Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Pergolas & planning rules

Pergola Installation: The Process from Survey to Handover

7 minutes read

Installing a pergola does not begin with the first post but with an accurate survey. Next come clarifying the permit, manufacture, foundations, assembly, electrical connection and handover with a function check. The assembly itself is often the shortest part; preparation and a clean wall connection are what make for a good result.

Pergola installation at a glance

Phase What happens Who is involved
1. Planning and survey Record dimensions, base, wall, falls, obstacles Homeowner, specialist firm
2. Permit and development plan Check exemption, building application if needed Homeowner, building control authority if applicable
3. Ordering and manufacture Final approval of the configuration Homeowner, manufacturer
4. Preparatory work Foundations, conduits, drainage Specialist firm, qualified electrician
5. Assembly Posts, frame, louvres, drive, accessories Installation team
6. Electrics and adjustment Connection, programming, sensors Qualified electrician, installation team
7. Acceptance and handover Function test, briefing, protocol Homeowner, installation team

Step 1: Survey, the basis for everything

The survey measures more than the width and depth of the terrace. Also important are:

  • Wall construction: Masonry, concrete, timber frame, external thermal insulation composite system? The fixing depends on it.
  • Connection height: Windows, roller shutter boxes, roof overhang and gutters of the house limit how high the pergola can sit on the wall.
  • Base: Existing patio slabs, screed, lawn or gravel, and what lies beneath.
  • Fall: Terraces are rarely exactly level. The post lengths must compensate.
  • Services in the ground: Water, electricity, drains: clarify before drilling and digging.
  • Access: How do long profiles get into the garden? Through the house, via the driveway, with a crane?

How to structure dimensions and equipment in advance is described in Pergola planning step by step.

Step 2: Clarify the permit and development plan

Before ordering, it should be settled whether the structure is exempt from the permit procedure or needs a building application, and whether the development plan fits. These are German rules; you will find the state rules in the overview Does a pergola need a building permit?, and readers elsewhere should check their local building rules. A pergola that has to be reduced or moved after installation is the most expensive variant.

Step 3: Manufacture

Bioclimatic pergolas are made to measure. After final approval of dimensions, colour, louvre direction and accessories, changes are usually no longer possible. Check the order confirmation point by point: dimensions, post positions, wall-mounted or freestanding, colour, LED, sensors, side elements and drainage direction.

Step 4: Preparatory work on site

Foundations

Freestanding posts need foundations sized according to the manufacturer's structural calculation, often pad foundations set below frost depth. The depth and size required depend on structure size, snow and wind load and the ground. Concrete needs time to cure before posts are anchored. Details on the variants are explained in Foundation for the pergola.

If the pergola stands on an existing patio slab, it must be checked whether it can carry the loads. Ordinary patio slabs on grit are not suitable.

Conduits and drainage

Cables are needed for motor, LED, sensors and possibly heaters. Plan conduits to the post before foundations are poured or paving is laid. At the same time, it must be settled where the rainwater from the posts flows: soakaway, infiltration trench or connection to the site drainage.

Step 5: The assembly

The typical sequence during assembly:

  1. Set the posts and anchor them on the foundations, aligned plumb and in line.
  2. Fit the wall profile if the pergola adjoins the house. The fixings must suit the wall build-up; with insulated façades, special mounting systems are needed to avoid thermal bridges and leaks.
  3. Place and connect frame and gutters on the posts.
  4. Insert the louvres and connect them to the linkage.
  5. Fit the drive and adjust it mechanically.
  6. Attach accessories: LED strips, screens, sliding glass walls, covers.

When fixing, metals must be combined in a corrosion-resistant way: small stainless-steel screws in large aluminium components are, according to the Informationsstelle Edelstahl Rostfrei, a favourable pairing; galvanised steel parts should not be connected directly to the aluminium.

Step 6: Electrics, programming, sensors

A qualified electrician makes the connection to the house supply. Then the end positions of the drive are set, remote controls and wall switches are paired and sensors are set up. For pergola automation, Somfy lists wind, sun and rain sensors, for example; details on sensors are in Motorised louvres: rain and wind sensors.

Common mistakes during installation

Many problems that later show up as a leak or a noise arise during assembly. Typical sources of error:

  • Posts not plumb: Even a few millimetres of deviation are transferred to the frame. The louvres then run stiffly or do not close evenly.
  • Wrong fall on the gutters: If water stands in the frame gutter, it overflows in heavy rain, often exactly at the wall connection.
  • Unsuitable plugs in the façade: Insulation, hollow bricks or timber-frame walls need suitable fixing systems. Standard plugs can work loose under wind and snow load.
  • Leaky wall connection: If there is no clean seal between wall profile and façade, water runs behind the profile.
  • Cables without a drip loop: Cables run in from above into devices or posts carry water to the connections.
  • Blocked post outlets: Rubble or mortar residue in the posts later prevents drainage.

A good fitter checks these points during assembly. As the homeowner, you can ask about them specifically at handover.

Preparing for installation day

  • Clear the terrace and remove furniture and planters from the work area.
  • Provide a power supply for tools.
  • Keep the access route and a storage area for long profiles free.
  • Inform neighbours if material will be carried across their property or a crane used.
  • Keep pets and children away from the work area during the work.

Step 7: Acceptance and handover

Take your time over the handover. Check together with the installation team:

  • Dimensions and alignment: Do width, depth, height and post positions match the order confirmation? Are the posts plumb?
  • Louvres: Do all sections open and close evenly and without noise?
  • Water test: Simulate rain with a garden hose: does the water drain through gutters and posts, does it drip at the wall connection?
  • Sensors and lighting: Does the rain sensor respond? Do LED and dimming work?
  • Surfaces: Document scratches, dents or colour deviations.
  • Documents: Operating instructions, maintenance notes, structural proof, warranty terms.
  • Briefing: Emergency operation, winter position, cleaning.

Record open points in the handover protocol, with photos and a deadline for rectification. Keep the protocol, invoice and photos of the foundations and cable routes together; they help with later maintenance, warranty claims or a house sale.

Checklist for homeowners

  1. Prepare the survey appointment with access to terrace, wall and garden.
  2. Clarify the permit question before ordering.
  3. Check the order confirmation in full.
  4. Complete foundations, conduits and drainage on schedule.
  5. Book a qualified electrician for the connection.
  6. Carry out the handover with a protocol and water test.

Your pergola from configurator to installation

Start with your dimensions in the configurator and discuss the survey, installation services and preparatory work via the contact page. Trade businesses that install pergolas themselves can obtain structures through a B2B account.

Frequently asked questions

How long does it take to install a pergola?

The actual assembly of a louvred roof is often done quickly if foundations and connections are prepared. Survey, manufacture, any permit and curing of the foundations take considerably longer; plan the whole process in weeks, not days.

What preparatory work do I have to do as the homeowner?

Usually this means clear access to the terrace, permit questions settled, foundations or a load-bearing base, the power supply for motor and lighting, and a connection point for rainwater. What exactly is part of your order is stated in the quote.

Can I install a louvred pergola myself?

Experienced DIYers can install simple structures if the manufacturer allows it. Foundations, fixing to the façade and the electrical connection, however, require expertise; the electrical connection must be made by a qualified electrician.

What should I look for at handover?

Check dimensions, plumb and alignment, the function of louvres, sensors and lighting, the drainage with a water test, and the surfaces for scratches. Defects should be recorded in the handover protocol.

Sources

  1. Somfy: Pergola-Automatisierung und Sensoren(opens in a new tab)
  2. Informationsstelle Edelstahl Rostfrei: Merkblatt 829 – Edelstahl Rostfrei in Kontakt mit anderen Werkstoffen(opens in a new tab)
  3. BauGB § 30 Zulässigkeit von Vorhaben im Geltungsbereich eines Bebauungsplans(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Pergola Smart Home: Control Your Louvred Roof
Pergolas & planning rules

Pergola Smart Home: Control Your Louvred Roof

Controlling a pergola with smart home: radio standards such as io-homecontrol, hubs, sensors, voice control and useful scenes for louvres, light and heat.

6 minutes read

Cover image: Coastal Pergola: Corrosion Protection and Coatings
Pergolas & planning rules

Coastal Pergola: Corrosion Protection and Coatings

Pergola by the sea: how salt air attacks aluminium, which coating suits C4 and C5, which screws are suitable and how maintenance protects your pergola.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy