Front Door Cost: What a New Front Door Costs, from Entry-Level to Designer Door
7 minutes read
According to current market overviews, front door costs range from around 900 euros for a simple uPVC door with fitting to 6,500 euros and more for an aluminium designer door without fitting. For complete projects Aroundhome gives a range of about 1,500 to 8,000 euros. What sum you should allow depends on material, panel, security specification, sidelights and the effort of fitting. Because a front door is used every day for many years, it is worth looking at costs over its whole service life, including maintenance, energy loss and security, and not just the purchase price. All prices here are in euros and come from the German market; prices elsewhere will differ.
Below you will find the current price ranges, the most important cost drivers and a step-by-step budget plan.
Front Door Cost 2026 by Material
Two current sources (as at August 2026) give the following ranges. Note that Aroundhome shows the door without fitting, whereas MyHammer shows the total cost with fitting:
| Material | Aroundhome (door) | MyHammer (incl. fitting) |
|---|---|---|
| uPVC | approx. €1,300–3,500 | approx. €900–2,700 |
| Aluminium | approx. €2,000–6,500 | approx. €1,300–4,700 |
| Timber | approx. €2,500–6,000 | approx. €1,000–3,700 |
| Timber-aluminium | approx. €3,000–7,000 | – |
The differences show that the two sources assume different levels of specification. MyHammer reflects simple to medium specifications, while Aroundhome extends to high-quality designer doors. The basic order is clear, though: uPVC is the cheapest entry point, and aluminium and timber-aluminium are above it.
The Three Price Classes at a Glance
Entry-Level Door
uPVC profile, inset panel with a glass cut-out or ornament, standard colour, multipoint locking with cylinder. Suitable for side entrances, rental properties or small budgets. For cellar access or garage entrances there are separate, cheaper side-entrance doors, which can also be made burglar resistant.
Mid-Range
uPVC with an aluminium outer shell or a simple aluminium door, panel with better insulation, colour outside, RC2 security hardware, stainless-steel pull handle. Many detached-house projects fall here.
Designer Door
Aluminium with a leaf-covering panel, where the leaf frame is not visible from outside, a large-format pull handle, integrated LED, fingerprint or app access, sidelights and fanlight. What leaf-covering means is explained in the article Front door panels.
The Most Important Cost Drivers
Panel: the panel often makes the biggest difference. Overlay, leaf-covering panels with glass or stainless-steel applications are markedly dearer than standard inset panels.
Sidelights and fanlight: for sidelights without fitting, Aroundhome gives about 800 to 2,000 euros. They also increase the effort of fitting.
Security: RC2 is included in the base price of many front doors. For doors with RC3, Aroundhome gives prices from about 2,500 to 4,000 euros. The resistance classes under DIN EN 1627 differ in which burglar's tools and what length of attack the tested door withstands; the differences are explained in the article Security front door. Important: the class applies only to the complete unit of door, hardware, glass and correct fitting.
Access systems: motor locks, fingerprint, code keypad or smart lock cost extra and sometimes need a power connection in the door frame.
Colour and finish: standard colours such as anthracite are usually inexpensive; special colours and textured paints cost a surcharge.
Thermal insulation: thicker panels and thermally optimised profiles improve the Ud value, which matters for funding.
Dimensions: extra-wide and extra-tall doors need stronger profiles and hinges.
Fitting and Ancillary Costs
| Item | Aroundhome | MyHammer |
|---|---|---|
| Fitting new door | €300–700 | €300–1,200 |
| Removing old door | – | €50–200 |
| Removal and disposal | €100–400 | Disposal €50–100 |
Additional costs arise if
- the floor has to be adjusted or the threshold lowered,
- plaster and reveal have to be renewed after removal,
- a power connection for a motor lock or lighting is missing,
- a canopy or letterbox unit is planned at the same time.
Funding for the Front Door
In Germany a new front door can be funded through the BAFA's BEG individual measures. The conditions are a door heat transfer coefficient of no more than 1.3 W/(m²K), the involvement of an energy efficiency expert and an application made before the contract is signed. The basic funding rate is 15 per cent (as at September 2026). For comparison, the German Buildings Energy Act (GEG) requires, when new external doors are installed in existing buildings, only a U value of no more than 1.8 W/(m²K). Details are in the article Funding for the front door.
Alternatively the tax bonus under § 35c EStG is possible if a specialist company fits the door. Readers outside Germany should check which schemes apply in their own country.
When a Dearer Front Door Is Worthwhile
A front door is opened many times a day and is directly exposed to wind, rain and sun. Extra spending makes particular sense in these situations:
- Weather side or dark colour: strong sunshine on a dark door creates temperature differences between inside and outside. Stable profiles and a suitable climate class reduce the risk of warping. Background is explained in the article Warping of front doors.
- Detached house in a quiet location: higher burglar resistance is more worthwhile here than in a busy block of flats with an entry phone.
- Accessibility: a low threshold, a motor lock or a door opener cost more but make everyday life easier for good.
- Energy-efficient refurbishment: if you are refurbishing windows and façade anyway, a well-insulated door meets the funding requirements and avoids a weak point in the building envelope.
Conversely, a designer door with every extra is not automatically the better door. A solid mid-range door with RC2, good insulation and clean fitting meets the requirements of most detached houses.
Keep an Eye on Follow-On Costs
The purchase is only part of the bill. Also think about:
- Maintenance: hinges and locking should be checked regularly and adjusted where needed.
- Electronics: fingerprint readers, motor locks and batteries have a limited life.
- Cylinders and keys: security cylinders with a security card cost more to reorder than standard cylinders.
- Surface care: aluminium and uPVC are easy to care for; timber needs regular repainting.
Typical Mistakes When Buying a Front Door
- Asking for the Ud value only for a standard size, not for your own door with sidelight
- Not checking opening direction and hand (DIN left/right)
- Forgetting power for a motor lock or lighting
- Not matching threshold height to the floor covering
- Applying for funding only after placing the order
- Not coordinating lead time with other trades such as plastering or flooring
- Not obtaining a quote for disposal of the old door
Plan Your Budget in Five Steps
- Take measurements: width and height of the opening, sidelights, fanlight.
- Set priorities: security, insulation, design; which matters most to you?
- Establish the base price: put together the door with panel, colour and hardware in the configurator.
- Allow for fitting and ancillary work: fitting, removal, disposal, plaster, electrics.
- Check funding: compare the Ud value of the chosen door with the funding requirements and apply before the contract is signed.
Also allow a small contingency: when old doors are removed, damaged reveals or an uneven threshold often come to light.
Checklist for Front Door Quotes
- Material, profile system and frame depth
- Panel: inset or leaf-covering, glass share, safety glass
- Ud value of the complete door for the specific size
- Locking, cylinder, RC class
- Handle inside and outside, hinges
- Sidelights, fanlight, letterbox
- Fitting, removal, disposal, connection work
- Lead time and guarantee terms
Put together your preferred door in the configurator and compare panels, colours and specifications directly with the price. An overview of models and materials is on the front doors page.
Frequently asked questions
What does a uPVC front door cost with fitting?
Current sources give about 900 to 2,700 euros including fitting (MyHammer), or about 1,300 to 3,500 euros for the door alone (Aroundhome), for uPVC front doors. Specification, panel and security shift the price markedly.
What does an aluminium front door cost?
For aluminium front doors Aroundhome gives about 2,000 to 6,500 euros, MyHammer about 1,300 to 4,700 euros including fitting. Leaf-covering panels, sidelights and smart-lock systems are at the upper end.
What does it cost to fit a front door?
Aroundhome gives 300 to 700 euros for fitting; MyHammer 300 to 1,200 euros plus 50 to 200 euros for removing the old door. Disposal is sometimes charged separately on top.
Is a new front door eligible for funding?
Yes, in Germany through the BEG individual measures, if the door achieves a Ud value of no more than 1.3 W/(m²K) and meets the other conditions. The basic funding rate is 15 per cent (as at September 2026).
Sources
- Aroundhome: Neue Haustür – Kosten mit Einbau 2026 (aktualisiert 14.08.2026)(opens in a new tab)
- MyHammer Preisradar: Haustür einbauen (Stand 21.08.2026)(opens in a new tab)
- Sofort-Förderung: Förderung für Fenster und Türen 2026(opens in a new tab)
- GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
- BAFA: Förderung Gebäudehülle(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.