Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Costs & buying guides

Windows from Poland, Turkey or Germany: How to Recognise Real Quality

7 minutes read

With windows from Poland, Turkey or Germany, the country of origin alone does not decide quality. What counts is the profile system, glass and hardware used, the care taken in production, the values declared in the declaration of performance to EN 14351-1 and a service that works. A window from a well-run factory in Poland or Turkey can equal a German window, and conversely a German window can have defects. The rules described here are those of the EU and German market; if you are buying in the UK, the marking and approval rules are different, so check which apply.

This article shows which conditions are the same for every country of origin, where real differences lie and how to assess quotes objectively.

What Applies to All Windows on the EU Market

Windows and external doors are harmonised construction products. Anyone placing them on the EU single market must, under the European Construction Products Regulation, draw up a declaration of performance and affix CE marking. The Tübingen regional authority (Regierungspräsidium), as the market surveillance body, stresses that this obligation has applied to windows and external doors under DIN EN 14351-1 since 1 February 2009. The declaration of performance states, among other things, the thermal transmittance, air permeability, watertightness against driving rain and resistance to wind load.

Since 8 January 2026 the new Construction Products Regulation (EU) 2024/3110 has also applied. According to the DIBt (German Institute for Building Technology), for products whose harmonised standards were drawn up under the old regulation, the previous rules on declaration of performance and CE marking continue to apply for the time being (as at September 2026). More in the article CE marking and declaration of performance for windows.

That means: whether a window was made in Poland, Turkey, Greece or Germany, it must meet the same rules if it is sold here.

The Countries at a Glance

Poland

Poland has numerous window factories that also produce for customers in Germany. Many of them process profile systems from well-known European system suppliers and branded hardware; which system a factory actually uses should be stated in the quote. As an EU member, Poland supplies within the single market without customs formalities. Differences exist between individual factories, not between "Polish" and "German" quality as such.

Turkey

Turkey has a large aluminium and uPVC fabrication industry. A customs union for industrial goods has existed with the EU since 1996; Turkey has undertaken to align its technical regulations within the scope of the customs union with EU law. As a non-EU member, however, goods are imported and cleared through customs, and import VAT is payable. The same requirements for CE marking and declaration of performance apply to windows sold in the EU. Make sure the declaration of performance and fitting instructions are available in German. On import, the importer takes on certain obligations, such as for marking and the necessary documents.

Germany

Germany has a long tradition in window making, and many profile and hardware makers are based here. "Made in Germany" stands for short distances, German contacts and often regional fitting firms. It does not automatically guarantee better workmanship than a factory abroad using the same profile system.

The Real Quality Features

Feature What to look for
Profile system Manufacturer and system named, frame depth, chambers, seal layers
Reinforcement Steel or composite reinforcement to manufacturer's specification, especially with dark colours
Glass Make-up, Ug value, warm edge, safety glass where needed
Hardware Branded hardware, number of security bolts, RC class
Workmanship clean corner welds, even seals, correctly packed glazing
Declaration of performance complete, matching the product, available in German
Service Spare parts, readjustment, a reachable contact

More on profiles and how they differ is explained in the article uPVC window profiles compared.

Where Real Differences Lie

Logistics: longer transport routes raise the risk of transport damage and can delay replacement deliveries. Check how spare parts and replacement panes are supplied.

Communication: for technical queries or complaints, a German-speaking contact is worth their weight in gold. Clarify beforehand who your contracting partner is and in what language contracts, invoices and documents are issued.

Warranty: your statutory rights in respect of defects lie against your seller. If you buy from a German dealer who has the windows made abroad, that dealer is responsible. If you buy directly from a foreign factory, enforcement can become harder. For items that have been used in accordance with their normal use for a building and have caused its defectiveness, claims for defects become time-barred under § 438 BGB after five years (German law). Details in the article Warranty and guarantee for windows.

Lead time: longer transport routes can lengthen the lead time, though well-organised factories often make up for it with high production capacity. Ask about the lead time from order confirmation and about the procedure for damaged individual parts.

Why Prices Differ

Windows from different countries are often offered at different prices. The reasons seldom lie in the material, because profiles, glass and hardware are traded internationally. Differences arise rather from:

  • Wage and location costs in production and administration
  • Size and automation of the factory: large series producers calculate differently from small joineries
  • Sales channel: whether sold through dealers, fitting firms or directly online
  • Scope of service: survey, fitting and on-site service are often included in regional quotes
  • Transport: longer routes cost more, but become cheaper per unit with large quantities

A low price is therefore no proof of poor quality, and a high price no proof of good. Always compare quotes on the basis of the same specification and the same services. The checklist further down shows how to do this step by step.

How to Assess a Quote Objectively

  1. Ask for the profile system: manufacturer and system designation must be available.
  2. Request the declaration of performance: do the declared values match your window type?
  3. U values for your size: not just the standard window, but your own items.
  4. Look at a corner sample or references if possible: from a corner sample you can see chambers, reinforcement and seals.
  5. Clarify the contracting partner: who is liable, who fits, who supplies spare parts?
  6. Transport and delivery: how are the windows packed and secured?

Common Prejudices and What Lies Behind Them

  • "Foreign windows are cheaply made." Quality depends on the factory and its quality management, not on the country.
  • "German windows last for ever." German windows also need maintenance, and fitting errors are the most common cause of damage, whatever the country of origin.
  • "The CE mark is a quality seal." CE marking confirms that the manufacturer has declared the performance. How good that performance is shows in the declared values.

Checklist

  • Profile system, glass and hardware named in writing
  • Declaration of performance and CE marking available
  • U values stated for each item
  • Contracting partner and jurisdiction clear
  • Spare-parts and complaints route clarified
  • Delivery and packaging described
  • Local fitting firm found for fitting and readjustment

AluKun has windows and doors made to measure at partner factories and states the profile system and technical values for every configuration in the configurator. That way you compare on the basis of facts rather than origin. An overview of the available systems is on the windows page.

Frequently asked questions

Are windows from Poland worse than German windows?

Not across the board. Factories in Poland can process the same profile systems, hardware and glass as German firms. What matters is the profile system, production quality, the declared performance and the service, not the country of origin.

Do windows from Turkey need CE marking?

Yes. Anyone placing windows on the EU single market needs a declaration of performance and CE marking for products within the scope of the harmonised standard EN 14351-1, regardless of where they were made.

Is customs duty payable on windows from Turkey?

For industrial goods a customs union between the EU and Turkey has abolished duties and quantitative restrictions. Turkey is not an EU member, though, so goods are imported and cleared through customs, and import VAT is payable.

How can I recognise good windows whatever their origin?

By a known profile system, a complete declaration of performance to EN 14351-1, U values that make sense for your size, branded hardware and a service you can reach for spare parts and complaints.

Sources

  1. Regierungspräsidium Tübingen: Fenster und Außentüren als harmonisierte Bauprodukte (19.12.2025)(opens in a new tab)
  2. DIBt: BauPVO 2024 seit 8. Januar 2026 anwendbar(opens in a new tab)
  3. Europäische Kommission: EU-Türkiye trade relations (Zollunion)(opens in a new tab)
  4. IHK Bodensee-Oberschwaben: Inverkehrbringen und Verwenden von Bauprodukten(opens in a new tab)
  5. § 438 BGB – Verjährung der Mängelansprüche(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Reverse Charge on Windows: VAT in EU Trade
Costs & buying guides

Reverse Charge on Windows: VAT in EU Trade

Reverse charge when buying windows in another EU country: when the buyer owes the VAT, how the EU supply works and what private customers need to know.

7 minutes read

Cover image: CE Marking for Windows: Declaration of Performance
Costs & buying guides

CE Marking for Windows: Declaration of Performance

CE marking and declaration of performance for windows: what EN 14351-1 requires, which values it contains and what the new regulation changes.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy