Mushroom-head locking: how security hardware prevents windows from being levered open
6 minutes read
Mushroom-head locking consists of cams with a mushroom-shaped head on the window sash which, when the window is closed, engage in steel security keeps on the frame and hook in there. As a result the sash can no longer be levered out of the frame, the most common attack on windows. Simple roller cams only hold the window tight but offer hardly any resistance to a screwdriver. The retrofit standard cited here (DIN 18104) is German; UK readers should ask their installer which equivalent products and certifications apply.
Mushroom-head locking is therefore the core of every burglar-resistant window and can also be retrofitted to many windows.
How tilt-and-turn hardware locks
When you turn the window handle, a gearbox moves a continuous drive rod in the sash rebate. Cams sit on this rod. In the closed position the cams move behind keeps that are screwed to the outer frame. In this way the sash is pulled against the frame at several points.
On standard windows these are often roller cams: small rollers that run behind a simple strike plate. They provide contact pressure and airtightness, but they do not engage firmly in the keep. If a burglar places a screwdriver between sash and frame, the cam simply rolls out of the strike plate.
What makes the mushroom head different
A mushroom cam has a wider head on a narrower shaft, like a mushroom. The matching security keep has a groove into which the head moves and where it hooks behind.
| Feature | Roller cam | Mushroom cam |
|---|---|---|
| Shape | cylindrical roller | head with undercut |
| Counterpart | simple strike plate | security keep of steel |
| Function | contact pressure, airtightness | contact pressure, airtightness and hooking in |
| Protection against levering | low | high |
| Material | steel or die-cast zinc | hardened steel |
According to specialist information, the mushroom head works in both directions: it holds the sash both against being levered outwards and against being pushed inwards.
The keeps are just as important
A mushroom cam is only as good as the keep it engages in. Security keeps are made of steel and anchored deep in the frame with several screws, on uPVC windows preferably in the steel reinforcement. A keep that sits only in the thin plastic wall tears out under levering. When retrofitting, it is therefore necessary to check whether reinforcement is present and where it runs.
Where the locking points sit
In a break-in, the burglar tries to start at the weakest point. Security hardware therefore distributes the mushroom cams all round:
- Handle side: top, middle and bottom
- Top: at the stay that allows tilting
- Bottom: at the lower sash edge
- Hinge side: opposite the handle, where standard windows often do not lock at all
How many cams are needed depends on the window size; larger sashes need more points because long profiles flex more under levering force. For RC2 windows, the points are placed so that no gap remains between them where a lever could be applied. The number results from the testing of the respective hardware system.
Mushroom-head locking in the overall system
The locking is one building block, not a cure-all. For a burglar-resistant window to EN 1627, the following work together:
- Mushroom cams and security keeps against levering
- Lockable handle against reaching through and manipulation, see lockable window handles
- Drill protection in front of the gearbox
- Glazing to P4A for RC2, see RC2 or RC2 N
- Professional installation with sufficient fixing in the wall
The German police recommend windows from RC 2 for residential buildings and, for retrofits, tested security hardware to DIN 18104 in combination with lockable handles.
Retrofitting: possibilities and limits
DIN 18104 regulates retrofittable security devices for windows and doors in two parts:
- DIN 18104-1: surface-mounted retrofit products, for example supplementary locks or bar locks, which are visibly mounted on sash and frame. At least one device on the hinge side and one on the handle side is recommended.
- DIN 18104-2: retrofit products in the rebate, that is, replacing cams and keeps in the hardware: the mushroom-head locking.
The in-rebate solution is invisible and easy to use, because the window is still opened only via the handle. It assumes that the existing hardware is suitable and that the keeps can be anchored securely in the frame. On older windows with weak frames or without steel reinforcement it reaches its limits. Then surface-mounted devices or window replacement are the better choice. A specialist firm can assess on site which variant suits your windows.
Have the retrofit carried out by a specialist firm, ideally one listed by the police as an installer. Many police advice centres keep lists of this kind and offer free on-site consultations in which you learn which windows in your house should be secured first. In the UK, ask about firms that supply products tested to PAS 24.
Why the hinge side matters so much
On the hinge side sit the corner hinges and the stay from which the sash hangs. Many standard windows do not lock there at all, because the hinges hold the sash anyway. For a burglar, though, this side is just as interesting: if he places the lever between the hinges, he can push the sash out of the frame at this point. Security hardware therefore also has mushroom cams on the hinge side, and high-quality systems additionally secure the corner hinges against being lifted out. When retrofitting to DIN 18104-2, this side should not be missing.
How to recognise your locking
Whether your windows have mushroom or roller cams you can see for yourself: open the sash and look at the end face of the sash frame. Roller cams are small, round cylinders, often with a rotating sleeve. Mushroom cams have a clearly widened head. On the frame you recognise security keeps by their solid construction and the groove the head engages in. Also count whether there are any locking points on the hinge side at all; on many older windows they are missing there entirely.
Care and adjustment
Mushroom cams are often mounted eccentrically. By turning with a suitable tool, the contact pressure of the sash against the seal can be adjusted, for example if the window draughts in winter or closes stiffly in summer. Specialists recommend servicing the hardware every one to two years: lubricate moving parts, check the contact pressure, check the keeps for wear. How to go about it is explained in the article on adjusting and maintaining windows.
Checklist
- Check existing windows: roller cams or mushroom cams?
- Locking points all round, including the hinge side
- Security keeps of steel, anchored deep in the frame
- Combine with a lockable handle and drill protection
- Retrofit to DIN 18104-2 by a specialist firm
- Service and adjust the hardware regularly
- After adjusting, check that all cams move cleanly into the keeps and the window closes smoothly
For new windows, choose the security equipment directly in the configurator. Our team answers questions about hardware and resistance classes via the contact page.
Frequently asked questions
What is mushroom-head locking?
A locking system in which cams with a mushroom-shaped head on the window sash engage in steel security keeps on the frame. The undercut head hooks into the keep and prevents the sash from being levered out of the frame.
What is the difference between roller cams and mushroom cams?
Roller cams only run behind the keep and hold the sash tight, but offer hardly any resistance to levering. Mushroom cams, by contrast, hook into the security keep and hold the sash firm even under levering attacks.
How many mushroom cams does an RC2 window have?
That depends on the window size. The locking points are distributed all round, that is, on the handle side, top, bottom and hinge side. For usual window sizes there are several cams per sash.
Can mushroom cams be retrofitted?
On many uPVC and timber windows with tilt-and-turn hardware, yes: roller cams are replaced with mushroom cams and matching security keeps are fitted. The keeps must be screwed firmly into the frame, on uPVC windows into the steel reinforcement.
Sources
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.