Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Front doors

Front Door Handles: Pull Handle, Lever and Bar Handle Compared

6 minutes read

On front doors, a pull handle outside and a lever handle inside is the standard: from outside the door can be opened only with a key or access system, from inside with the lever. Bar handles, which are let into the door leaf or fitted flush, are the modern alternative and can be combined with fingerprint readers. For security, what matters is the security escutcheon around the cylinder.

The Basic Rule: Fixed Handle Outside, Lever Inside

A front door is meant to latch shut and then stay locked from outside. That is why it is fitted with a handle set with a fixed outside handle (a "Wechselgarnitur" in German):

  • Outside: a fixed handle (pull handle, bar handle or knob). It is used for pulling and pushing but does not move the latch.
  • Inside: a movable lever with which you retract the latch and open the door.

A lever on both sides is unusual on front doors, because anyone could then open the door from outside once it had merely been pulled shut. Exceptions are doors with day release in surgeries or offices, where the lock technology governs when the door is free.

Front Door Pull Handle: Shapes and Lengths

The pull handle is the most common handle shape on modern front doors. Variants:

Handle shape Effect Notes
Round bar handle timeless, easy to grip wide choice of lengths
Square-section handle architectural, modern edges should be rounded
Curved or offset handle classic to elegant suits country-house and period doors
Handle with wood or leather sleeve warm feel note care of the insert
Handle with integrated fingerprint reader convenience and technology in one only with a suitable door and power supply

Length is a matter of design and comfort. Short handles look discreet; long handles running over a large part of the door height emphasise the vertical and are reachable by tall and small users alike. Which lengths suit a door model depends on the motif, glazed cut-outs and fixing points, and is set by the manufacturer.

Fixing

Pull handles are bolted through the door leaf or fixed to mounting plates. With insulated infills, the fixing points must be reinforced. Fitting a different, longer handle afterwards is therefore often not straightforward, so choose the handle shape deliberately when buying.

Bar Handles: Flush and Modern

Bar handles are profiles let into the door leaf or fitted on the outside that run over a large part of the door height. They suit leaf-covering infills with a smooth surface particularly well; see front door infills: leaf-covering or inset.

Advantages:

  • very calm, architectural appearance,
  • no protruding parts to catch on,
  • ideal for integrating fingerprint readers and LED lighting.

Points to note:

  • Grip recesses must be deep enough for the door to be pulled easily even with gloves on.
  • Dirt collects in grip recesses, so clean them regularly.
  • A bar handle is firmly tied to the door model and can hardly be changed afterwards.

Manufacturers of access systems such as ekey offer fingerprint readers that are built directly into the bar handle or door leaf. More in the article on smart locks and fingerprint readers on the front door.

Inside Lever: Ergonomics in Daily Use

The lever on the inside is used often every day. Look at:

  • Shape: under DIN 18040-2, curved or U-shaped levers are easy to operate, even with limited hand strength. That is a gain in comfort in any household.
  • Height: for accessible doors, a handle height of 85 cm is specified. Details in the article on accessible front doors.
  • Rosette or long plate: the inside plate should match the outside handle visually.

Security: Escutcheon and Cylinder

The handle itself is not a security element, but the fitting around the cylinder is. The German police crime-prevention service recommends:

  • Security escutcheons to DIN 18257 in classes ES 1 to ES 3. They are bolted from the inside and protect the cylinder against twisting off, snapping and pulling. Simple security rosettes do not achieve the same resistance.
  • Cylinder cover: many security escutcheons have a cover that encloses the cylinder except for the keyway.
  • Flush cylinder: the profile cylinder should finish flush with the escutcheon on the outside, with a tolerance of about plus or minus 3 mm.

On a burglar-resistant door with a resistance class, the security escutcheon is part of the tested specification. Swapping it for any other can jeopardise the certification. More in the article on security front doors with RC2 and RC3.

Material and Care

  • Stainless steel is the classic for front door handles: robust, corrosion-resistant and timeless. Near the coast or where de-icing salt is a problem, a higher-alloy stainless steel grade is advisable.
  • Aluminium, powder-coated: to match the door colour, for example black or anthracite.
  • Brass and bronze tones: for classic and period doors.

Clean handles regularly with a mild cleaner and a soft cloth. Stainless steel can be refreshed with a special care product. Scouring agents and steel wool scratch the surface and, on stainless steel, can cause flash rust from foreign iron.

Matching Handle and Design

  • Proportion: large, wide doors can take long handles, while narrow doors look more balanced with short ones.
  • Lines: handle, glass strip and pilasters should relate to one another.
  • Colour: black handles on light doors set accents, while stainless steel on anthracite looks classic-modern.
  • Consistency: letterbox flap, bell and house number in the same material look calm.

Knob, Shell Handle and Special Shapes

Besides the pull handle and bar handle there are other outside handles:

  • Knob: the classic fixed knob is found mainly on period and country-house doors. It is compact but harder to grip with wet hands or gloves.
  • Shell or recessed handle: let into the infill, very flat, often on designer doors. It is less comfortable for pulling.
  • Handles with lighting: LED bar handles or illuminated recesses make it easier to find the lock in the dark.
  • Pull handle combined with bell or reader: some systems integrate a bell push or fingerprint reader directly into the handle.

Which Handle Suits Which Use?

For families with children, long pull handles are practical because everyone can grip at their own height. For older residents, a round cross-section that is easy to wrap the hand around counts. Anyone who often comes home with full hands benefits from a door with automatic locking and motorised unlocking, where a light push against the handle is enough.

Always plan the choice of handle together with lock, escutcheon and access technology, not only at the end of the configuration.

One more point is the weather side: handles made of dark-coated metal can heat up considerably in strong sun. On exposed south-facing elevations, light surfaces, stainless steel or handles with a wood or plastic sleeve are more pleasant.

Front Door Handle Checklist

  • Handle set: fixed handle outside, lever inside
  • Handle shape and length suited to motif and users
  • With a fingerprint reader: plan the integrated bar handle from the start
  • Security escutcheon to DIN 18257 with cylinder cover
  • Cylinder flush on the outside
  • Material suited to location and upkeep

You choose handle variants together with model and colour in the configurator. An overview of all models is given under front doors.

Frequently asked questions

Why does a front door usually have no lever handle on the outside?

A front door should be openable from outside only with a key or access system. That is why a fixed pull handle or knob sits on the outside and a lever on the inside that retracts the latch. This combination is called a handle set with a fixed outside handle (Wechselgarnitur).

How long should a pull handle on a front door be?

Length is mainly a question of proportion and users. Longer handles can be gripped at different heights by children and adults. The manufacturer specifies which lengths suit each model.

Is a security escutcheon necessary on a front door?

The police recommend security escutcheons to DIN 18257 (classes ES 1 to ES 3) because they protect the cylinder against snapping and pulling. Simple rosettes do not offer the same resistance.

Can a fingerprint reader be built into the handle?

Yes. Some access systems are designed for integration into bar handles or the door leaf. This has to be planned when ordering the door, because cable routes and motor lock must be prepared.

Sources

  1. Polizeiliche Kriminalprävention – Haus- und Wohnungstür sicher machen(opens in a new tab)
  2. nullbarriere.de – DIN 18040-2 Türen (Griffhöhe, Drückerformen)(opens in a new tab)
  3. ekey – Fingerprint-Zutrittslösungen (Integration in Griffleiste und Türblatt)(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Front Door Glass: Privacy, Patterned and Safety
Front doors

Front Door Glass: Privacy, Patterned and Safety

Choosing front door glass: satin finish, patterned, sandblasted designs, triple glazing and safety glass to DIN EN 356, with tips on light and insulation.

7 minutes read

Cover image: Warped Front Door: Climate Classes and Distortion
Front doors

Warped Front Door: Climate Classes and Distortion

Front door warped? Why front doors distort in winter and summer, what DIN EN 12219 and climate classes allow, and when distortion counts as a defect.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy