Aluminium Louvres for the Pergola: Profiles, Rotation Angle and Watertightness Explained
7 minutes read
The aluminium louvres are the heart of a bioclimatic pergola: they rotate to regulate sun and air, and close to channel rain through integrated gutters to the posts. How well this works depends on profile shape, rotation angle, seals and water drainage, and these values are on the datasheet. If you understand the louvres, you can compare quotes objectively.
Construction of an aluminium louvre
A louvre is an extruded hollow aluminium profile seated at both ends in bearings in the frame. A linkage or push rod connects all the louvres in a section to the motor so that they rotate in sync. Typical components:
- Multi-chamber profile: The chambers give the louvre stiffness at low weight. The greater the span, the taller and stiffer the profile must be.
- Water-guiding edges: Many profiles have a small channel or overlap on the long edge. When closed, the louvres interlock and the water runs sideways in this channel.
- Seals: Elastomer seals between the louvres and at the ends reduce water ingress and rattling noises.
- End caps and bearings: They guide the axis of rotation and must remain permanently free-running.
- Coating: Powder coating protects against weather; for the choice of quality at coastal locations, see Pergola in a coastal climate.
Rotation angle: what the degree figure means
The rotation angle describes how far a louvre can open from the closed position. What matters in practice:
| Position | Effect | Typical use |
|---|---|---|
| Closed | Rain protection, shade, water runs off through gutters | Showers, midday sun |
| Slightly open | Air circulation, filtered light | Hot days, avoiding heat build-up |
| Roughly vertical | Maximum light from above | Spring, overcast days |
| Beyond vertical | Louvres can be "turned" towards the sun | Blocking low-angle light, controlling sightlines |
A wide rotation range lets you adapt the louvres to the position of the sun through the day. Renson gives a rotation range of up to 150° for its louvred roofs; other manufacturers such as weinor describe their louvres as continuously adjustable. Compare on the datasheet whether the angle is usable in both directions and whether individual sections can be controlled separately.
The louvre direction is also relevant: do the louvres run parallel or at right angles to the house wall? That affects how well morning or evening sun can be screened, and where the gutters lie.
Watertightness and water drainage
A louvred roof is not a closed glass roof. It consists of many moving parts, and every joint is a possible point of entry. Good systems solve this through water guidance rather than absolute tightness:
- Rain hits the closed louvres.
- The overlaps channel it into the longitudinal gutters of the louvres.
- The louvres drain into a surrounding or side frame gutter.
- The frame gutter leads the water into the posts and from there downwards.
Manufacturers sometimes state performance as drainage capacity; Renson, for example, gives a drainage capacity of 150 l/m²·h. In heavy rain with wind, spray can still get in at the ends or the wall connection. What matters is that gutters and post outlets stay clear. More in Drainage in the louvred roof.
After rain: Open the louvres only once the water has run off, and only slowly. Otherwise residual water drips from the louvre edges onto the seating area. Many controls have a drip-off position for this.
Loads: snow and wind on the datasheet
The louvres carry snow and must withstand wind suction and pressure. Typical datasheet statements:
- Snow load in kg/m² or kN/m², usually for closed louvres. Renson gives more than 100 kg/m² for its louvred roofs.
- Wind resistance in km/h or as a wind class. Renson gives up to 160 km/h for its louvred roofs.
- Maximum louvre span: the longer the louvre, the greater its deflection.
The values apply only to the configuration described on the datasheet, meaning particular dimensions, post spacings and fixings. If you order the structure wider or deeper, ask for the figures for exactly that size. Compare the snow load with the value for your location (Snow load on pergolas) and heed the manufacturer's winter notes, for example whether the louvres must stay closed in snow.
Rotating, sliding, coupled: design variants
Not every louvred roof works the same way. Besides the classic variant with rotating louvres, there are:
- Rotating and sliding louvres: In some systems, the louvres can not only be rotated but also slid together into a stack so that the sky above the seating area is free. Renson offers this, for example, with Camargue Skye and Aero Skye. The mechanism is more complex; the benefit is a fully open roof.
- Several louvre sections: Large structures are divided into sections that can be controlled separately, for example closed over the dining table and open over the plants.
- Coupled modules: If two pergolas are placed side by side, an internal gutter forms between them. Its drainage must be properly resolved.
- Integrated lighting: LED strips usually sit in the frame, in some systems also in the louvres. This affects cable routing and maintenance.
Which variant makes sense depends on how you use the terrace: if you mainly want shade and rain protection, rotating louvres serve well. If you want to see as much sky as possible in spring and autumn, look at sliding systems.
Drive, sensors and operation
The louvres are moved by an electric motor, usually via radio remote control, wall switch or app. They work automatically with sensors:
- Rain sensor: closes the louvres at the first drops.
- Wind sensor: brings louvres and screens into a safe position.
- Sun and temperature sensor: opens or closes depending on solar radiation.
Somfy, for example, offers wind, sun and temperature sensors with the io radio protocol. How to integrate the louvres into a smart-home control is described in Controlling a pergola with smart home.
Noise, expansion and maintenance
Aluminium expands when warmed. A quiet creak when heating up in the morning sun can therefore be normal. Persistent rattling in the wind or stiff louvres, by contrast, point to worn seals, dirty bearings or a misadjusted drive.
Once a year you should:
- run the louvres through all positions and listen for noises,
- check seals for cracks and embrittlement,
- clear gutters and overlaps of leaves and pollen,
- clean the louvres only with a soft cloth and mild cleaner.
Checklist: comparing louvres in a quote
- Profile shape and maximum louvre length.
- Rotation range and opening direction.
- Water drainage: gutters in the louvres, frame gutter, discharge through posts.
- Snow load and wind resistance according to the datasheet.
- Seal material and replaceability.
- Drive, emergency operation and sensor options.
- Coating quality and warranty terms.
Louvred roof made to measure
In the configurator you choose dimensions, louvre direction, colour and sensors for your louvred roof. You will find all the technical features of the bioclimatic pergola on the product page.
Frequently asked questions
How far can the louvres of a pergola be rotated?
That depends on the system. Many louvred roofs can be adjusted continuously between closed and wide open; Renson, for example, gives a rotation range of up to 150° for its louvred roofs. The manufacturer's datasheet is what counts.
Is a louvred roof really waterproof?
Closed louvres channel rain through gutters in the louvres and frame to the posts. Manufacturers usually describe this as rainproof or water-repellent; a moving system is not absolutely tight like a glass roof, especially not in wind and heavy rain.
What snow load can aluminium louvres withstand?
The permissible snow load is on the datasheet and generally applies to closed louvres. Renson, for example, gives more than 100 kg/m² for its louvred roofs. Always compare the value with the snow load at your location.
Why do louvres sometimes creak or rattle?
Aluminium expands with temperature changes. Slight noises when heating up can be normal; rattling in the wind, by contrast, points to loose bearings, worn seals or incorrectly adjusted drives.
Sources
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.