Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Pergolas & planning rules

Pergola LED Lighting: How to Plan the Light in a Louvred Roof

6 minutes read

Good LED lighting in a pergola makes the terrace usable in the evening without glare. Proven approaches are indirect LED strips in the frame for background light, dimmable warm white light for mood and targeted accents over the table. Plan lights, cable routes and controls when you order – integrated solutions in the frame or in the louvres look cleaner and are better protected from the weather than retrofitted fairy lights.

Which types of lighting are available

Manufacturers of louvred roofs offer several variants. Renson, for example, lists LED light in the roof frame, LED in the roof louvres and vertical LED lighting on the posts. The basic types:

Type of light Installation location Effect Suitable for
Continuous LED strip Inside of the frame indirect, even background light Atmosphere, orientation
LED in the louvres in or on the louvre profiles light spread across the roof surface Dining table, large-area light
Spots in the frame or on beams directional light Accents, table lighting
Post lighting vertical in or on posts Contours, orientation Transitions, paths
RGB/colour change usually strips Colour effects Parties, special occasions

With louvre LEDs, the lighting effect changes with the louvre position. Closed, the light shines downwards; open, it partly shines upwards into the sky. Some manufacturers also combine lights with further functions: Renson offers "Beam Heat & Sound", for example, an element that combines infrared heating and loudspeakers. Such combination units are manufacturer-specific and not compatible with every system.

Planning pergola LED lighting: three layers of light

As in a living room, light on the terrace works best in layers:

1. Background light

A continuous, indirect light in the frame provides orientation and calm basic brightness. It does not dazzle because the light source is hidden.

2. Task light

Over the dining table or barbecue you need more light. Spots or the louvre LED above the table do this. Dimmability is important here: it may be brighter during the meal, cosier afterwards.

3. Accent light

Post lighting, lights in adjoining beds or an illuminated wall create depth. That way the terrace does not look like a lit island in the dark garden in the evening.

Colour temperature and dimming

  • Warm white with a low colour temperature feels cosy in the evening and is the usual choice for terraces.
  • Neutral white is better suited to task light, for example at an outdoor kitchen.
  • Dimmable is something all patio lighting should be. The same light then goes from task light to mood light.
  • Tunable white lets you change the colour temperature. That is convenient, but not essential.

IP rating: how weatherproof the lights must be

The IP rating under DIN EN 60529 (IP code) describes how well a light is protected against foreign bodies and water:

IP rating Protection against foreign bodies Protection against water
IP44 Foreign bodies from 1 mm Splashing water from all directions
IP54 Dust in harmful quantities Splashing water from all directions
IP65 dust-tight Water jets from any angle
IP67 dust-tight temporary immersion

Under a closed louvred roof, lights are protected from direct rain, but not with the louvres open, in driving rain or during cleaning. What counts is what the manufacturer specifies for the installation situation. For lights that can be directly exposed to the weather, a high IP rating makes sense.

Electrical installation and controls

  • Supply cable: the pergola needs a power supply – ideally together with the louvre motor through a conduit in the foundation or through the wall.
  • Qualified contractor: work on the fixed electrical installation may only be carried out by a qualified electrician. Outdoor circuits should be protected by a residual current device (RCD).
  • Controls: lighting can be controlled by wall switch, remote control or app. With a smart-home hub such as Somfy TaHoma you can combine light, louvres and screens in scenarios; more on this in the article Rain and wind sensors for the pergola.
  • Cable routing: integrated systems route cables hidden through frame and posts. Retrofitted lights often need visible cable trunking.

Consideration for neighbours and nature

Patio light carries beyond your own plot. Under § 906 BGB (the German Civil Code), neighbours need only tolerate effects from another plot where they do not impair use, or do so only insignificantly. Glaring light pointed at neighbours' windows can trigger disputes. More in the article Pergola and neighbour law.

Insects also react to light. Warm white light with little blue content, downward-pointing and shielded lights, and switching off late at night – by timer or motion detector, for example – reduce the effect on nocturnal animals. With the louvres open, louvre LEDs partly shine into the sky; close the louvres in the evening when you need a lot of light.

Example: lighting for a pergola with a dining table

A louvred pergola of 4.5 m × 3.5 m covers a dining table for six and a lounge corner. A balanced lighting plan could look like this:

  • Background light: a continuous, warm white LED strip in the frame, dimmable, as orientation light when stepping onto the terrace.
  • Table light: LED in the louvres or two to three spots directly above the table, separately switchable. Brighter for eating, dimmed down afterwards.
  • Lounge corner: just the dimmed background light, complemented by a rechargeable floor lamp that can be placed flexibly.
  • Transition to the garden: a low, shielded path light so that steps can be seen safely.

Separate circuits or channels for background light and table light are the key. Only then can the mood be adapted to the situation instead of always switching everything on at once.

Care of the lighting

LED lights are low-maintenance but benefit from occasional care. Cobwebs and pollen on covers noticeably dim the light. Clean the lights together with the pergola using a soft, damp cloth and no pressure washer – the IP rating is designed for water jets only to the extent stated by the manufacturer. Check cable glands for damage at the same time.

Avoiding planning mistakes

  • Too much light: very bright, uniform lighting quickly looks like building-site light. Better to have several dimmable layers.
  • Glare: bare spots at eye level are a nuisance. Shield lights or use them indirectly.
  • No reserve: plan conduits for later extensions such as patio heaters or loudspeakers.
  • Forgetting screens: closed screens reflect light – the effect changes.

Checklist for your lighting plan

  1. Define the use: dining, reading, barbecuing, relaxing?
  2. Plan background light in the frame.
  3. Position task light over the table.
  4. Choose colour temperature and dimmability.
  5. Check the IP rating against the installation situation.
  6. Plan power supply and conduits together with the foundation.
  7. Define controls and scenarios.
  8. Show consideration for neighbours and insects.
  9. Provide a reserve for later extensions such as heating or audio.

Next step

In the pergola configurator you select the lighting option directly with your pergola. That way the cable routing is planned in from the start. How the lighting fits into the overall concept is shown in the article Pergola planning step by step.

Frequently asked questions

Which colour temperature is ideal for the patio?

For a cosy evening mood, warm white light with a low colour temperature is suitable. Warm white light with little blue content is also considered more insect-friendly than cool white.

Which IP rating do LED lights in a pergola need?

The IP rating depends on the installation situation and the manufacturer's specifications. IP44 protects against splashing water, IP65 additionally against water jets and dust; with direct weather exposure a higher rating makes sense.

Can I retrofit the LED lighting later?

Partly, depending on the system. Integrated LED profiles in the frame or louvres and the cable routing are easiest to plan in when ordering.

Who may connect the lighting?

Connection to the fixed house wiring belongs in the hands of a qualified electrician. That also applies to the supply cable to the pergola and to outdoor sockets.

Sources

  1. Renson: Lamellendächer – Beleuchtungsoptionen(opens in a new tab)
  2. Wikipedia: IP-Schutzart nach DIN EN 60529(opens in a new tab)
  3. Somfy: Pergola motorisieren und automatisieren(opens in a new tab)
  4. § 906 BGB – Zuführung unwägbarer Stoffe (Gesetzestext)(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Pergola Rain Sensor & Wind Sensor: Smart Louvres
Pergolas & planning rules

Pergola Rain Sensor & Wind Sensor: Smart Louvres

Pergola with rain, wind and sun sensors: how motorised louvres close automatically. Sensor types, installation, settings and the limits of automation.

6 minutes read

Cover image: Zip Screen Pergola: Wind, Privacy & Insect Shield
Pergolas & planning rules

Zip Screen Pergola: Wind, Privacy & Insect Shield

Zip screens for pergolas: how the zip guide works, which fabrics are available, how wind-resistant they are and what to consider when planning your screens.

6 minutes read

Cover image: Freestanding or Wall-Mounted Pergola: Pros & Cons
Pergolas & planning rules

Freestanding or Wall-Mounted Pergola: Pros & Cons

Freestanding pergola or attached to the house wall? Pros and cons for structural design, façade, drainage, side elements, permission and planning compared.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy