Insect Screens for Windows: Frame, Roller or Pleated, Which System Fits?
6 minutes read
There are three main systems for insect screens on windows: the frame screen, which sits fixed in the window opening, the roller screen, which can be pulled down when needed, and the pleated screen, which is folded together sideways like a concertina. For tilt-and-turn windows, the frame screen is usually the simplest and sturdiest solution. Roller and pleated screens are worthwhile if the protection should not always be in front of the window or there is little space outside.
The three systems compared
| System | How it works | Strengths | Limits |
|---|---|---|---|
| Frame screen | fixed frame with mesh, hooked on from outside | sturdy, inexpensive, usually no drilling | stays in front of the window permanently, remove in winter |
| Roller screen | mesh in a cassette, pulled down in guide rails | invisible when not in use | fitted in the reveal, cassette needs space |
| Pleated screen | pleated mesh, slides sideways | very compact, for doors and wide openings | better for doors, higher price |
| Hinged frame/sliding unit | door with mesh | for balcony and patio doors | more on doors in the article Insect screens for sliding doors |
Insect screens for windows with a frame screen
The frame screen is a lightweight aluminium frame with stretched mesh. It is hooked onto the window frame from outside. The manufacturer Neher describes fitting with angle brackets, mostly without drilling and without damage to the window; window and roller shutter remain fully functional. For window cleaning or in winter, the frame can simply be removed.
Frame screens suit:
- tilt-and-turn windows in living rooms and bedrooms,
- basement windows and bathroom windows,
- rented flats where drilling is not wanted.
Look for a continuous brush-seal strip so that no gaps remain between the frame screen and the window frame.
Roller insect screens
The roller screen sits in a cassette at the top of the reveal or in front of the window, and the mesh runs in side guide rails. When needed, it is pulled down and hooked in at the bottom. Advantage: in autumn and winter it is rolled up out of sight, so there is nothing to remove and store. Disadvantage: the cassette needs space, and with external roller shutters, shutter rails and screen rails compete for the reveal. Many roller shutter manufacturers therefore offer integrated insect-screen rollers in the shutter box, which is the most elegant solution when buying new.
Pleated insect screens
The pleated screen folds sideways and is therefore particularly space-saving. It is used mainly for balcony and patio doors but can also make sense in front of wide windows or floor-to-ceiling elements. Bottom tracks are often very low, so there is hardly a trip edge.
Mesh: more than just a fly screen
The mesh decides transparency, air flow and durability:
- Standard fibreglass mesh: sturdy and inexpensive, the usual basis.
- Mesh with better see-through: Manufacturers offer finer, dark meshes that are hardly visible and let more air through. For its Transpatec mesh, Neher states 140 per cent higher air flow.
- Pollen-protection mesh: For allergy sufferers there are meshes with a coated, denser structure. For Polltec, Neher quotes an effectiveness of up to 99 per cent depending on wind speed and pollen size; a lighter variant lets more light and air through and holds back up to 90 per cent.
- Pet-resistant mesh: more tear-resistant for households with cats or dogs.
As a rule: the denser the mesh, the less air gets through. In bedrooms with pollen protection, it is therefore worth ventilating a little longer. Mesh colour also affects transparency: dark, anthracite meshes are usually less noticeable from inside than light ones because they reflect less light.
Which system for which room?
| Room | Recommendation |
|---|---|
| Bedroom | frame screen with well-permeable mesh; pollen protection for allergy sufferers |
| Kitchen | frame or roller screen, easy to clean |
| Bathroom | frame screen; with frosted glass the look hardly matters |
| Living room with patio door | pleated screen or sliding unit at the door, frame screens at windows |
| Children's room | sturdy frame screen with tear-resistant mesh |
Measuring correctly
Measuring errors are the most common reason why insect screens do not fit. Note:
- Frame screens: What is measured is the outer dimension of the window sash or the frame overlap on which the brackets are hooked. Measure width and height at several points and check whether handles, window cill or shutter rails get in the way.
- Roller and pleated screens: What is measured is the clear reveal. The reveal must be square and even, otherwise gaps result.
- Allow for the roller shutter: With external and top-mounted shutters, check whether enough room remains between curtain and window.
The basics of measuring windows are explained in the article Measuring windows correctly.
Planning when replacing windows
If you are ordering new windows, think about the insect screen at the same time:
- Frame colour: Order the insect screen to match the external colour of the window. More on colour choice in the article External window colours.
- Roller shutter with integrated insect screen: With a top-mounted shutter, the insect roller can sit in the same box.
- Juliet balcony: External frame screens can collide with the railing; an internally fitted pleated screen is then often simpler. See Juliet balcony at the window.
- Window cill connection: With roller and pleated screens, the bottom track must sit cleanly on the window cill.
Special cases
Roof windows: For roof windows there are special insect rollers fitted in the reveal. Conventional frame screens usually do not fit because of the installation situation. Roof-window manufacturers offer matching accessories.
Light wells: Basement windows are often in light wells through which leaves, spiders or mice get in. Mesh light-well covers keep them out and still let light and air through.
Tilt windows and fanlights: A fixed frame screen is often enough here, as the window is rarely opened fully.
Old buildings with box sash windows: Because of the two sash levels, fitting is more complicated. Made-to-measure frames for the inner or outer level are usually the best solution here.
Rented flats: Frame screens without drilling are the simplest choice here, because they can be removed without a trace when you move out. For roller and pleated screens in the reveal, you should get the landlord's consent beforehand.
Fit it yourself or have it fitted?
Frame screens and many roller screens are designed for DIY fitting and come with instructions. An exact measurement is decisive. Pleated screens for large doors, or solutions with an integrated shutter box, should be fitted by a specialist firm because guide rails must be aligned exactly.
Care
- Clean the mesh with a soft brush or a vacuum cleaner with a brush attachment, and wipe with lukewarm water if necessary.
- Clean the guide rails of roller and pleated screens regularly.
- Remove frame screens in winter and store them dry; this extends the life of the mesh.
Checklist
- Determine the window type and opening method.
- Choose the system: frame screen for standard windows, roller or pleated screen where space is short or invisibility is wanted.
- Choose the mesh type to suit see-through, pollen or pets.
- Measure carefully, allowing for roller shutter and window cill.
- Match the colour to the window frame.
If you are planning new windows and roller shutters, the insect screen can be planned in directly. In the configurator you choose windows and accessories, and on our page for roller shutters you will find systems into which an insect screen can be integrated.
Frequently asked questions
Which insect screen is best for windows?
For tilt-and-turn windows, the frame screen is the most common solution: sturdy, durable and usually fitted without drilling. Roller and pleated screens make sense if the protection should be pushed aside at times or there is little space.
Can I fit a frame insect screen without drilling?
With many systems, yes. The manufacturer Neher describes fixing its frame screens mostly without drilling by means of angle brackets, with no damage to the window. A suitable frame overlap is a precondition.
Does the roller shutter still work with an insect screen?
With correctly chosen frame screens, yes; Neher states that window and roller shutter remain fully functional. With external shutters and top-mounted boxes, the space between window and curtain should be checked beforehand.
Is there an insect screen that also keeps out pollen?
Yes. Special pollen-protection mesh holds back a large share of pollen; one manufacturer quotes up to 99 per cent depending on wind speed and pollen size. It usually lets less air through than standard mesh, however.
Sources
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.