Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Anthracite RAL 7016 Outside, White Inside: How to Choose the Window Colour Properly

7 minutes read

Windows in anthracite outside and white inside have been the most popular two-tone finish for years: anthracite grey (RAL 7016) looks modern and timeless on the façade, while white keeps rooms bright and suits any décor. Technically, with uPVC windows you must watch the heat build-up of dark surfaces; with aluminium, anthracite is unproblematic. Expect a surcharge compared with all-white windows.

Why the combination is so in demand

  • Outside: anthracite forms a calm contrast to light rendered façades, suits dark roof tiles and makes window frames look slimmer, because the eye perceives dark surfaces less strongly.
  • Inside: white reflects light, looks neutral and fits any wall colour. Dark frames inside can feel oppressive in small rooms.
  • Freedom of design: if you redecorate inside later, the windows do not need to be changed.

Important: in new-build areas in Germany, development plans or design bylaws sometimes prescribe façade or window colours. Check this with your local authority before ordering. In the UK, check planning conditions and any conservation-area or listed-building rules.

Three technical routes to anthracite

1. Decorative foil on uPVC

On uPVC windows the shade is usually achieved with an exterior foil, from the RENOLIT EXOFOL collection, for example. The foil is laminated onto the white profile at the factory, and the profile remains white inside. There are smooth and lightly textured variants. Details on foil types and warranty in the article Renolit decorative foils.

2. Aluminium cover shell on uPVC

Many uPVC systems offer an aluminium shell for the exterior, such as the AluClip range from Kömmerling on the 76 and 88 mm platforms. The shell is powder-coated, and inside the uPVC remains white. Advantage: a genuine metal surface and less heating of the uPVC profile itself.

3. Powder-coated aluminium window

With aluminium windows, the outer and inner shells are coated separately. Anthracite outside and white inside is therefore no problem, in almost any RAL colour and various gloss levels. Heat build-up is structurally uncritical, because aluminium remains dimensionally stable.

Route Material outside Material inside Special feature
Decorative foil PVC with foil PVC white cheapest solution, mind heat build-up
Aluminium shell Aluminium PVC white genuine metal look, surcharge
Aluminium window Aluminium Aluminium white greatest colour freedom, dimensionally stable

The heat build-up issue

Dark surfaces absorb more solar energy than white ones and become noticeably hotter on the south side in summer. With PVC this is a construction issue, because the material becomes softer with heat and expands more.

Manufacturers respond to this:

  • Foils with Solar Shield pigments: for EXOFOL MX and PX, RENOLIT uses pigments that reflect infrared radiation and are meant to reduce heating of the profiles.
  • More reinforcement: system suppliers often prescribe more extensive steel or fibre reinforcement for foil-laminated windows.
  • Smaller maximum dimensions: for 88 proStratoTec with glass bonding, Kömmerling quotes sashes up to 1,000 × 2,500 mm in white and up to 1,000 × 2,350 mm in decor; without bonding 1,000 × 2,200 mm and 1,000 × 1,800 mm respectively.

Why this is so is described in the article Steel reinforcement in uPVC windows.

Effects on insulation and funding

The foil itself has no relevant influence on the Uf-value. Additional reinforcement can worsen it slightly, though, and an aluminium shell changes the profile geometry. If you apply for German funding (BEG individual measure: Uw ≤ 0.95 W/(m²K), as of September 2026), the Uw-value should be stated for the coloured version – not for the white standard window.

Matching details

A two-tone window looks coherent only if the accessories follow:

  • External window sill: aluminium in anthracite or in the colour of the façade.
  • Roller shutter or external venetian blind slats and guide rails: in anthracite or suitably matched.
  • Seals: black seals stand out less on the anthracite profile; inside on the white profile, grey seals look more discreet. With many systems the seal colour is uniform – ask.
  • Handles: inside usually white or stainless steel.
  • Front door: a matched shade, so that the façade gives a uniform picture.

Alternatives to anthracite

If you want a somewhat softer shade, there are alternatives: basalt grey (RAL 7012), slate grey (RAL 7015), quartz grey (RAL 7039) or black grey (RAL 7021). Wood decors such as Golden Oak or walnut outside with white inside are also common. An overview is given in the article External window colours.

Anthracite on roller shutters and external blinds

If roller shutters or external venetian blinds are renewed with the window, the shade should be consistent. Aluminium roller shutter slats are available in many RAL colours, as are guide rails and bottom rails. With surface-mounted roller shutters, the box is usually foiled or coated in the window colour. Make sure that anthracite variants from different manufacturers look coherent side by side – a foil in RAL 7016 and a powder coating in RAL 7016 can look slightly different depending on texture and gloss level.

White inside: which white?

Inside, the white base profile is usually visible. Profile white is not identical to pure white (RAL 9016) or wall white; it can look slightly warm or cool. With aluminium windows, RAL 9016 traffic white is usually chosen inside. If you want a particular white to match doors or furniture, ask for a sample.

Anthracite and summer heat protection

The dark frame colour hardly affects room temperature – the glass area is decisive for heat gain. If you want to avoid summer overheating, rely on solar-control glass or external sun protection, not on a lighter frame colour.

Care

  • Foil: with water and mild cleaner, no abrasives or solvents.
  • Powder coating: also clean mildly; do not polish matt surfaces.
  • Limescale and dust: dark surfaces show water marks and dust more quickly – regular wiping preserves the impression.

Frequent questions from consultations

Will anthracite still look modern in ten years? Anthracite grey has been established as a standard colour in new build for many years and is considered comparatively timeless. There is no guarantee for taste, though – if you are unsure, you can choose basalt grey or quartz grey for a somewhat softer shade.

Can I re-foil the inside later? Foiling after installation is possible but rarely reaches the quality of factory lamination. So make the choice of inside colour deliberately when ordering.

Does anthracite suit a timber roof or clinker brick? With dark clinker brick, anthracite can look very harsh; there, wood decors or brown-grey shades are often more harmonious. A colour sample against the façade gives clarity.

Cost

A two-tone window costs more than an all-white one. The surcharge arises from foiling or coating, any additional reinforcement and made-to-order fabrication. How high it is depends strongly on the system and window size – in the AluKun configurator you see the surcharge for your dimensions directly.

Checklist

  1. Check the development plan: are there colour requirements?
  2. Choose the technical route: foil, aluminium shell or aluminium window.
  3. Look at a colour sample, ideally against the façade in daylight.
  4. Have maximum dimensions checked for the coloured version.
  5. Coordinate accessories: window sill, roller shutter, seals, handles.
  6. Have Uw stated for the coloured version if you apply for funding.

You will find all window systems with colour options on the windows page.

Frequently asked questions

Why are windows in anthracite outside and white inside so popular?

Anthracite looks modern on the façade and suits many roof and render colours, while white inside stays bright and neutral and fits any décor. That way you get both: a striking façade and bright rooms.

Is RAL 7016 the same as anthracite grey?

RAL 7016 is called anthracite grey in the RAL colour system. On uPVC windows the shade is usually achieved with a decorative foil, which can differ slightly in texture and nuance from a powder coating.

Do anthracite uPVC windows heat up strongly?

Dark surfaces warm up more in the sun than white ones. Foil manufacturers therefore use infrared-reflecting pigments, and profile manufacturers often prescribe additional reinforcement or smaller maximum sizes.

Does a two-tone finish cost extra?

As a rule yes, because foil-laminated or coated profiles require an additional work step. How high the surcharge is depends on the system, the size and the specification.

Sources

  1. RENOLIT EXOFOL MX – Außenfolie mit Solar-Shield-Technologie(opens in a new tab)
  2. RENOLIT EXOFOL PX – The advanced exterior film(opens in a new tab)
  3. fensterblick – Solar Shield Technologie(opens in a new tab)
  4. Kömmerling 88 proStratoTec – Passivhausfenster zertifiziert nach PHI(opens in a new tab)
  5. Kömmerling – 76-mm-Systeme (AluClip-Varianten)(opens in a new tab)
  6. Schüco LivIng Viva – Datenblatt (PDF)(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Frame Uf-Value: How to Compare Profiles Properly
Window profiles

Frame Uf-Value: How to Compare Profiles Properly

Window frame Uf-value explained: how it is calculated, why the 'up to' figure matters, how Uf affects the Uw-value and how to compare profiles fairly.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy