Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Window Profiles for Period Homes: Heritage Protection, Slim Sightlines and the Right Contour

7 minutes read

The right profile for windows in a period home combines today's insulation and airtightness values with the slim, divided look of historic windows. For a listed building (Baudenkmal) in Germany, the heritage authority decides on material, division and profiling; the Building Energy Act then allows deviations under § 105 GEG. In unprotected older buildings you have more freedom – slim sightlines, a timber-window-like contour and the right division make the difference. This article is about German rules; if you are in the UK, check the listed-building and conservation-area rules that apply to you.

Heritage protection: who decides?

In Germany, heritage protection is a matter for the federal states. The heritage protection laws of the states regulate which changes to a listed building or in a heritage area require permission. As a rule these changes include replacing windows, because they strongly shape the appearance of a building.

The authority typically assesses:

  • Material: wood is often required; sometimes timber-aluminium, aluminium or uPVC with a corresponding look are accepted.
  • Division: number of sashes, transoms, fanlights.
  • Glazing bars: true divided or applied, width and profile.
  • Face widths and profiling: narrow frames, drip rails, putty bevel.
  • Colour and glass: frame colour and, where relevant, type of glass.

Clarify the requirements in writing with the heritage authority before every order. This article does not replace legal advice; what is decisive is your state's heritage protection law, local bylaws and the decision of the competent authority.

GEG and listed buildings: § 105

In principle, the requirements of the Building Energy Act (GEG) also apply to listed buildings – so a Uw-value of at most 1.3 W/(m²K) when replacing windows in a residential building (Annex 7, as of September 2026). § 105 GEG does allow deviations, however: where, for a listed building, specially protected fabric or other particularly worth-preserving building fabric, meeting the requirements would impair the fabric or appearance or other measures would involve disproportionately high effort, the requirements may be departed from.

In practice that means: the energy requirement does not automatically step back, but it can yield to heritage protection when the two are incompatible. Many heritage authorities today accept insulating glass in slim profiles, so good values are achievable even in listed buildings.

What makes a period-home profile

Slim face widths

Historic timber windows often have very slim frames. Modern profiles with high insulation values are wider. Profiles with reduced face widths close this gap. More in the article Slim face widths.

Timber-window-like contour

  • Flush sashes: frame and sash lie in one plane on the outside, as with many timber windows. REHAU offers a flush sash with Artevo.
  • Bevelled overlap: Kömmerling K-VISION has a characteristic 15° bevelled overlap in the frame, which recalls traditional timber windows. According to the manufacturer, Uf-values down to 1.0 W/(m²K) are possible.
  • Curved sash contours: for LivIng 82, Schüco offers the Rondo sash contour with softer curves.

Division and meeting stile

Many period windows are double-sash without a fixed central mullion – meeting-stile windows. This construction can be reproduced with modern profiles and preserves the typical character. Details in the article Meeting-stile windows.

Glazing bars

Glazing bars divide the glass area. True divided-light bars are the most authentic but technically elaborate; applied (Viennese) bars with a spacer in the cavity come close to the original visually; internal bars are simplest but look flat. More in the article Glazing bars in windows.

Material in an older home

Material Strengths in an older home To note
Timber authentic, often required by heritage authorities regular exterior care
Timber-aluminium wood inside, easy care outside exterior look not always heritage-appropriate
uPVC with wood decor inexpensive, easy care acceptance in listed buildings limited
Aluminium very slim, stable look must suit the building

In unprotected older buildings all materials are possible. What matters is that profile, division and colour suit the building.

Technical particularities in an older home

Reveal and rebate

Older buildings often have internal rebates, irregular reveals and little depth. That limits the frame depth of the new window. Profiles with 70 to 82 mm often fit. Frame extensions can compensate for dimensional differences – see Frame extensions and coupling profiles.

Moisture and ventilation

New, airtight windows change the humidity in the room. In older buildings with uninsulated external walls, that can lead to condensation and mould on cold wall surfaces. When replacing windows, a ventilation concept under DIN 1946-6 should therefore be checked; rebate ventilators may make sense.

Arches and special shapes

Round arches, segmental arches and angled windows are common in older buildings. Most profile systems can be made in special shapes; with uPVC, arches are produced by bending the profile, which requires minimum radii.

Energy improvement despite heritage protection

Even though deviations from the GEG are possible in a listed building, it is worth achieving as much on energy as the authority permits. Often proven routes:

  • Insulating glass in slim profiles: modern double or slim triple glazing in profiles with a historic contour.
  • Retaining box-type double windows: with historic box-type double windows, the inner window can be renewed and the outer one restored – that preserves the façade and improves insulation and sound protection.
  • Warm edge: spacers of plastic or stainless steel instead of aluminium reduce condensation at the glass edge.
  • Retrofitting seals: with retained timber windows, seals can be routed in.

Which solution can be approved is decided by the authority. Bring concrete proposals with section drawings – that speeds up the discussion.

Funding for listed buildings

For listed buildings and other particularly worth-preserving building fabric, German BEG funding has partly different minimum technical requirements. The details are set by the funding guideline in force; an energy efficiency expert for listed buildings can clarify the options for your building.

Colour

White is historically documented on many Wilhelminian-era and Art Nouveau houses, as are subdued greens, greys or browns. Wood decors such as walnut or dark oak suit clinker-brick and timber-framed houses. For listed buildings, the authority often determines the shade, occasionally after a paint-layer investigation.

Common mistakes when replacing windows in an older home

  • Profiles too wide: a standard profile with a wide face markedly changes the character of the façade and takes away light.
  • Internal bars instead of applied ones: they look flat from a distance and are often not accepted by heritage authorities.
  • Simplified division: replacing a formerly six-light window with a single-sash element changes the proportions of the façade.
  • Forgetting ventilation: airtight new windows in an older building with uninsulated walls increase the risk of mould if user behaviour is not adapted or ventilation is not provided technically.
  • Permission obtained too late or only verbally: anyone who orders without clearance from the heritage authority risks, at worst, removal at their own expense.

Checklist for period windows

  1. Clarify the protection status: listed building, heritage area, design bylaw?
  2. Obtain the requirements in writing: material, division, glazing bars, colour.
  3. Measure the reveal and decide the frame depth.
  4. Choose a profile with a suitable contour: slim, flush or with a bevelled overlap.
  5. Agree the type of glazing bars and the division.
  6. Check the ventilation concept to avoid moisture damage.
  7. Clarify the Uw-value – or, for a listed building, document the deviation under § 105 GEG.

In the AluKun configurator you can choose division, glazing bars and colours. For listed buildings, send us the authority's requirements through the contact form – we will check which system meets them.

Frequently asked questions

May I fit uPVC windows in a listed building?

In Germany, the competent heritage authority decides case by case. Timber windows are often required; sometimes uPVC or aluminium windows with a suitable look are permitted. Clarify this in writing before ordering. In the UK, check with your local planning authority.

Does the Building Energy Act also apply to listed buildings?

In principle yes, but § 105 GEG allows deviations if the requirements would impair the fabric or appearance, or if other measures would involve disproportionately high effort. This is German law; elsewhere, check the local rules.

Which profile looks most coherent in an older home?

Profiles with slim sightlines and a contour like a timber window, such as flush sashes or frames with a bevelled overlap. Glazing bars, a suitable division and subdued colours add to the effect.

Do I need permission for new windows in an older home?

For a simple window replacement in an unprotected building in Germany, usually not. For listed buildings, in heritage areas or under design bylaws, permission may be required. State law and local bylaws are decisive.

Sources

  1. GEG § 105 – Baudenkmäler und sonstige besonders erhaltenswerte Bausubstanz(opens in a new tab)
  2. GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
  3. Kömmerling K-VISION – Produktseite(opens in a new tab)
  4. REHAU – Premium-Fenstersystem ARTEVO(opens in a new tab)
  5. Schüco – LivIng 82 (Verarbeiter-Produktseite)(opens in a new tab)
  6. Internorm – Holz-Alu-Fenster(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Anthracite Outside, White Inside: Choosing Windows
Window profiles

Anthracite Outside, White Inside: Choosing Windows

Windows in anthracite outside, white inside: look, engineering, heat build-up, surcharge and care – plus foil vs aluminium shell vs powder coating.

7 minutes read

Cover image: Slim Window Profiles: More Light, Cleaner Look
Window profiles

Slim Window Profiles: More Light, Cleaner Look

Slim window profiles explained: what face width is, how much light it brings, which systems offer slim frames and where the limits lie.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy