Roller Shutter Cost When Retrofitting: Price Factors from Type to Drive
7 minutes read
According to Aroundhome, the cost of retrofitting a surface-mounted roller shutter to a standard window is about 250 to 650 euros including fitting. Electric versions cost more because a motor and power connection are added; solar roller shutters save the electrical installation but are dearer as a product. If you want to equip many or large windows, compare type, drive and fitting effort carefully. All prices here are in euros and come from the German market; prices elsewhere will differ.
This article shows what the individual cost blocks amount to according to current sources and what to look for in a quote.
Retrofitting Roller Shutters: Which Types Are Possible?
When retrofitting to existing windows the choice is limited:
| Type | Can it be retrofitted? | Typical use |
|---|---|---|
| Surface-mounted roller shutter | Yes, with no work on the window | Retrofit on the façade or in the reveal |
| Top-mounted roller shutter | Usually only when replacing windows | Box sits on the new window frame |
| Built-in roller shutter | No | Box in the masonry, planned in new builds |
Aroundhome and Gira reach the same conclusion: for pure retrofitting, the surface-mounted roller shutter is in most cases the practical solution. The differences between the types are explained in the article Roller shutter types compared. Existing old roller shutter boxes can often be modernised with a new curtain and motor, which is also a form of retrofitting.
Roller Shutter Cost: Market Prices
Product Price
The price of the roller shutter itself depends on size, slat material (uPVC or aluminium), box size and drive. For surface-mounted roller shutters, Aroundhome gives entry prices from about 100 euros (uPVC, manual) to about 140 euros (aluminium, electric) and, in a further overview, 50 to 250 euros per window. Gira also gives about 100 euros as an entry price and about 500 euros for an electric roller shutter on a large window.
Fitting
For fitting, Aroundhome gives:
- manual (strap or crank): about 200 euros per window
- electric: about 300 to 400 euros per window
Total Cost per Window
| Type | Total including fitting (Aroundhome) |
|---|---|
| Surface-mounted roller shutter, retrofitted | approx. €250–650 |
| Roller shutter with fitting, general | approx. €265–630 |
| Electric roller shutter | approx. €320–630 |
| Patio door 240 × 200 cm, aluminium, motorised | approx. €750–1,000 |
Solar Roller Shutters
Solar roller shutters have a small photovoltaic panel on the box and a battery. For solar-powered surface-mounted roller shutters, Clever Bauen gives entry prices from about 299 euros for small boxes and from about 499 euros for standard windows; for a detached house with five windows, about 2,500 to 4,000 euros including fitting is given. The advantage: no electrician is needed.
The Price Factors in Detail
Window Size and Box Size
The taller the window, the more curtain the box has to hold. Large windows need larger boxes, which are more noticeable on the façade and cost more.
Slat Material
uPVC slats are cheap and light but suitable only for smaller widths. Foam-filled aluminium slats are more stable, insulate better and are more robust against being pushed up.
Drive
| Drive | Advantages | Cost factor |
|---|---|---|
| Strap | simple, cheap | strap feed-through as a thermal bridge |
| Crank | no strap feed-through | somewhat dearer, operation more laborious |
| Electric motor (cabled) | comfortable, can be automated | motor plus electrical installation |
| Radio motor | smart-home capable | dearer motors and transmitters |
| Solar | no power cable | dearer product, battery life |
More on the drive options is in the article Retrofitting a roller shutter motor.
Fitting Situation
Simple fitting on the façade on the ground floor is cheap. It becomes dearer for fitting in the reveal, on insulated façades (special fixings), on upper floors with a ladder or scaffolding, or where cables have to be routed through the wall.
Additional Specification
- Anti-lift locks as burglary protection
- Insect screen in the guide rails
- Obstacle detection and timer
- Integration into a smart-home hub
Worked Example: Detached House with Eight Windows
An example based on the Aroundhome ranges: eight windows are to receive electric surface-mounted roller shutters. At 320 to 630 euros per window, this gives a range of about 2,560 to 5,040 euros. With manual strap roller shutters the budget would be lower; with solar drive it would tend to the upper end, though the electrical installation is dropped. Often not included in such ranges are:
- Electrical work beyond the plain connection (new cables, flush-mounted switches)
- Scaffolding for the upper floor
- Smart-home hub and set-up
- Adjustments to window boards
If you are replacing windows anyway, plan the roller shutter at the same time: when windows are replaced, top-mounted roller shutters are possible, which integrate into the façade. Which variant makes sense when is shown in the article Top-mounted roller shutters when replacing windows.
What Matters When Fitting to the Façade
Many price differences between quotes arise in fitting. Look out for these details:
- Guide rails: they must be exactly plumb, otherwise the curtain runs stiffly and wears faster.
- Fixing to insulated façades: with external wall insulation, an ordinary plug is not enough. Mounting elements are needed that carry loads into the load-bearing masonry without creating thermal bridges.
- Cable routing: with electric roller shutters, the cable is led through the wall or the window frame. The penetration must be sealed airtight.
- Box position: a surface-mounted box in the reveal reduces the glass area and so the incoming light, but is less conspicuous. On the façade the full glass height is retained.
- Distance to the window sill: the bottom bar of the curtain must sit cleanly on the outside window board so that no gap remains.
Ask in the quote how the firm deals with these points. Cheap fitting can cause draughts, condensation at the cable feed-through or rattling curtains.
Is the Investment Worthwhile?
Roller shutters bring several benefits at once: sun protection in summer, an additional cushion of air in front of the window in winter, privacy and, with anti-lift locks, an obstacle for burglars. How large the energy-saving effect is in an individual case depends strongly on the window, orientation and use; there are no reliable flat-rate figures. The gain in comfort in bedrooms and in rooms with large south- or west-facing windows is undisputed. If you have to choose between roller shutters and external venetian blinds, you will find a comparison in the article External venetian blinds or roller shutters.
Tax Bonus and Funding
Roller shutters that improve thermal insulation can in some circumstances count as an energy-saving measure. For the tax bonus under § 35c EStG in Germany the following applies: 20 per cent of the costs over three years, maximum 40,000 euros per property, building more than ten years old, work carried out by a specialist company and payment to its account (as at September 2026). Whether your specific roller shutter measure falls under it should be clarified in advance with the contractor or a tax adviser. If you fit it yourself, you cannot use the bonus. Keep the invoice and the specialist contractor's certificate for your tax return. Readers outside Germany should check which schemes apply in their own country.
Checklist for Roller Shutter Quotes
- Type (surface-mounted, top-mounted) and fitting location (façade, reveal) clearly stated
- Slat material and box size for each window
- Drive and control, including electrical work
- Fitting, scaffolding and travel as separate items
- Additional specification such as anti-lift locks and insect screen
- Approach on insulated façades: fixing without a thermal bridge
- Instruction in operation and programming of the control after fitting
You will find suitable systems for retrofit and new build on the roller shutters page. In the configurator you can combine roller shutters directly with your made-to-measure windows.
Frequently asked questions
What does a retrofitted surface-mounted roller shutter cost per window?
Aroundhome gives 50 to 250 euros for a surface-mounted roller shutter plus 200 to 400 euros for fitting, together about 250 to 650 euros per window. Other sources give similar ranges for complete roller shutters with fitting.
How much more does an electric roller shutter cost?
The motor itself makes the product dearer, and fitting costs rise because a power connection is needed. For electric roller shutters including fitting, Aroundhome gives about 320 to 630 euros per window.
Can a top-mounted roller shutter be retrofitted?
As a rule only together with a window replacement, because the box sits directly on the window frame. For retrofitting alone, a surface-mounted roller shutter is usually the right choice.
Does a solar roller shutter need an electrician?
No. Solar roller shutters have a battery and their own solar panel and need no power connection. For the tax bonus under § 35c EStG in Germany, however, fitting by a specialist company is a condition.
Sources
- Aroundhome: Rollladen außen nachrüsten – Varianten und Preise (16.03.2025)(opens in a new tab)
- Aroundhome: Rollladen Kosten mit Montage (21.08.2025)(opens in a new tab)
- Clever Bauen: Solar-Rollläden nachrüsten – Kosten 2026 (14.06.2026)(opens in a new tab)
- Gira G-Pulse: Rollladen nachrüsten im Altbau(opens in a new tab)
- Finanzamt NRW: Steuerermäßigung § 35c EStG(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.