BAFA funding for windows in Germany 2026: requirements, rates and process after the BEG reform
7 minutes read
BAFA funding for windows in 2026 consists of a grant of 15% of eligible costs, provided the new windows achieve a Uw value of no more than 0.95 W/(m²K) and an energy efficiency expert is involved. Since the BEG reform of 21 July 2026, the iSFP bonus is only worthwhile for larger projects: the additional 5 percentage points apply only to the portion of costs above 30,000 euros (status: September 2026). This scheme applies to existing residential buildings in Germany; readers in the UK or elsewhere should check their own national or local grant schemes.
What matters is the sequence: application before the project starts, contract only with a funding condition, execution, then proof of use. If you swap these steps, you lose the entitlement.
BAFA funding for windows 2026: what is funded
The scheme funds the replacement of windows, balcony and patio doors and roof windows in existing residential buildings under the Federal Funding for Efficient Buildings, Individual Measures (BEG EM), building envelope area. The responsible body is the Federal Office for Economic Affairs and Export Control (BAFA). Eligible are materials and installation as well as necessary ancillary work, such as connections, window sills or making-good plastering.
The main framework conditions according to BAFA (status: September 2026):
- The building permit application or notification of the building must date back at least five years.
- The eligible expenditure must be at least 300 euros gross.
- An energy efficiency expert (EEE) from the expert list is mandatory.
- The application must be submitted before the measure begins.
Technical minimum requirements for the windows
What counts is the annex "Technical Minimum Requirements" (TMA) to the BEG EM guideline in the version of 17.07.2026:
| Component | Maximum U-value |
|---|---|
| Windows, balcony and patio doors | Uw ≤ 0.95 W/(m²K) |
| Roof windows | Uw ≤ 1.0 W/(m²K) |
| Low-threshold or burglar-resistant windows | Uw ≤ 1.1 W/(m²K) |
| Upgrading windows and box windows | U ≤ 1.3 W/(m²K) |
| Windows on listed buildings / building fabric worth preserving | Uw ≤ 1.4 W/(m²K) |
| External doors of heated rooms | UD ≤ 1.3 W/(m²K) |
In addition, the BEG requires thermal-bridge-reduced and airtight execution as well as proof of adequate moisture protection. In practice that means professional installation on the principle "tighter inside than outside" and, if the building envelope becomes much tighter, a check of the ventilation need. Read more in the article on the ventilation concept when replacing windows.
You will generally only reach a Uw of 0.95 with triple glazing and a well-insulated frame. Why that is so is explained in our article Triple glazing: is it worth it?.
Funding rates and maximum limits after the reform
With the guideline of 17.07.2026, it is mainly the iSFP bonus that has changed. The basic funding rate stays at 15%.
| Dwelling | Eligible costs without iSFP | with iSFP |
|---|---|---|
| 1st dwelling | up to €30,000 | up to €60,000 |
| 2nd to 6th dwelling | €15,000 each | €30,000 each |
| 7th dwelling onwards | €8,000 each | €15,000 each |
How the new iSFP bonus works (status: September 2026): the 15% applies to the entire eligible costs up to the maximum limit. The additional 5 percentage points apply only to the part above the standard maximum limit, for a detached house that is above 30,000 euros.
A worked example for a detached house:
- Window replacement with 22,000 euros of eligible costs: 15% = 3,300 euros grant. The iSFP no longer brings a bonus here.
- Windows plus facade insulation with 42,500 euros: 15% of 42,500 euros = 6,375 euros, plus 5% of 12,500 euros = 625 euros, together 7,000 euros.
- For the first dwelling, with iSFP a maximum of 15% of 60,000 euros plus 5% of 30,000 euros is possible, so 10,500 euros.
For plain window replacement in a detached house, the renovation roadmap therefore usually no longer matters for the amount of the grant. When it is still worthwhile is covered in the article on the iSFP bonus for windows.
Example: multi-family house
For a house with three dwellings, the limits add up: 30,000 euros for the first and 15,000 euros each for the second and third dwelling, together 60,000 euros of eligible costs without iSFP. If a landlord replaces all the windows there for 54,000 euros, the grant is 15%, i.e. 8,100 euros. With iSFP the limit rises to 120,000 euros, but the bonus applies only to costs above 60,000 euros. Unlike the tax bonus under section 35c, BAFA funding is also open to landlords, an important reason why it is often the only funding route for multi-family houses.
BAFA grant or tax bonus?
For owner-occupied houses there is an alternative: under section 35c of the German Income Tax Act (EStG), you can deduct 20% of the costs from income tax over three years, with no prior application and no obligation to use an energy adviser. Now that the BAFA basic funding rate for smaller projects is effectively 15%, the tax route works out better for many owners. BAFA remains interesting if you let the property, pay little income tax or prefer the grant as a lump sum. Using both routes for the same windows is not permitted. You will find the detailed comparison in the article on the tax bonus under section 35c EStG.
The process step by step
BAFA describes the procedure in seven steps. This is what it looks like for window replacement:
- Obtain quotations. Non-binding quotations and advice do not count as the start of the project. Clarify with the supplier that the windows offered meet the Uw value of the TMA.
- Commission the energy efficiency expert. They check the measure and prepare the technical project description (TPB). The TPB ID is valid for two months.
- Conclude a contract with a funding condition. At the time of application, a supply or service contract must be in place that is subject to a rescinding or suspensive condition tied to the funding approval and states the expected execution period.
- Submit the application online. In the BAFA funding portal, with the TPB ID, before work begins.
- Carry out the work. Anyone who starts after applying but before the grant notice does so at their own risk, according to BAFA.
- Have the technical project confirmation (TPN) prepared. After completion, the expert confirms the implementation; the TPN ID is also valid for two months.
- Submit proof of use. No later than six months after the end of the approval period, with invoices and proof of payment. If you miss the deadline, you lose the payout.
Transitional rule for projects already planned
According to BAFA, projects already applied for and approved are not affected by the change. TPBs created up to 08.07.2026 could still be applied for on the old terms until 20.07.2026. For all applications from 21.07.2026, the new rules apply.
Typical mistakes that cost the grant
- An unconditional order before the application. A signed contract without a funding condition counts as the start of the project.
- Wrong product data. The Uw value must be demonstrated for the size and glazing actually ordered, not just for a test standard size.
- Installation without connection planning. The TMA require thermal-bridge-reduced, airtight execution. Make sure installation follows the RAL installation guideline.
- Double funding. For the same measure you cannot also use the tax relief under section 35c EStG. Which route suits better depends on the individual case.
- Missing deadlines. The TPB ID, TPN ID and proof of use have fixed deadlines.
Checklist for your funded window replacement
- Approach the energy efficiency expert early and plan the date for the TPB
- Request a quotation with Uw ≤ 0.95 W/(m²K) per window and details of installation
- Sign a contract with a rescinding or suspensive funding condition
- Submit the application, wait for the notice, then order and have the windows installed
- Collect invoices, payment receipts and product data sheets
- Submit the TPN and proof of use on time
Funding guidelines can change at short notice; the current BAFA documents are always what counts. This article does not replace legal or funding advice.
When planning your windows, you can put together profile, glazing and dimensions in the window configurator and use the quotation as a basis for your energy adviser. Our team will answer questions about Uw values of individual items or about product data sheets for the proof of use via the contact page.
Frequently asked questions
How high is the BAFA funding for new windows in 2026?
The basic funding rate for building envelope measures is 15% of eligible costs. Since 21 July 2026, the iSFP bonus of 5 percentage points applies only to the portion of costs above 30,000 euros for the first dwelling (status: September 2026).
What U-value must funded windows have?
Under the technical minimum requirements of the BEG EM, windows and balcony and patio doors need a Uw of no more than 0.95 W/(m²K), roof windows 1.0 W/(m²K). For burglar-resistant or low-threshold windows, 1.1 W/(m²K) applies.
May I commission the window fabricator before the application?
Yes, but only with a supply or service contract that contains a rescinding or suspensive condition tied to the funding approval. An unconditional contract before the application counts as the start of the project and rules out funding.
Do I need an energy adviser for BAFA funding?
Yes. For individual building envelope measures, an energy efficiency expert from the federal expert list is mandatory. They prepare the technical project description (TPB), whose ID you state in the application.
Sources
- BAFA – Gebäudehülle (BEG EM): Fördersätze und Höchstgrenzen(opens in a new tab)
- BAFA – Informationen für Antragstellende(opens in a new tab)
- BAFA – Kurzmeldung zu den BEG-Anpassungen zum 21. Juli 2026(opens in a new tab)
- Förderfähige U-Werte nach BEG EM TMA (Fassung 17.07.2026)(opens in a new tab)
- iwpro – BEG-Reform 2026: Alle Änderungen im Überblick(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.