Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Lift-and-slide doors

Lift-and-slide doors (HST): how the construction, mechanism and benefits fit together

6 minutes read

A lift-and-slide door (HST, from the German Hebe-Schiebe-Tür) is a large patio or balcony door whose sash first lifts and then slides sideways on rollers. Because the seals do not touch the frame while the sash is moving, even very heavy sashes glide easily, and when the door is closed its own weight presses the seals tight. That makes the HST the first choice when wide glazed fronts, a low threshold and good insulation values all need to come together.

How a lift-and-slide door works

The principle is simple and has been proven for decades. In the closed position the sash is lowered onto the frame and the seals around its perimeter are compressed. Turn the handle through 180 degrees and a gearbox raises the sash by a few millimetres. The seals release, and the sash now stands on carriages that roll along a track in the threshold.

  • Closed: sash lowered, seals compressed, locking engaged.
  • Open: sash raised, sliding sideways without seal friction.
  • Intermediate position: if the handle is turned down again, the sash lowers and stays where you left it.

The key difference from a simple sliding door is that nothing scrapes. That is exactly what the classic definition of a lift-and-slide door describes: the sash is lifted out of its sealed closed position, seal and all, and only then moved sideways.

Construction: frame, sash, threshold and hardware

An HST consists of just a few main components, but they have to work together precisely.

Frame and threshold

The outer frame is considerably deeper than on a window because it holds two levels: one for the sliding sash and one for the fixed panel or a second sliding sash. The lower threshold carries the track and, in modern systems, is thermally broken so that no cold bridge forms at floor level. Many manufacturers offer low threshold versions for a near step-free transition. How low your threshold can actually be depends on the floor build-up and the waterproofing; there is more on this in our article on the level-access patio door.

Sash and glazing

The sliding sash is a stable frame holding a sealed double- or triple-glazed unit. Since HST sashes are often more than two metres wide, it is mainly the glass that determines the weight. Triple glazing made of three 4 mm panes weighs around 30 kg per square metre, so a sash with 2.5 × 2.4 m of glass quickly puts 180 kg or more on the carriages.

Hardware and carriages

The hardware comprises the gearbox, handle, carriages and locking. Hardware manufacturers grade their systems by sash weight. Siegenia, for example, offers the PORTAL HS in classes up to 150, 250, 350 and 400 kg; the 400 kg version spreads the load across eight rollers on a pivoting mount. Which class is fitted is decided by the window fabricator on the basis of sash size and glazing build-up.

Benefits and limits at a glance

Criterion Lift-and-slide door Classic tilt-and-turn balcony door
Opening width very large, sashes over 2 m are common limited by sash width
Space needed indoors none, sash stays in its plane sash swings into the room
Threshold low versions available usually a higher stop
Tilting for ventilation not provided, only gap ventilation depending on the system yes
Operating a heavy sash easy thanks to the lifting mechanism heavy sashes strain the hinges
Price higher than a tilt-and-turn door lower

Benefits: large, unobstructed openings without a central post, no sashes projecting into the room, easy operation despite high weights, and good airtightness when closed.

Limits: an HST cannot be tilted. If you like to ventilate on tilt all day, you need an additional window or should consider a parallel-slide-tilt door (PSK). Installation also calls for experience: the threshold and frame must be exactly level and properly supported underneath.

Energy values and requirements when replacing a door

When an existing patio door is replaced, the German Building Modernisation Act (GModG, known as the Building Energy Act or GEG until July 2026) applies. Under Annex 7, door-windows with a folding, sliding or lifting mechanism in residential buildings must achieve a maximum of Uw 1.6 W/(m²K) (status: September 2026). The requirements only apply if more than 10 per cent of the building's window area is affected.

If you want to use BAFA funding for individual measures, you need to do considerably better: for windows and balcony or patio doors, a Uw of no more than 0.95 W/(m²K) is generally required (status: September 2026). Modern systems reach such values. Schüco, for instance, quotes a Uw of 0.92 W/(m²K) for its LivIngSlide uPVC system and values from 0.99 W/(m²K) for its ASE 80.HI aluminium system. The actual value of your door depends on size, glass and spacer, and is shown in the manufacturer's certificate. These rules are German; readers in the UK or elsewhere should check the requirements of their own building authority.

Security and ease of use

Large areas of glass on the ground floor are attractive to burglars. In Germany, the police recommend tested burglar-resistant windows and doors to DIN EN 1627, from resistance class RC 2, for new builds and conversions. Many lift-and-slide fittings are designed for this: Siegenia quotes burglar resistance up to RC 2 for the PORTAL HS 150 kg, locking via bolts in the gearbox. However, a resistance class always applies only to the tested complete unit of profile, hardware, glass and installation; a single component does not make an RC 2 door. For more, see our article on burglar protection for sliding doors.

For comfort, the weight class matters most. A correctly sized fitting lets even heavy sashes run with little effort. If you want even easier operation, or have limited strength, you can specify a motor drive that takes care of lifting, sliding and locking. Such drives are available concealed in the sash or as a retrofit solution.

When an HST is not the best choice

Versatile as the lift-and-slide door is, there are situations where other solutions suit better:

  • Narrow openings under about 1.6 m: with scheme A only a narrow passage remains. A double-leaf balcony door often opens wider.
  • Frequent tilt ventilation: the HST cannot be tilted. A PSK door or a separate window is more practical.
  • Tight budget at medium size: for openings up to about 2 m wide, a tilt-and-turn door or PSK door is usually cheaper.
  • Doubtful load-bearing capacity: heavy elements need a sound threshold support. With old timber-joist floors this must be clarified beforehand.

Materials and opening variants

HSTs are available in uPVC, aluminium, timber and timber-aluminium. uPVC scores on price and insulation, aluminium on slim sightlines and large formats. You will find a detailed comparison in our article on lift-and-slide doors in uPVC or aluminium.

Equally important is how the glazed front is divided: one sliding sash with a fixed panel, two sashes sliding towards the centre, or four-part installations. These variants are known as schemes. Which scheme suits your wall opening is explained in our article on HST schemes A, C, G and K.

Checklist: what to consider when planning

  • Check the opening: measure the structural opening in width and height at several points.
  • Choose the scheme: on which side should the sash run, and where does the furniture stand?
  • Clarify the weight: sash size and glazing build-up determine the hardware class.
  • Define the threshold: should the transition be near step-free? Then plan the floor build-up and waterproofing early.
  • Set the energy value: choose a Uw that matches the GModG requirement or your funding target.
  • Security: consider burglar-resistant specification for ground-floor doors.
  • Plan the installation: large elements need load-bearing capacity on site and enough people to lift them in.

Would you like to plan your patio door in detail? Our range includes made-to-measure lift-and-slide doors, and in the online configurator you can put together dimensions, scheme, colour and glazing and get a price immediately. For window fitters and building firms, a B2B account with tiered discounts is also worthwhile.

Frequently asked questions

How does a lift-and-slide door work?

Turning the handle raises the sliding sash, seals included, so that it rolls sideways on carriages. Turning the handle back lowers the sash and presses the seals tight again, which keeps the door airtight when closed.

How heavy can an HST sash be?

That depends on the hardware. Manufacturers such as Siegenia offer lift-and-slide hardware in weight classes from 150 kg to 400 kg of sash weight; the profile system can limit the permitted dimensions further.

Is a lift-and-slide door step-free?

Many systems offer low, thermally broken thresholds that allow near step-free installation. Whether the door is accessible under DIN 18040-2 depends on the installed threshold height and on how it connects to the floor and the waterproofing.

Which U-value must a lift-and-slide door meet when replaced?

Under Annex 7 of the German Building Modernisation Act (GModG), door-windows with a sliding or lifting mechanism in residential buildings must achieve a maximum of Uw 1.6 W/(m²K). BAFA funding requires considerably better values (status: September 2026).

Sources

  1. Hebeschiebetür – Wikipedia(opens in a new tab)
  2. SIEGENIA PORTAL HS 400 kg – Hebe-Schiebe-Beschlag(opens in a new tab)
  3. SIEGENIA PORTAL HS 150 kg – Hebe-Schiebe-Beschlag(opens in a new tab)
  4. Schüco Schiebetüren für Privatkunden – Systemübersicht(opens in a new tab)
  5. GModG-Infoportal: Fenster und andere transparente Bauteile(opens in a new tab)
  6. Anlage 7 GModG – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
  7. BAFA – Einzelmaßnahmen an der Gebäudehülle(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Lift-and-Slide Doors: uPVC or Aluminium?
Lift-and-slide doors

Lift-and-Slide Doors: uPVC or Aluminium?

uPVC or aluminium lift-and-slide doors: sizes, insulation values, looks, upkeep and price compared, with manufacturer data from Schüco, Aluplast and Gealan.

6 minutes read

Cover image: Level-Access Patio Door: Planning Step-Free Entry
Lift-and-slide doors

Level-Access Patio Door: Planning Step-Free Entry

Planning a level-access patio door: what DIN 18040-2 says on thresholds and clear widths, which door systems suit, and how to keep the transition watertight.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy