Anthracite Window Surcharge: Why Coloured Windows Cost More Than White Ones
6 minutes read
The anthracite window surcharge arises because a white uPVC profile has to be coated with a decorative foil in an extra operation, and dark frames often need stronger reinforcement because they heat up more. Current guides put the extra cost of standard foils such as anthracite at about 8 to 15 per cent, and depending on the supplier and extent of foiling at 10 to 30 per cent. How much it comes to for you depends on whether one or both sides are to be coloured. The figures come from the German market; prices elsewhere will differ.
Here you can see what makes up the surcharge, what alternatives there are and how to choose colour wisely.
Anthracite Window Surcharge: What Current Sources Say
| Source | Statement |
|---|---|
| Oknoplast (2026) | Standard foils such as anthracite or basalt grey: 8–15% surcharge; matt premium foils with an aluminium look: 10–20% |
| FensterHero (05/2026) | Anthracite: 10–30% of the base price; for uPVC windows about €50–150 per window, for aluminium €100–250 |
| Deutsche Fensterbau | foil on one side 5–22%, on both sides up to 30% above the white version |
The third source dates from 2021 and is used here only to put the relationship between one-sided and two-sided foiling in context. The more recent sources confirm the order of magnitude. What counts for your project is the specific price of your configuration.
What Makes Up the Surcharge
1. Foiling as an Additional Operation
uPVC profiles are normally extruded in white. For a coloured surface, a decorative foil is laminated onto the visible faces with a special adhesive under heat and pressure. This requires dedicated equipment, extra material, time and careful quality control of the edges. Depending on the profile geometry, several faces are foiled individually.
2. One Side or Both
If you choose anthracite outside and white inside, you pay for one side only. If both sides are foiled, for example with all-dark windows or a wood-effect finish inside, the foil effort nearly doubles. That explains the wide ranges in the sources.
3. Reinforcement for Dark Colours
Dark surfaces heat up markedly more in the sun than white ones. The Deutsche Fensterbau guide gives surface temperatures of over 70 °C for anthracite frames and around 40 °C for white. The greater thermal expansion can distort profiles. Manufacturers therefore often prescribe reinforced steel stiffening for dark colours. More on this in the article Steel reinforcement in uPVC windows.
4. Coloured Seals and Accessories
Dark seals, coloured cover caps, handles and window board connection profiles go with anthracite frames. These components are not always included in the standard price.
5. Longer Lead Time
Foiled profiles are not always in stock. One online supplier, for example, gives the same lead time for uPVC windows in standard colours as for white, but several weeks longer for special colours. That is not a direct surcharge, but it can affect the building schedule, for example if plasterers or screeders have to wait for the windows.
Anthracite on Aluminium Windows and Front Doors
With aluminium the situation is different: profiles are powder coated or anodised anyway. Standard RAL colours are therefore often available with no or only a small surcharge. Extra costs arise with
- two-colour finishes (different colours inside and outside),
- special colours outside the standard palette,
- textured paints, fine texture or metallic effects,
- wood-effect coatings.
A comparison of the finishing processes is in the article External window colours: RAL shades, foils and powder coating.
Colour Options and Their Cost Tendency
| Option | Cost tendency | Note |
|---|---|---|
| White inside and outside | Base | Standard, shortest lead time |
| Anthracite outside, white inside | medium surcharge | most common choice in refurbishment and new build |
| Anthracite on both sides | higher surcharge | looks very modern inside, increases contrast |
| Wood effect outside, white inside | medium surcharge | classic look, popular in period properties |
| Wood effect on both sides | higher surcharge | homely effect inside |
| Aluminium in standard RAL | low to none | special colours dearer |
Worked Example: What the Surcharge Means for a Project
Suppose a house gets ten uPVC windows, and the white version costs on average 600 euros per window without fitting. With the Oknoplast ranges (8 to 15 per cent), an anthracite outside adds about 48 to 90 euros per window, so roughly 480 to 900 euros for the whole house. The FensterHero figure (50 to 150 euros per uPVC window) is of the same order. If you choose anthracite on both sides, the extra can be markedly higher.
In relation to the whole project with fitting, window boards and reveal work, the colour surcharge is therefore usually a manageable item. It should be a conscious decision, but seldom a reason to give up the look you want.
Care and Durability of Coloured Windows
Foiled surfaces are smooth and can be cleaned with water and a mild cleaner. Avoid abrasive cleaners, solvents and hard sponges, because they can damage the foil. Scratches are harder to repair on foil than on white uPVC, whose material is coloured all the way through. With dark colours, dust and pollen show more, while white frames tend to show soot or abrasion more. If you clean your windows regularly, you will hardly notice a difference in everyday life.
Is the Surcharge Justified?
From a technical point of view, a good foil offers more than looks: it is UV resistant, easy to care for and protects the profile surface. Quality foils from well-known manufacturers are designed for long service lives. What matters is that the window maker follows the processing instructions, in particular on reinforcement for dark colours.
From a design point of view, colour changes the whole façade. Anthracite looks modern, makes profiles appear slimmer and goes with white or grey render, with brick and with timber cladding. In a listed or conservation setting, on the other hand, there may be requirements on colour. Help with the decision is given in the article Anthracite outside, white inside.
How to Keep the Colour Surcharge in Check
- Foil only the outside: white inside is bright, timeless and cheapest.
- Choose standard colours: anthracite RAL 7016 or basalt grey are among the most common foils and are often cheaper than exotic shades.
- One colour scheme for all elements: windows, balcony door, front door and roller shutters in the same colour avoid special orders.
- Consider aluminium for large areas: with aluminium, dark colours are less critical because of the material.
- Think about roller shutter boxes and window boards: matching colours for accessories save reordering later.
- Decide early: if you want to change the colour after ordering, then with made-to-measure items you may in the worst case pay for a whole new window.
Colour Choice Checklist
- Specify colour outside and inside separately
- With dark uPVC windows, ask about reinforcement
- Clarify matching colour for seals, handles, window board connection and roller shutter
- Ask about the lead time for the colour you want
- Check requirements from the local plan or heritage protection
- Compare the surcharge in euros for each item, not just in per cent
- Look at a sample piece or colour chart before you order
In the configurator you choose inside and outside colour separately and see the price difference immediately for each window. An overview of available profiles and finishes is on the windows page.
Frequently asked questions
How big is the surcharge for anthracite uPVC windows?
Current sources give about 8 to 15 per cent over white for standard foils such as anthracite; other sources give 10 to 30 per cent depending on scope. Foil on one side is cheaper than on both.
Is anthracite outside and white inside cheaper?
As a rule yes, because only the outside is foiled. It is also the most common combination, since it gives the façade a modern look while the inside stays bright.
Why do dark uPVC windows need reinforcement?
Dark surfaces heat up markedly more in the sun than white ones. The greater thermal expansion can distort profiles; suitable steel reinforcement counters this.
Does colour cost extra on aluminium windows too?
Aluminium is coated anyway, so standard RAL colours are often available in the base price or for a small surcharge. Special colours, textured finishes or two different colours inside and outside cost more.
Sources
- Oknoplast: Fenster austauschen Kosten 2026 (Farbaufpreise)(opens in a new tab)
- FensterHero: Fenster anthrazit – Vorteile, Kosten und Pflege (geändert 22.05.2026)(opens in a new tab)
- Deutsche Fensterbau: Was kosten farbige Fenster?(opens in a new tab)
- Fensterversand: Lieferzeit für Fenster und Türen(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.