber-aluminium windows as a construction with a core of multi-layer laminated timber inside, a thermally insulating foam layer in the middle and an aluminium shell outside. Such systems reach particularly low U-values; for the HF 510 model, Internorm quotes a Uw-value of 0.64 W/(m²K) or better.

An important distinction from the aluminium-timber window in the narrower sense: there an aluminium profile is load-bearing, and inside there is merely a timber lining fitted on. In the trade, though, the terms are often mixed up – ask which material is load-bearing.

Ventilation gap: the most important quality feature

Aluminium cools down strongly in winter. Condensation can therefore form on the inside of the shell. If the shell lies directly against the wood, this water does not dry off – the wood stays permanently damp and can be damaged.

Properly built timber-aluminium windows solve this as follows:

  • Fixing at points: the shell is not fixed over its whole area but via special plastic clips. This connection is also thermally broken.
  • Spacing: an air gap remains between aluminium and wood. The trade platform baustoffwissen recommends at least 3 mm, "better more".
  • Air circulation: air can circulate through the gap, so that moisture dries off quickly.

Be careful with retrofitted add-on cladding or DIY solutions: baustoffwissen warns that with such constructions "severe timber damage can be a foregone conclusion within a short time". Choose a tested system window.

Advantages

  • Homely interior: wood gives a warm feel and look that many clients appreciate.
  • Low-maintenance exterior: the aluminium shell needs no painting; powder coating is possible in many colours.
  • Good insulation values: wood insulates well; with triple glazing, funding values are reachable.
  • Two-tone finish: anthracite grey outside, natural or stained wood inside – the combination is freely selectable.
  • Architectural effect: slim aluminium shells suit modern and classic façades.

Disadvantages

  • Price: timber-aluminium windows are among the more expensive window types. The additional shell and the more elaborate fabrication add up.
  • Care inside: the wood inside needs little, but some care – refreshing the finish when it is worn, for instance.
  • Moisture sensitivity in the room: in bathrooms or rooms with high humidity, regular ventilation is especially important.
  • Quality differences: the ventilation gap and the fixing of the shell are decisive; there are differences between suppliers.

Timber-aluminium compared with other materials

Criterion uPVC Aluminium Timber Timber-aluminium
Interior look uPVC/foil Aluminium Wood Wood
Exterior care low low regular repainting low
Interior care low low low low
Insulation good system-dependent good good to very good
Price lower higher medium usually highest

The table shows tendencies; specific values depend on the system. The weighing of uPVC against aluminium is described in the article uPVC or aluminium, and the maintenance effort of all-timber windows in the article Timber windows: maintenance.

Energy requirements

When replacing windows in residential buildings in Germany, the GEG requires a Uw-value of at most 1.3 W/(m²K), and for BAFA individual-measure funding Uw ≤ 0.95 W/(m²K) applies at a basic funding rate of 15%; according to BAFA, the 5% iSFP bonus applies only from €30,000 of eligible minimum investment for one residential unit (as of September 2026). Timber-aluminium windows with triple glazing generally reach these values; very high-performance systems lie well below. The Uw-value is calculated under DIN EN ISO 10077-1 from frame, glass and glass edge – have it stated for your dimensions. These are German rules; in the UK or elsewhere, check the thermal limits and funding schemes that apply to you.

Timber species and interior finishes

The interior determines the character of the window. Spruce and pine are common as lower-priced softwoods, larch with a pronounced grain, and oak as a hard, darker hardwood. Internorm, for example, offers spruce, larch, oak and walnut in various colour variants. The surface is usually stained, painted opaque or oiled:

  • Stain: the grain remains visible, and the shade can be matched.
  • Opaque paint: white, for example, if wood is chosen only for its feel.
  • Oil: a particularly natural look, needing somewhat more frequent care.

Inside, the wood is not exposed to the weather; care usually means only cleaning and occasionally refreshing heavily used spots, such as at the window sill.

Installation and connection

The same rules apply to installation as for all windows: airtight inside, driving-rain-tight and vapour-permeable outside. With timber-aluminium windows it is particularly important that the ventilation of the shell is not closed off by plaster, sealant or connection tapes. The external window sill is connected to the system without blocking the ventilation openings of the shell. Ask for the manufacturer's installation instructions and agree them with the plasterer.

Cost factors

The price of a timber-aluminium window is determined by timber species, interior finish, colour of the aluminium shell, glazing, hardware and size. Oak and walnut are more expensive than spruce, coloured powder coatings more expensive than standard colours. Because timber-aluminium windows are mostly made to order, lead times are also often longer than for uPVC windows from standard profiles.

When timber-aluminium pays off

  • New build or full refurbishment with high demands on living quality, where wood inside is wanted
  • Listed or period-building settings where wood inside suits the interior but exterior maintenance is to be saved (clarify listed-building requirements beforehand)
  • Exposed façades with heavy weathering, where all-timber windows would often need repainting
  • Long-term owner-occupiers who want to recoup the extra cost over decades without exterior painting

Timber-aluminium is less sensible on a tight budget, in ancillary rooms, or if an easy-care, smooth surface is wanted inside anyway.

Checklist when buying

  1. Clarify the load-bearing material: timber-aluminium or aluminium-timber?
  2. Ask about ventilation: how is the shell fixed, and how large is the air gap?
  3. Decide the timber species and finish inside – stain, paint or oil.
  4. Have Uw stated per window, especially if you want funding.
  5. Choose the colour of the aluminium shell; powder coating in RAL colours is usual.
  6. Request the manufacturer's care instructions for the interior.

Unsure whether timber-aluminium, uPVC or aluminium suits your project better? Contact us through the contact form or compare the systems on the windows page.

Frequently asked questions

How is a timber-aluminium window built?

Inside, a timber frame carries the construction; outside, an aluminium shell protects against the weather. The shell is usually fixed at points with plastic clips and mounted at a distance from the timber, so that the gap is ventilated.

Why must the aluminium shell be ventilated?

Condensation can form on the cold aluminium shell. Without air circulation between aluminium and timber it does not dry off and can damage the wood. Trade sources recommend a gap of at least 3 mm.

Do timber-aluminium windows need painting?

Not outside, because the aluminium shell protects the wood from rain and UV. Inside, occasional cleaning and refreshing of the finish is generally enough, as the wood is not exposed to the weather there.

Are timber-aluminium windows eligible for funding?

Yes, if they reach the required Uw-value. For German BEG individual-measure funding, Uw ≤ 0.95 W/(m²K) applies. Many timber-aluminium systems reach that with triple glazing; the proof per window is what counts.

Sources

  1. baustoffwissen – Alu-Holz-Fenster: Hinterlüftung ist ein Muss(opens in a new tab)
  2. Internorm – Holz-Alu-Fenster(opens in a new tab)
  3. GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
  4. BAFA – BEG Einzelmaßnahmen Gebäudehülle(opens in a new tab)
  5. Baunetz Wissen – U-Wert und Wärmedurchgangskoeffizient(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: uPVC or Aluminium Windows: Which Is Worth It?
Window profiles

uPVC or Aluminium Windows: Which Is Worth It?

uPVC or aluminium windows? Honest comparison of insulation, stability, sightlines, colours, care and cost – with a recommendation for each project.

7 minutes read

Cover image: Elvial W59: Aluminium Windows from Greece
Window profiles

Elvial W59: Aluminium Windows from Greece

Elvial W59 SI² overview: 59 mm frame depth, Uf from 1.8 W/(m²K), sashes up to 130 kg. What the system offers and why it is rarely first choice in Germany.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy