Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Front doors

Smart Lock and Fingerprint Reader on a Front Door: Built-In or Retrofit?

7 minutes read

A front door with a fingerprint reader opens with your fingerprint instead of a key: a reader checks the finger, and a protected control unit inside the house releases a motor lock or an electric door opener. On new front doors the reader is usually built straight into the door leaf or bar handle, while existing doors can be retrofitted with a smart lock and keypad. Burglar resistance is unaffected, since it still depends on the door, the locking and the fitting.

Front Door Fingerprint Lock: How the System Works

A fingerprint access system has three parts:

  1. Reader (outside): captures the fingerprint. It sits in the bar handle, the door leaf, the sidelight or beside the door.
  2. Control unit (inside): compares the print with the stored patterns and, if it matches, issues a switching command. It should sit in the protected area so that tampering from outside cannot open the door.
  3. Actuator: unlocks the door: a motor lock, an electric door opener or, with retrofit solutions, a motor that turns the key in the cylinder.

Well-known providers such as ekey offer different designs: readers for door manufacturers to build into the door leaf or bar handle, retrofit solutions powered by battery or mains, and flush-mounted readers beside the door that fit common switch ranges. Profile manufacturers such as Schüco also offer keyless access solutions with fingerprint readers for their front doors.

Built-In, Retrofitted or Beside the Door?

Version Mounting location Power supply Suitable for
Built-in reader with motor lock bar handle or door leaf mains via cable transfer new front door
Smart lock with keypad lock on the inside of the cylinder, keypad outside battery or rechargeable existing door, rented home
Reader beside the door wall, sidelight or post mains new build, conversion, gate systems

Built-In Solution in a New Front Door

If you are buying a new front door anyway, order the access system with it. The reader then sits neatly in the bar handle, and the cables run concealed through a cable transfer from the frame into the leaf. Combined with motorised multipoint locking, the door locks automatically when pulled shut and opens fully by fingerprint. Converting a door afterwards is involved, because leaf and frame have to be prepared for cables and the motor lock.

Retrofit with a Smart Lock

Smart locks such as the Nuki models are fitted on the inside over the existing key or cylinder and turn it by motor. For fingerprint access there is a separate keypad with fingerprint reader, which is fixed outside beside the door. According to the manufacturer, the keypad opens by fingerprint or code, and one variant also by NFC. The advantage: no intervention in the door, fully reversible, also suitable for tenants, provided the landlord and any master-key system allow it. A prerequisite is a cylinder with emergency and hazard function, so that a key left in the lock on the inside does not block locking from outside.

Motor Lock and Automatic Locking

The heart of a convenient keyless front door is a motor lock:

  • Automatically locking multipoint lock: when the door is pulled shut, the bolts extend mechanically. The door is thus always locked, not just latched.
  • Motorised unlocking: a motor retracts bolts and latch when the fingerprint, an app or a button gives the command.
  • Day release: in surgeries or at family parties, the door can be opened temporarily just by pushing it.

More on bolt types and resistance classes is explained in the article on security front doors with RC2 and RC3.

Security: What to Look For

A fingerprint reader makes a door neither more nor less secure; it is simply a different means of operation. Even so, there are points you should bear in mind:

  • Control unit inside: the evaluation must not take place in the outside reader, otherwise an offender could open the door by tampering with the reader.
  • Tested combination: if your door has a resistance class to DIN EN 1627, the motor lock used must be part of the tested specification.
  • Still protect the cylinder: even with keyless access, a profile cylinder usually remains for emergency opening. According to the police it should finish flush with the security escutcheon.
  • Encrypted wireless connection: with app and wireless solutions, look for current firmware and encrypted communication.
  • User management: limit fingerprints for tradespeople or babysitters to a set time and delete them afterwards.

Data Protection in a Private Setting

Fingerprints are biometric data. With the usual systems the features are stored locally in the control unit and not saved as an image. Inform housemates whose fingers you enrol, and in rented or commercial settings clarify the data protection requirements separately.

Power Supply and Emergency Opening

Before you decide, clarify the emergency arrangements:

  • Mains-powered systems: need a power connection at the frame. In a power cut the door stays locked and can usually be opened with the key.
  • Battery-powered systems: warn in good time of a low battery. Even so, keep a key somewhere safe.
  • Dirt and cold: readers may recognise wet or very cold fingers less well. Enrol several fingers per person and keep a second way of opening (code, app, key) available.

Alternatives to the Fingerprint Reader

A fingerprint reader is not the best choice for every household. Depending on use, other access media suit better:

Access medium Strengths Weaknesses
Fingerprint nothing to carry, not transferable recognition harder with wet or injured fingers
Keypad code easy to pass on to guests code can be spied on, change regularly
Transponder or card robust, cheap to reorder can be lost, then must be blocked
Smartphone app remote release, log depends on battery and connection

Many systems combine several media. For families with children or older relatives, a mix of fingerprint and code often makes sense; anyone who frequently lets tradespeople or care services into the house benefits from time-limited codes or app releases.

Planning When You Buy the Front Door

If you are planning a new door with a fingerprint reader, settle the following points early:

  1. Reader position: bar handle, door leaf or sidelight? The height should be comfortably reachable for all users.
  2. Lock type: automatically locking, motor-released, matched to the resistance class you want.
  3. Power routing: clarify the cable transfer in the frame and the cable route to the sub-distribution board before fitting.
  4. Smart home integration: should the door be linked to an entry phone, alarm system or app?
  5. Accessibility: combined with a swing door operator the door can also open automatically; see accessible front doors.

Rented Flats and Blocks of Flats

In rented properties and owners' associations, the front door usually belongs to the common property or to the landlord. Any intervention in the door or frame therefore needs consent. Reversible smart locks on your own flat door are easier to implement but should also be agreed, especially with master-key systems.

Checklist: Fingerprint Reader and Smart Lock

  • Built-in solution for a new purchase, retrofit for an existing door
  • Control unit on the inside
  • Motor lock part of the tested RC specification
  • Emergency opening by key arranged
  • Power supply and cable route planned
  • User rights can be time-limited

For many of the front doors in the shop, access options can be selected directly in the configurator. How to choose a handle with an integrated reader is shown in the article on front door handles: pull handle, lever and bar handle. An overall overview of all the buying criteria is given in buying a front door.

Frequently asked questions

Is a front door with a fingerprint reader secure?

The fingerprint reader only replaces the key as the means of operation. How well the door resists burglars depends on its resistance class, locking and fitting. It is important that the control unit sits protected on the inside.

Can I retrofit a fingerprint reader to my existing front door?

Yes. There are retrofit solutions that fit on the inside of the cylinder and are operated via a keypad with fingerprint reader, as well as readers for mounting beside the door. Building the reader into the door leaf itself usually makes sense only with new doors.

What happens in a power cut?

That depends on the system. Motor locks can usually still be opened with the key, and battery-powered retrofit solutions warn you of a low battery. When buying, ask specifically about the emergency opening arrangements.

Do I need an electrician for a fingerprint reader in the front door?

For systems built into the door with a motor lock, a mains connection via a cable transfer is needed, which should be connected by a qualified electrician. Battery-powered retrofit solutions need no cable.

Sources

  1. ekey – Fingerprint-Zutrittslösungen(opens in a new tab)
  2. Nuki – Smart Lock und Keypad(opens in a new tab)
  3. Schüco – Haustüren (Zutrittskontrolle, Sicherheit)(opens in a new tab)
  4. Polizeiliche Kriminalprävention – Haus- und Wohnungstür sicher machen(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Security Front Door RC2: Classes and Locking
Front doors

Security Front Door RC2: Classes and Locking

Security front door RC2 or RC3? What the resistance classes to DIN EN 1627 test, which locking is worthwhile and what to look for when you buy.

7 minutes read

Cover image: Front Door with Sidelight and Fanlight: Planning
Front doors

Front Door with Sidelight and Fanlight: Planning

Planning a front door with sidelight or fanlight: options, sizes, glass, letterbox and bell in the sidelight, structure and insulation, with a checklist.

7 minutes read

Cover image: Front Door U-Value: Requirements and Guide Values
Front doors

Front Door U-Value: Requirements and Guide Values

What U-value does a front door need? The German legal maximum, the 1.3 W/(m²K) funding level, typical values and what affects the U_D value (2026).

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy