Letterbox in the Front Door or in the Sidelight: Which Solution Suits You?
7 minutes read
A letterbox sidelight with a through-the-wall box is usually the best solution on modern front doors: post is posted from outside and taken out dry inside, and the insulated door leaf stays untouched. A letter plate cut directly into the front door, on the other hand, weakens insulation and stability and does not suit every burglar-resistant door. If you have no sidelight, a separate wall-mounted or free-standing letterbox is usually the better choice. The sizes quoted here come from the European standard EN 13724; if you are elsewhere, check your local postal requirements.
The Three Options at a Glance
| Option | Advantages | Disadvantages |
|---|---|---|
| Letter plate in the front door | post lands directly in the hallway, no additional component | intervention in the insulated infill, possible draughts, restrictions on RC doors |
| Through-the-wall letterbox in the sidelight | post inside, dry and secure, door stays untouched | sidelight needed, planning at the time of ordering |
| Separate letterbox (wall, post, fence) | no penetration of the building envelope, flexible | collect post outside, weather exposure |
Letterbox Sidelight: How the Through-the-Wall Box Works
With a through-the-wall letterbox, a posting flap is built into the sidelight on the outside. The post falls through a channel into a collection box mounted inside, which you empty with a key or without a lock. In sidelights with a solid infill, the letterbox is usually integrated directly into the panel; in glazed sidelights, into a solid sub-panel.
Advantages:
- Convenience: post in the dry, no trips outside in the rain.
- Security: with theft protection and a lockable inside box, the post is protected from theft.
- Door stays intact: no weakening of the door infill, no effect on locking or the resistance class of the door leaf.
- Harmonious look: posting flap, bell and nameplate can be combined into a unit in the sidelight.
What to look for:
- Insulation: the through-the-wall box is an opening in the building envelope. Good systems have seals on the inside and outside flaps.
- Width of the sidelight: the sidelight must be wide enough for the letterbox model chosen; see front doors with sidelight and fanlight.
- Burglar resistance: if the whole unit is to be burglar-resistant, the sidelight with letterbox must also belong to the tested specification.
Letter Plate in the Front Door
In many older buildings the letter plate in the door is widespread. On modern, highly insulated front doors it is less common:
- Insulation: the infill is broken through; the channel must be insulated and sealed.
- Draughts: flaps without a good seal let in cold air.
- Security: tools can in some circumstances be inserted through a slot. On burglar-resistant doors, a letter plate is permissible only if it is part of the tested specification.
- Stability: the cut-out weakens the door leaf, which can affect distortion.
If you still want a letter plate, choose a system approved by the door manufacturer with a thermally insulated channel and an inside flap.
Separate Letterbox
A letterbox on the wall beside the door, on a post at the entrance to the plot or on the fence has its own advantages:
- no penetration of door or sidelight,
- delivery staff do not have to enter the plot (if mounted on the fence),
- free choice of model, also for large formats and small parcels,
- easy combination with bell, camera and parcel box.
Disadvantage: you have to fetch the post outside, and the letterbox is exposed to the weather.
Dimensions: What the Standard Recommends
The European standard EN 13724 sets requirements for letterboxes. For the posting opening it gives:
- Width: 230 to 280 mm or 325 to 400 mm,
- Height: 30 to 35 mm,
- Mounting height of the posting opening: between 0.7 and 1.7 m,
- C4 envelopes (229 × 324 mm) should be postable without being folded.
When choosing, make sure the model meets these dimensions so that large letters and catalogues fit too.
Accessibility
For accessible entrances, DIN 18040 requires letterbox, bell and entry phone to be reachable without barriers. In practice this means: posting and collection at an easily reachable height, easy-to-operate flaps and locks, high-contrast labelling. Details in the article on accessible front doors.
Blocks of Flats: Letterbox Unit in the Sidelight
In blocks of flats, whole letterbox units are often integrated into the sidelight of the main entrance door, as a through-the-wall unit with collection in the stairwell. This keeps the entrance tidy and protects the post. Important in planning:
- Number of boxes plus a reserve for later division of flats,
- Bell and entry phone in the same element, with nameplates for each party,
- Structure of the sidelight: large units are heavy and require a stable construction,
- Escape routes: the unit must not restrict the usable width of the entrance,
- Decision of the owners' association, since the unit is generally common property.
Parcel Boxes as a Supplement
Since more and more deliveries come as parcels, many homeowners supplement the letterbox with a parcel box. It is usually free-standing at the entrance or on the fence, because it is too big to build into a sidelight. Plan a weather-protected place for it and clarify how the box is fixed to the wall or ground.
Security Around the Letterbox
- No key in the letterbox: not even "just for a moment".
- Theft protection: prevents post from being pulled out with wire or fingers.
- Inside handle out of reach: with a through-the-wall box near the door, the door handle must not be reachable from the posting flap.
- Holidays: have the letterbox emptied, because an overflowing letterbox signals absence. More tips in the article on front doors and burglary statistics.
Planning Tips
- Decide early: the letterbox in the sidelight must be planned in when the door unit is ordered.
- Bundle with technology: bell, entry phone, nameplate and house number in the same panel look tidy.
- Plan cable routes: provide conduits for bell and camera.
- Check the inside box: size, lock and removal height suited to your hallway.
- Weather protection: a canopy protects the posting flap and the post while it is being posted; see canopies and entrance areas.
Retrofitting: Can a Letterbox Go into an Existing Sidelight?
A retrofit is possible only if the sidelight has a solid infill that can be cut out or replaced. With insulating glass sidelights, a cut-out is not an option; the glazing would have to be swapped for a panel with a letterbox. Clarify with the manufacturer whether a suitable replacement panel is available and how the conversion affects insulation and, where applicable, the resistance class.
Care
Clean posting flaps with springs and seals once a year and lightly lubricate the hinges so that they do not squeak or stick. Also check whether the inner flap still closes tightly, because a jamming flap is a common cause of draughts in the hallway. Look after stainless steel fittings like the door handles.
Checklist
- Option chosen: sidelight, door or separate letterbox
- Sidelight width suited to the letterbox model
- Posting dimensions to EN 13724, C4 unfolded
- Insulated through-the-wall box with seals
- Theft protection, lockable inside box
- For an RC unit: letterbox part of the tested specification
- Bell and entry phone planned in the same element
Put together your front door with sidelight in the configurator and ask about special requests such as letterbox integration via the contact page.
Frequently asked questions
Is a letter plate in the front door a good idea?
A letter plate weakens the insulated infill, is a possible spot for draughts and can affect the test of burglar-resistant doors. That is why it is chosen less often on modern front doors than a through-the-wall box in the sidelight or a separate letterbox.
What size should the posting opening of a letterbox be?
The European standard EN 13724 gives a width of 230 to 280 mm or 325 to 400 mm and a height of 30 to 35 mm for the posting opening. C4 envelopes should be postable without being folded.
Does a letterbox in the sidelight worsen insulation?
A through-the-wall letterbox is a penetration of the sidelight. Well-insulated systems with seals and flaps limit the heat loss. Ask for the characteristic values of the sidelight with letterbox.
Can anyone reach into a through-the-wall letterbox?
High-quality through-the-wall letterboxes have theft protection and a lockable collection box inside. Make sure that nobody can pull mail out from outside or reach the inside handle of the door.
Sources
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.