Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Pergolas & planning rules

Pergola Permission in Rhineland-Palatinate: What the LBauO and Boundary Setbacks Mean for Your Louvred Roof

6 minutes read

A pergola needs no permission in Rhineland-Palatinate (Germany) if it is open – under § 62 para. 1 no. 7 c LBauO (the state building code), pergolas are exempt from permission. For roofed pergolas, such as those with a louvred roof, there is a peculiarity: Rhineland-Palatinate limits patio covers not by area but by volume. Ground-level, unheated patio covers are exempt from permission up to 50 m³ of enclosed space – on residential buildings of building classes 1 to 3 and not in the outlying area (as of September 2026). This article covers German law; readers in the UK or elsewhere should check the rules of their local planning authority.

Regardless of this, setback distances of at least 3 m, the development plan and structural requirements must be met.

The rules in § 62 LBauO

The Rhineland-Palatinate state building code distinguishes several cases relevant to garden and terrace:

Reference Development Condition
§ 62 para. 1 no. 1 a Buildings without habitable rooms up to 50 m³, in the outlying area up to 10 m³ of enclosed space
§ 62 para. 1 no. 7 c Garden-design structures such as pergolas no size stated
§ 62 para. 1 no. 11 m minor structures such as uncovered terraces –
§ 62 para. 2 no. 2 ground-level, unheated extensions such as conservatories and patio covers up to 50 m³ of enclosed space on residential buildings of building classes 1–3, not in the outlying area

§ 62 para. 3 LBauO makes clear: exemption from permission does not release you from the obligation to meet all building-law and other public-law requirements.

Pergola permission in Rhineland-Palatinate: understanding the 50 m³ rule

Because the limit is given in cubic metres, height plays a role. In simplified terms, the enclosed space is floor area times height. How exactly the building authority calculates for sloping roofs or overhangs is something you should ask beforehand if in doubt.

Width × depth Floor area Height Enclosed space (simplified) Up to 50 m³?
4.00 m × 3.50 m 14.0 m² 2.50 m 35.0 m³ Yes
5.00 m × 4.00 m 20.0 m² 2.50 m 50.0 m³ Limit value
5.00 m × 4.00 m 20.0 m² 2.80 m 56.0 m³ No
6.00 m × 3.00 m 18.0 m² 2.70 m 48.6 m³ Yes

The examples show that in Rhineland-Palatinate a few centimetres of height can decide whether permission is needed. A lower headroom can allow a larger floor area – conversely, a tall pergola costs area.

What "ground-level" and "unheated" mean

  • Ground-level: the cover must be at ground level. Covers over roof terraces or balconies do not fall under this rule.
  • Unheated: a permanently installed heating system turns the cover into a different kind of extension. Whether a single patio heater changes the classification is not expressly regulated – clarify this with the building authority if needed.
  • Extension: the provision speaks of extensions (Anbauten). For a freestanding cover in the garden you should also clarify the classification beforehand.

Boundary setbacks under § 8 LBauO

In building law a patio cover is regularly a building and must therefore keep setback areas:

  • Depth of the setback area: 0.4 H, in commercial and industrial areas 0.25 H – in all cases at least 3 m (§ 8 para. 6 LBauO).
  • Structures on the boundary (§ 8 para. 8): garages without fireplaces and other buildings without habitable rooms and fireplaces may be built on the property boundary or up to 3 m from it if they do not exceed an average wall height of 3.20 m and a length of 12 m along one boundary; at most 18 m in total is permitted. Whether your cover counts as such a building is judged by the building authority case by case.
  • Planning law: if the development plan or the surrounding buildings allow building on the boundary – typical for semi-detached and terraced houses – special rules apply.

For detached houses, the safe rule of thumb is: at least 3 m from every neighbouring boundary. For details on measuring and special cases, see the article Pergola on the property boundary.

Development plan, heritage protection and outlying areas

Also check:

  • Development plan: building lines, site coverage ratio and design requirements also apply to covers that are exempt from permission.
  • Outlying area: the 50 m³ rule does not apply to residential buildings in the outlying area. Buildings without habitable rooms are exempt from permission there only up to 10 m³.
  • Heritage protection: in historic village centres – for example in many wine-growing municipalities – a heritage-law permit is often needed.
  • Condominium ownership: in an owners' association you generally need a resolution under § 20 WEG (the German Condominium Act).

Structural design: snow and wind in Rhineland-Palatinate

Rhineland-Palatinate ranges from mild locations on the Rhine to the uplands of the Eifel, Westerwald and Hunsrück. Snow load rises markedly with altitude above sea level. A pergola must be designed for the loads at the specific site, even if it is exempt from permission. How to determine the snow load of your location is explained in the article Snow load on pergolas.

Conservatory or patio cover?

§ 62 para. 2 no. 2 treats conservatories and patio covers together as long as they are ground-level, unheated and no larger than 50 m³. That makes Rhineland-Palatinate comparatively straightforward for pergolas with sliding glass walls. Note, though: heating or use as a living space takes you out of the exemption.

Planning example: making the best use of the 50 m³

Suppose your terrace is 6 m wide and 4 m deep, and you would like a louvred pergola over the whole area. With 24 m² of floor area, the height, in simplified terms, could be at most about 2.08 m to stay under 50 m³ – too low for comfortable headroom.

You have three options:

  • Reduce the area: at 5 m × 4 m and 2.50 m height you land exactly at 50 m³. The edge of the terrace stays open and can be complemented with a parasol.
  • Reduce the depth: at 6 m × 3.20 m and 2.50 m height you reach 48 m³. The cover protects the seating area right by the house.
  • File a building application: if the full area matters, plan for the permit procedure from the start.

Which option makes sense depends on how you use the terrace. Measure out table, chairs and walkways before you decide.

Checklist for Rhineland-Palatinate

  1. Check building class and location: residential building of classes 1–3, not in the outlying area?
  2. Fix width, depth and height and calculate the enclosed space.
  3. Stay under 50 m³ – if in doubt, plan with a slightly lower post height.
  4. Measure the distance to every neighbouring boundary: as a rule at least 3 m.
  5. Check the development plan and heritage protection.
  6. Do not plan a fixed heating system if you want to use the exemption.
  7. Have the structural design for snow and wind load at the site confirmed.

The development plan and the local building authority always have the final say; this article does not replace legal advice. How other states regulate the question is shown in our overview by state.

Next step

In the pergola configurator you set width, depth and post height separately. That way you can choose the dimensions so that your cover stays under 50 m³, and then add colour, drive and equipment. With the finished configuration you request your quote.

Frequently asked questions

Why does Rhineland-Palatinate measure patio covers in cubic metres?

§ 62 para. 2 no. 2 LBauO limits ground-level, unheated extensions such as patio covers to 50 m³ of enclosed space instead of a floor area. Height therefore counts as well as width and depth.

Does the 50 m³ rule apply to every building?

No. It applies only to residential buildings of building classes 1 to 3 and not to residential buildings in the outlying area (as of September 2026).

How far from the boundary must a patio cover be in Rhineland-Palatinate?

Under § 8 para. 6 LBauO the setback area is 0.4 H, but in all cases at least 3 m. Exceptions exist, for example, where planning law allows building on the boundary.

Is an open pergola exempt from permission in Rhineland-Palatinate?

Yes. § 62 para. 1 no. 7 c LBauO names pergolas as garden-design structures that need no building permission.

Sources

  1. § 62 LBauO Rheinland-Pfalz – Genehmigungsfreie Vorhaben (Gesetzestext)(opens in a new tab)
  2. § 8 LBauO Rheinland-Pfalz – Abstandsflächen (Gesetzestext)(opens in a new tab)
  3. Landesrecht Rheinland-Pfalz: § 62 LBauO(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Pergola Permission in Bavaria: What the BayBO Allows
Pergolas & planning rules

Pergola Permission in Bavaria: What the BayBO Allows

Pergola permission in Bavaria, Germany: what Art. 57 BayBO says on patio covers and pergolas, which setbacks apply and where the pitfalls lie (as of 09/2026).

6 minutes read

Cover image: Pergola Boundary Distance: Setback Rules Explained
Pergolas & planning rules

Pergola Boundary Distance: Setback Rules Explained

How far from the boundary must a pergola be? Setback areas, 0.4 H, minimum distances by German state, building on the boundary and neighbour consent explained.

7 minutes read

Cover image: Patio Cover Permission in NRW: Building Code Rules
Pergolas & planning rules

Patio Cover Permission in NRW: Building Code Rules

Patio covers and pergolas in North Rhine-Westphalia: when are they exempt under § 62 BauO NRW (30 m², 4.50 m depth)? Setbacks, conservatories and a checklist.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy