Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Costs & buying guides

CE Marking on Windows: What the Declaration of Performance and EN 14351-1 Mean for Buyers

7 minutes read

CE marking on windows is compulsory: windows and external doors fall under the harmonised product standard EN 14351-1, and anyone placing them on the EU single market must draw up a declaration of performance and affix the CE mark. For buyers, the declaration of performance is the really valuable document. It states the tested values for thermal insulation, airtightness and wind load, with which you can compare quotes and evidence requirements. This article describes the EU and German position; if you are buying in the UK, check which marking and approval rules apply there.

Here you can see what is in the declaration of performance, how to read it, what the new Construction Products Regulation changes and what to look for when buying.

The European Construction Products Regulation governs how manufacturers declare the performance of their construction products. For windows and external doors the relevant harmonised standard is EN 14351-1. The Tübingen regional authority (Regierungspräsidium), as the market surveillance authority in Baden-Württemberg, points out that CE marking has been mandatory for windows and external doors since 1 February 2009.

The principle:

  1. The manufacturer determines the performance of its product using the test and assessment procedures of the standard.
  2. It draws up a declaration of performance (DoP).
  3. It affixes CE marking.
  4. Dealers and importers check that marking and documents are present.

The manufacturer here is the window maker who produces the finished window, not the profile maker. For dealers and importers, the IHK Bodensee-Oberschwaben names as relevant obligations in particular correct product marking, availability of the necessary documents, traceability and passing on information along the supply chain.

What Is in the Declaration of Performance

The declaration of performance contains, among other things:

  • Unique identification code of the product type
  • Intended use (e.g. windows in residential and non-residential buildings)
  • Name and address of the manufacturer
  • Harmonised standard applied (EN 14351-1)
  • Declared performance for the essential characteristics

Market surveillance names as typical characteristics thermal insulation, air and driving-rain tightness, resistance to wind load, radiation properties of the glazing and safety requirements.

The Most Important Characteristics for Buyers

Characteristic Statement What it means for you
Thermal transmittance Uw in W/(m²K) Basis for the GEG and funding
Air permeability Class How tight the window is against draughts
Watertightness Class Important in exposed locations
Resistance to wind load Class Relevant for large windows and tall buildings
Load-bearing capacity of safety devices Threshold value e.g. for tilt limiters
Sound insulation Rw in dB Relevant on roads and under flight paths
Radiation properties g value, light transmission Summer heat protection, daylight

"NPD" (No Performance Determined) means that no performance has been declared for this characteristic. That is permitted but can mean that a value is missing for your project.

Why CE Is Not a Quality Seal

CE marking confirms that the manufacturer has declared the performance using the prescribed procedures. It does not say whether a window is "good". A window with Uw = 1.3 W/(m²K) can be CE marked just as much as one with 0.8 W/(m²K). What matters is whether the declared values suit your requirements:

  • GEG (German Buildings Energy Act): when replacing in existing residential buildings, the Uw value of external windows and window doors may be no more than 1.3 W/(m²K).
  • BEG funding: a Uw value of no more than 0.95 W/(m²K) is required (as at September 2026).
  • Sound insulation: on noisy roads, local requirements may demand certain sound insulation classes.

An overview of the U values is given in the article Uw, Ug, Uf: the U values of a window.

The New Construction Products Regulation (EU) 2024/3110

The new Construction Products Regulation entered into force on 7 January 2025 and has applied since 8 January 2026. The DIBt explains that the old and the new regulation initially apply in parallel to a large extent, namely for declaration of performance, CE marking and the activities of notified bodies. For products whose harmonised standards were drawn up under the old regulation, the previous requirements continue to apply. Only when new harmonised technical specifications are published in the Official Journal of the EU do the provisions of the new regulation become binding for these products (as at September 2026).

What changes in the long run:

  • Declaration of performance and conformity: replaces the current declaration of performance for products under new standards.
  • Environmental characteristics: new harmonised standards are to include essential environmental characteristics.
  • Digital product passport: according to the DIBt this becomes mandatory only after a delegated act by the Commission with a transition period.

According to the DIBt, the old regulation will be fully repealed only 15 years after the new one begins to apply. For window buyers little therefore changes in daily practice for the time being: you will continue to receive a declaration of performance to EN 14351-1.

CE Marking and National Requirements

CE marking governs placing on the market, that is, sale. What performance a window must have in a particular building is governed by national rules; in Germany, for example, the GEG, state building codes and technical building rules. The Austrian OIB likewise points out that member states can make the use of CE-marked products subject to national requirements. If you supply windows abroad or fit them there, you should check the relevant requirements; more on this in the article Ordering windows for delivery abroad.

What CE Marking Does Not Cover

The declaration of performance describes the window as a product, as it leaves the factory. It says nothing about how well it is fitted. A window with excellent tightness classes can still cause draughts and moisture damage if the joint to the masonry is not properly sealed. Fitting is subject to its own recognised rules, such as the principle "tighter inside than outside", with an airtight inner layer, a functional layer in the joint and a driving-rain-tight, vapour-open outer layer. Background is in the article RAL fitting: installing windows properly.

Questions such as ease of use, appearance, surface quality or service are also not governed by CE marking. Advice, samples and references remain important for these.

How to Check the Documents When Buying

  1. Request the declaration of performance; it must be provided, either on paper or electronically.
  2. Match the product type: does the identification code fit the window offered?
  3. Check the values: Uw for your size, tightness classes and, where relevant, sound insulation.
  4. Question NPD entries if a characteristic matters to you.
  5. Archive the documents, for funding, warranty and selling the house.

For windows from other EU countries or from Turkey, the same rules apply as soon as they are sold here. The country of origin changes nothing about these obligations.

Checklist

  • CE marking present on the product or in the accompanying documents
  • Declaration of performance to EN 14351-1 available and matching the product
  • Uw value meets the GEG and, where relevant, funding requirements
  • Air and driving-rain tightness suited to the location of the building
  • Documents filed together with the invoice and order confirmation
  • Fitting to the recognised rules of the art agreed

In the configurator you see the technical characteristics for every configuration. If you need the declaration of performance for a window you have ordered, you can reach us via the contact page.

Frequently asked questions

Is CE marking compulsory for windows?

Yes. Windows and external doors fall under the harmonised product standard EN 14351-1. Anyone placing them on the EU single market must draw up a declaration of performance and affix CE marking; for windows this has applied since 1 February 2009.

What is in the declaration of performance for a window?

It names the manufacturer, product type, intended use and the declared performance for the essential characteristics, such as thermal transmittance, air permeability, watertightness against driving rain and resistance to wind load.

Is CE a quality seal?

No. CE marking confirms that the manufacturer has declared the performance using the prescribed procedures. How good a window is can be seen from the declared values and whether they suit your project.

What does the new Construction Products Regulation 2024 change?

Regulation (EU) 2024/3110 has applied since 8 January 2026. For products whose harmonised standards were drawn up under the old regulation, the previous rules continue to apply for now; in the long run the declaration of performance and conformity is new (as at September 2026).

Sources

  1. Regierungspräsidium Tübingen: Fenster und Außentüren als harmonisierte Bauprodukte (19.12.2025)(opens in a new tab)
  2. DIBt: BauPVO 2024 seit 8. Januar 2026 anwendbar(opens in a new tab)
  3. DIBt: Marktüberwachung von Bauprodukten(opens in a new tab)
  4. IHK Lippe zu Detmold: Bauprodukteverordnungen (EU) Nr. 305/2011 und (EU) 2024/3110(opens in a new tab)
  5. IHK Bodensee-Oberschwaben: Inverkehrbringen und Verwenden von Bauprodukten(opens in a new tab)
  6. OIB: Bauprodukteverordnung und CE-Kennzeichnung(opens in a new tab)
  7. GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Window Warranty: Statutory Rights and Guarantees
Costs & buying guides

Window Warranty: Statutory Rights and Guarantees

Window warranty in Germany: two- and five-year periods, reversed burden of proof, removal and refitting costs and how a guarantee differs from the warranty.

8 minutes read

Cover image: Reverse Charge on Windows: VAT in EU Trade
Costs & buying guides

Reverse Charge on Windows: VAT in EU Trade

Reverse charge when buying windows in another EU country: when the buyer owes the VAT, how the EU supply works and what private customers need to know.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy