Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Front doors

Front Door Panels: Leaf-Covering or Inset Infill, the Differences Explained

7 minutes read

When a front door infill is leaf-covering (an overlay panel), the door panel rests on the leaf frame and hides it, so the door looks as if made in one piece and can usually be insulated more thickly. With an inset infill, the panel sits inside the leaf frame like a pane of glass in a window, and the frame stays visible. Both constructions are technically mature, but they differ in appearance, insulation, price and ease of repair.

What Is a Front Door Infill?

Modern aluminium or uPVC front doors consist of an outer frame (fixed in the wall), a leaf frame (the moving part) and the infill. The infill is usually a sandwich element made of two outer skins, such as aluminium sheet or glass-fibre-reinforced plastic, and an insulating core of rigid foam. It carries the design: motifs, pilasters, glazed cut-outs and handle recesses.

How the infill is joined to the leaf determines the construction:

  • Inset infill: the panel sits in a rebate of the leaf frame and is held by glazing beads.
  • One-sided leaf-covering: the infill covers the leaf frame on the outside; on the inside the frame is visible.
  • Double-sided leaf-covering: the infill covers the leaf inside and out, giving a smooth surface on both sides.

Leaf-Covering Front Door Panels: Advantages and Limits

The leaf-covering infill is now very common on modern front doors. Schüco describes the effect of double-sided covering infills as a "completely flat front without visible frames" inside and out.

Advantages:

  • Calm appearance: no visible joint between infill and leaf frame; only the outer frame remains in view.
  • More insulating material: because the infill covers the frame, it can be made thicker. This often improves the door's U_D value.
  • Design: glazed cut-outs, bar handles and stainless steel applications can be integrated flush.
  • No water on glazing beads: there are no horizontal beads on the outside where dirt and water can collect.

Limits:

  • Price: leaf-covering models generally cost more than comparable inset versions.
  • Repair: the infill is bonded or screwed firmly to the leaf. If it is damaged, replacement is more involved.
  • Weight: thicker infills make the leaf heavier; hinges and adjustment must be designed for this.

One-Sided or Double-Sided?

The one-sided version is a good compromise: outside, the door looks flush, while inside you see the leaf frame, which often suits the interior design. The double-sided version is the highest-quality option, especially if the door is seen as a design feature from the hallway or if the inside is to have a different colour.

Inset Infill: The Proven Classic

Inset infills are the traditional construction and are still common on uPVC front doors. They have their own strengths:

  • Cheaper: less material and simpler manufacture.
  • Replaceable: the infill can be removed and replaced via the glazing beads, for example after damage or for a new design.
  • Classic look: the visible leaf frame suits many existing buildings and side entrance doors.

The drawbacks are the visible joint between infill and frame and, depending on the system, a slightly thinner infill, which can show up in the U-value.

Structure of a Modern Sandwich Infill

Whatever the construction, a high-quality front door infill consists of several layers:

  1. Outer skins, outside and inside: usually aluminium sheet, on uPVC doors also glass-fibre-reinforced plastic or coated boards. They determine surface, colour and impact resistance.
  2. Insulating core: generally a rigid foam. Its thickness is the most important lever for thermal performance.
  3. Reinforcement: depending on the manufacturer, reinforcements for the handle fixing, lock or burglar resistance are built in.
  4. Glazed inserts: insulating glass, with laminated safety glass where security is required.

With leaf-covering infills, this sandwich is bonded or mechanically connected over a large area to the leaf profile. The infill therefore contributes to the stiffness of the leaf. With inset infills, the panel sits in seals and is held by glazing beads; the stiffness comes mainly from the leaf frame.

Why Thickness Matters

A thicker infill insulates better and is often more dimensionally stable too. At the same time the leaf becomes heavier. Make sure the hinges and lock are designed for the leaf weight and that the door is properly adjusted after fitting. Tips are given in the article on adjusting a front door.

Direct Comparison

Feature Inset One-sided leaf-covering Double-sided leaf-covering
Look outside leaf frame visible flush flush
Look inside leaf frame visible leaf frame visible flush
Insulation potential good better usually best
Infill replaceable easy involved involved
Price level lower medium higher

The table describes typical tendencies. What counts is always the data sheet for the specific model, in particular the U_D value for the door in the size ordered.

Effect on Insulation and Funding

The door manufacturer FeBa points out that foamed infills markedly improve the U_D value, while glazed areas tend to worsen it. In Germany, anyone wanting to use BEG funding or the tax bonus under § 35c EStG needs an external door with 1.3 W/(m²K) at most (as at September 2026); readers elsewhere should check their local funding rules. With well-insulated infills, both constructions can achieve this. How the value comes about and what to look for is explained in the article on the U-value of a front door.

In practice this means: never compare doors only by the catalogue value for the range. Two models from the same range can differ in U_D value if one has a large glass strip and the other is solid.

Effect on Security

The construction of the infill alone says nothing about burglar resistance. A resistance class to DIN EN 1627 applies only to the tested complete element. For RC2 doors, any glazing must according to the standard meet at least class P4A to DIN EN 356, and for RC3 at least P5A. Ask, therefore, for the test evidence for exactly the infill chosen, including its glazed cut-out. Background is given in the article on security front doors with RC2 and RC3.

What to Look for When Choosing

  • Check the data sheet: U_D value for the actual door size and the chosen motif.
  • Choose glazed cut-outs deliberately: more glass brings light but costs insulation and requires safety glass. Tips in the article on front door glass.
  • Think about the inside view: if the hallway is to show a smooth door, the double-sided version is worth it.
  • Colour inside and outside: with leaf-covering infills, different colours inside and outside are usually no problem.
  • Upkeep: smooth surfaces are easier to clean than profiled beads.

Conclusion and Next Step

If you want a modern, flush look and the best possible insulation, go for the leaf-covering infill: one-sided as the budget-conscious compromise, double-sided as the premium solution. Inset infills remain a solid, cheaper choice, above all for side entrances and classic façades.

The best approach is to compare the versions directly: in the front door configurator you choose infill type, motif, glass and colour and see the effect on specification and price. Trade businesses with several projects can ask about trade terms via the contact page.

Frequently asked questions

What does leaf-covering mean on a front door?

With a leaf-covering infill, the door panel rests on the leaf frame and hides it. From the covered side you see only a smooth surface; the leaf frame is not visible.

Is a leaf-covering infill better insulated?

Often yes, because the infill can be made thicker and also covers the frame. The actual values are in the data sheet for the model concerned and should always be compared.

One-sided or double-sided leaf-covering: what is the difference?

One-sided leaf-covering means the infill hides the frame on the outside only; on the inside you still see the leaf frame. Double-sided leaf-covering gives a flush look inside and out.

Are inset infills worse?

No. Inset infills are well proven, usually cheaper and often easier to replace if damaged. They do show the leaf frame, however, and often reach slightly weaker insulation values.

Sources

  1. Schüco – Haustüren (flügelüberdeckende Füllungen, Sicherheit, Zutritt)(opens in a new tab)
  2. FeBa – Ud-Wert der Haustür erklärt(opens in a new tab)
  3. Baunetz Wissen – Einbruchhemmende Fenster und Türen(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Front Door U-Value: Requirements and Guide Values
Front doors

Front Door U-Value: Requirements and Guide Values

What U-value does a front door need? The German legal maximum, the 1.3 W/(m²K) funding level, typical values and what affects the U_D value (2026).

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy