Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Shutters, security & installation

Measuring windows correctly: masonry opening, check reveal and tolerances step by step

7 minutes read

When measuring a window, you first determine the masonry opening (width at three points, height at three points, taking the smallest dimension each time) and deduct the installation joint all round. With an opening that has a check reveal, the window is set behind the masonry projection and must be correspondingly wider than the visible opening. At the bottom a sill connecting profile is usually added, at the top possibly a roller shutter box. The result is the outer frame size that you order.

Made-to-measure work forgives little: a window that is too large will not fit into the opening, and one that is too small leaves a joint that can no longer be sealed properly.

The key terms

Term Meaning
Masonry opening (clear dimension) distance between the reveals, or from the sill to the lintel
Outer frame size outer dimension of the window frame, the order size
Installation joint gap between frame and masonry for fixing and sealing
Check reveal (rebate) masonry projection behind or in front of which the window is set
Plain reveal (butt installation) opening with no check reveal, with a smooth continuous reveal
Sill connecting profile profile under the frame to which the window sill is connected

In quotations and configurators, always make sure which of these dimensions is meant.

Step 1: determine the installation situation

Before you measure, clarify how the opening is built:

  • Plain reveal (no check reveal): the reveal is straight from inside to outside. Typical of many new builds and of houses with an external wall insulation system.
  • Installation with an inner check reveal: the opening is narrower on the inside than on the outside. The window is set from inside against the check. Typical in north German brick construction.
  • Installation with an outer check reveal: the opening is narrower on the outside. The window sits behind the check. Common in older houses in southern and western Germany.

Whether a check reveal exists is often visible only when you measure inside and outside and compare the dimensions. With old windows, a look at the frame helps: if it disappears behind masonry on the outside, there is a check reveal.

Step 2: measure the masonry opening

Measure with a sturdy folding rule or laser, preferably with two people:

  • Width: top, middle and bottom, each from reveal to reveal
  • Height: left, middle and right, each from the parapet or sill seating to the lintel
  • Diagonals: from corner to corner. If they differ markedly, the opening is out of square.

Note all values in millimetres. The smallest dimension counts each time, so that the window fits everywhere. Enter the values directly in a sketch of the opening and number the windows so that there is no mix-up with several openings.

When replacing windows, you measure only once the plaster and old connections are exposed far enough for the actual masonry opening to be visible, or you allow a safety margin and, if in doubt, have a specialist firm measure up.

Step 3: deduct the joint

From the smallest dimension you deduct the installation joint, on both sides. The right joint width depends on:

  • the frame material, because uPVC and aluminium profiles expand to different degrees with temperature change,
  • the size of the window, because longer profiles expand more in absolute terms,
  • the sealing system: compressible tapes work only within the joint-width range stated by the manufacturer.

The joint is therefore not a flat value. Settle it with the installer or follow the specifications of the chosen sealing system. Joints that are too narrow cannot be insulated and sealed, ones that are too wide overstretch the tapes.

Worked example (plain reveal): smallest measured width 1,250 mm, planned joint per side 12 mm: frame width = 1,250 − 2 × 12 = 1,226 mm. The height is calculated accordingly, but at the bottom allowing for the sill connecting profile.

Step 4: allow for the check reveal

With an opening with a check reveal, you additionally measure the clear dimension between the checks and the depth of the check. The window must overlap the check on each side so that the joint behind it can be sealed. Frame width = dimension between the checks + twice the overlap. How much overlap is needed depends on the profile and the sealing system. If in doubt, have the dimension for check-reveal situations confirmed by a specialist firm.

Step 5: add at the bottom and top

Bottom: most windows get a sill connecting profile onto which the external window sill is pushed. Its height is deducted from the height dimension or stated separately; clarify whether the order size is meant with or without the profile. More in the article on sill connecting profiles.

Top: if a frame-mounted roller shutter is to be supplied with it, the height of the opening is divided between window and box. The box height depends on the system and the window height. Details in the article on frame-mounted roller shutters when replacing windows.

Sides: frame extensions can compensate for dimensional differences, for example if an existing opening does not suit the desired window size.

Special cases when measuring

  • Balcony and patio doors: besides width and height, the connection to the floor is decisive. Measure the height from the finished floor inside and from the surface outside, and clarify whether a threshold or a level transition is wanted. Usual sizes are explained in the article on balcony door sizes.
  • Multi-part elements: for windows with mullions or meeting stiles, the overall dimensions are measured; you fix the division in the configurator.
  • Older building with a round or segmental arch: templates or a survey by a specialist firm make sense here.
  • Facade insulation planned: if the facade is insulated later, this affects installation position and connections. Coordinate the measurements with the insulation planning so that no thermal bridge arises.
  • Internal window sill: if a new internal window sill is fitted, allow for its thickness and projection in the height.

Putting tolerances in realistic terms

Masonry openings have building tolerances, and windows too are built with small manufacturing tolerances. The installation joint compensates for both. Precisely for that reason it must be neither too tight nor too generous: it is a compensating zone, fixing space and sealing area all at once.

Common mistakes when measuring

  • Measured only once: masonry openings are seldom square.
  • Measured the old window instead of the opening: the old frame says little about the actual opening.
  • Forgot the joint: the window then does not fit in.
  • Overlooked the check reveal: the window is too narrow and does not cover the check.
  • Sill profile counted twice or forgotten
  • Opening direction not fixed: left- or right-hand hung (DIN left or DIN right in German practice), hinge side

Checklist for your measurements

  • Determine the installation situation: plain, inner check reveal, outer check reveal
  • Measure width and height three times each, note the smallest dimension
  • Measure the diagonals
  • Fix the joint width with the installer or the sealing system
  • Allow for the sill connecting profile and roller shutter box
  • Fix the opening type and hinge side
  • Make a sketch with dimensions and photos
  • Check the dimensions a second time before ordering

With your dimensions you can put windows together directly in the configurator. If you are unsure whether you have calculated the outer frame size correctly, our team will gladly check your sketch via the contact page.

Frequently asked questions

Which dimension do I order for a window?

As a rule you order the outer frame size, that is, the width and height of the window frame. It results from the measured masonry opening minus the installation joint all round and, where applicable, plus a check reveal or a sill connecting profile.

How much joint do I deduct for a window?

The joint width depends on the frame material, window size and the chosen sealing system, for example the working range of the compressible tape. Clarify it with the installer or according to the sealing system's specifications before you fix the order size.

What is a window with a check reveal?

With a masonry opening with a check reveal, the opening is narrower on the outside or inside because of a projection in the masonry than behind it. The window is set behind this check, and must therefore be wider than the visible opening.

At how many points should I measure?

Width at the top, middle and bottom; height on the left, middle and right. The smallest dimension counts in each case. Also measure the diagonals to detect out-of-square openings.

Sources

  1. ift Rosenheim – Update Montageleitfaden Fenster und Außentüren(opens in a new tab)
  2. clean-invoice Wissen – RAL-Montage Fenster: Fugenbreite und Kompribänder(opens in a new tab)
  3. dbfenster – Innen dichter als außen: Die drei Ebenen der Anschlussfuge(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Fitting Windows Yourself: Possibilities and Limits
Shutters, security & installation

Fitting Windows Yourself: Possibilities and Limits

Fitting windows yourself: what skilled DIYers can manage, where the limits are, what applies to funding, tax bonus and warranty, with working steps.

7 minutes read

Cover image: Adjusting and Maintaining Windows: Hardware, Seals
Shutters, security & installation

Adjusting and Maintaining Windows: Hardware, Seals

Adjusting and maintaining windows: set contact pressure, correct dropped sashes, lubricate hardware and care for seals, with a yearly maintenance plan.

7 minutes read

Cover image: Window Installation Sealing: Three-Layer Principle
Shutters, security & installation

Window Installation Sealing: Three-Layer Principle

Window installation sealing: why the joint must be tighter inside than outside, which materials belong in the three layers and which mistakes cause damage.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy