Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Pergolas & planning rules

Pergola with Rain Sensor and Wind Sensor: How Motorised Louvres Control Themselves Automatically

6 minutes read

A rain sensor on a pergola detects precipitation and closes the motorised louvres automatically – even when nobody is home. Together with wind and sun sensors you get a louvred roof that reacts to the weather by itself: it closes when it rains, retracts screens in strong wind and shades in blazing sun. The prerequisites are an electric motor, a compatible control system and a correctly placed sensor.

Why sensors make particular sense with a louvred roof

A bioclimatic pergola lives by its roof adapting to the weather. Without automation, that depends on someone being at home and reacting in time. A summer thunderstorm often arrives faster than expected, and if you are at the office you can neither close louvres nor retract screens. Sensors close that gap. They do not replace operation but take it over at the moments when it matters.

Which sensors are available for pergolas

Drive manufacturers such as Somfy offer several sensor types for patio applications. The most important are:

Sensor type What it measures Typical response Examples from the Somfy range
Rain sensor Moisture on the sensor surface Louvres close Ondeis (230 V AC or 24 V DC, wired)
Wind sensor Wind speed via anemometer Retract screens, louvres to protective position Eolis io 230 V, Eolis WireFree io
Movement/vibration sensor Movement at the component Move to protective position Eolis 3D WireFree io
Sun sensor Brightness Tilt louvres or extend screens Sunis WireFree II io, Soliris

Somfy also offers a complete sensor package for sun, wind and rain. Whether a particular sensor works with your pergola depends on the installed motor and its radio protocol – with Somfy, io-homecontrol or RTS, for example.

Pergola rain sensor: how the automation works

The rain sensor has a sensing surface that reacts to moisture. When rain falls on it, it reports this to the control unit and the louvres move to the closed position. The water then runs over the louvre profiles into the gutter and away through the posts.

When the rain stops and the sensor surface dries, the control unit can, depending on programming, open the louvres again. Renson describes the same sequence for its systems: the rain sensor closes the louvres automatically when precipitation is detected.

Practical benefits:

  • Protection of furniture: cushions stay dry, even in an unexpected shower.
  • Less water indoors: with the patio door open, no rain gets from the pergola into the house.
  • Convenience: you do not have to get up or open the app.

Wind sensor: protection for screens and structure

With louvred roofs, the wind sensor is mainly important for the side elements. Zip screens have a wind resistance stated by the manufacturer; if it is exceeded, the sensor retracts them automatically. Somfy describes the function like this: the system moves to the protective position immediately when wind speed exceeds a preset value. The threshold is adjustable and should match the wind resistance class of the weakest component.

Which louvre position is right in a storm is specified by the pergola manufacturer. More on wind loading in the article Wind load and pergolas.

Sun sensor: automatic shading

A sun sensor measures brightness. Somfy describes how the Sunis WireFree II io can close or adjust the louvres automatically in strong sunshine. This is particularly useful for pergolas in front of large window areas: the shading then also works for the rooms behind. Combined with zip screens, low evening sun can be shielded from the side.

Retrofit or order straight away?

Sensors can often be retrofitted if a compatible motor is installed. Even so, it is worth deciding on the automation when ordering:

  • Cable routes: wired sensors need a cable to the control unit. Routed inside the frame or through a post, it looks cleaner than cabling run on the outside afterwards.
  • Radio protocol: motor, sensors and remote control must speak the same language. If you want to use a smart-home hub later, choose the protocol deliberately.
  • Mounting points: a sensor needs a fixed place on the frame. Prepared brackets make installation easier.
  • Power supply: if an electrician is coming for the motor anyway, they can connect wired sensors in the same visit.

Battery-powered wireless sensors, on the other hand, are a good choice if you want to expand later and do not want to lay cables. Remember to change the batteries regularly.

Installing and setting up correctly

  1. Exposed position: rain and wind sensors must stand freely in the weather – not in the lee of the house wall, under trees or under a roof overhang.
  2. Keep accessible: sensors should be reachable for cleaning. Leaves, pollen and dirt on the sensing surface can cause false triggering.
  3. Adjust thresholds: set the wind value to suit the screens and the sun value to your preferences.
  4. Set priorities: wind and rain protection should take priority over comfort functions.
  5. Connect professionally: wired 230 V sensors belong in the hands of a qualified electrician. Wireless versions with battery or solar cell simplify retrofitting.

Limits of automation

Sensors make the pergola more comfortable, but not infallible:

  • Power cut: without power, no movement. When a storm warning is issued, move manually to the safe position.
  • Frost and snow: iced-up louvres should not be moved. Pause the automation in frosty periods unless the control unit does so itself. More in the article Pergola in winter.
  • First drops: a few seconds pass until the louvres are closed.
  • Dew and fog: strong moisture on the sensing surface can, depending on the sensor, trigger closing although it is not raining. Check the settings and the mounting location.
  • Safety: automation does not replace adequate structural design. The structure must carry the loads even without a sensor.

Smart home: scenarios instead of single commands

With a central control unit such as Somfy TaHoma, sensors, pergola, lighting and screens can be combined into scenarios. Somfy cites control by app, voice assistant and scenario at the press of a button. Examples:

  • "Away": louvres close, screens retract, light off.
  • "Dinner": louvres half open, LED dimmed, screen on the west side extended.
  • "Winter": sun automation off, wind and rain protection active.

How to integrate light into the pergola is covered in the article LED lighting in louvred roofs.

Checklist: sensors for your pergola

  1. Motorised drive present or planned?
  2. Check the radio standard of motor and sensors.
  3. Choose rain, wind and sun sensors as needed.
  4. Fix the mounting location exposed to the weather.
  5. Clarify the power supply: wired, battery or solar.
  6. Set the wind threshold to suit the screens.
  7. Define winter operation in the control unit.

Next step

In the pergola configurator you choose the louvre drive and add lighting, screens and glass walls. In your enquiry, state which sensors and which control system you want to use so that drive and accessories fit together. You will also find all products and options in the online configurator.

Frequently asked questions

How quickly does a rain sensor close the louvres?

The sensor detects moisture and issues the close command immediately; the louvres then need a few seconds. In sudden heavy rain, the first drops can still get through.

Does the automation also work in a power cut?

No. Without power, motor and sensors cannot work. When a storm warning is issued, you should move the pergola to the position recommended by the manufacturer as a precaution.

Where is the rain sensor fitted?

Exposed to the rain, usually at the top of the pergola frame, not in the shelter of the house wall or under trees. Only then does it detect precipitation reliably.

Can I combine the rain sensor with a smartphone?

Yes, if motor and sensors share a radio standard, they can be integrated into control systems such as Somfy TaHoma. There you can create scenarios and notifications.

Sources

  1. Somfy: Pergola motorisieren und automatisieren(opens in a new tab)
  2. Somfy: Sensoren für Terrasse und Markise(opens in a new tab)
  3. Somfy: Windsensor für Markise und Terrasse(opens in a new tab)
  4. Renson: Lamellendächer – Produktinformationen und FAQ(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Freestanding or Wall-Mounted Pergola: Pros & Cons
Pergolas & planning rules

Freestanding or Wall-Mounted Pergola: Pros & Cons

Freestanding pergola or attached to the house wall? Pros and cons for structural design, façade, drainage, side elements, permission and planning compared.

6 minutes read

Cover image: Pergola LED Lighting: Patio Lighting Plan
Pergolas & planning rules

Pergola LED Lighting: Patio Lighting Plan

Plan LED lighting for your pergola: strips in the frame, louvre LEDs, colour temperature, dimming, IP rating and insect-friendly patio light explained.

6 minutes read

Cover image: Pergola Foundation: Pad, Slab or Wall Mount?
Pergolas & planning rules

Pergola Foundation: Pad, Slab or Wall Mount?

Which foundation does your pergola need? Pad foundations, concrete slab or wall mounting compared – with frost depth, anchoring, drainage and a checklist.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy