Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Lift-and-slide doors

uPVC or aluminium lift-and-slide doors: which material suits your project?

6 minutes read

Whether uPVC or aluminium lift-and-slide doors suit you better comes down to three questions: how large should the glazed front be, how slim should the frames look, and how much budget is available? uPVC offers very good insulation values at a lower price and covers most patio doors in a family home. Aluminium plays to its strengths with very large formats, slim sightlines and modern architecture.

The materials at a glance

uPVC

uPVC HSTs are made of multi-chamber profiles with steel or composite reinforcement. The profiles are considerably deeper than for windows: the Aluplast HST 85 system, for example, has a frame depth of 197 mm and a sash depth of 85 mm. The many chambers insulate well, the surface is easy to care for and can be white, coloured or finished with a decorative foil.

Aluminium

Aluminium is a very strong material, so profiles can be slimmer and still carry large, heavy sashes. To stop aluminium becoming a cold bridge, the profiles are thermally broken: a plastic insulating strip separates the inner and outer shells. The surface is powder-coated or anodised, which makes almost any RAL colour possible.

Comparison using manufacturer data

The following table shows figures from manufacturer documentation. It illustrates orders of magnitude but does not replace the data in your specific quotation.

System Material Max. sash (W × H) Max. element Uw per manufacturer
Schüco LivIngSlide uPVC 2,465 × 2,468 mm 5,000 × 2,600 mm 0.92 W/(m²K)
Aluplast HST 85 uPVC sash width up to 3,000 mm – Uf up to 1.1 W/(m²K)
Gealan HST (scheme A) uPVC sash weight up to 400 kg 6,500 × 2,700 mm Uf 1.3 W/(m²K)
Schüco ASE 60 Aluminium 3,200 × 3,500 mm 21,000 × 3,500 mm from 1.1 W/(m²K)
Schüco ASE 80.HI Aluminium 3,200 × 3,500 mm 21,000 × 3,500 mm from 0.99 W/(m²K)

The picture is clear: uPVC systems cover typical patio doors up to roughly five to six and a half metres wide. Aluminium systems reach taller sashes (up to 3.5 m) and very long fronts. The hardware makes a difference too: lift-and-slide fittings such as the Siegenia PORTAL HS are designed for timber, uPVC and aluminium elements, but the weight class must match the sash.

Insulation and funding

For thermal performance, good uPVC and aluminium systems today are close together. What matters is the Uw value of the whole element, which depends mainly on glazing, spacer and frame proportion. You can read more about these figures in Uw, Ug and Uf explained.

  • Statutory minimum when replacing: Annex 7 of the German Building Modernisation Act permits a maximum of Uw 1.6 W/(m²K) for door-windows with a sliding or lifting mechanism in residential buildings (status: September 2026).
  • For BAFA funding: as a rule, a maximum of Uw 0.95 W/(m²K) (status: September 2026). You can achieve this with both materials, usually only with triple glazing and a warm-edge spacer.

Both rules are German; readers in the UK or elsewhere should check their own building regulations and funding schemes.

Because aluminium HSTs often have very large areas of glass, the frame proportion is small and the glass dominates the Uw value. With smaller elements the frame has more effect, and well-insulated uPVC profiles have the advantage.

Looks and architecture

  • Sightlines: aluminium allows slim central sections and frames. If you want the maximum glass area, you will often end up with aluminium or with special panoramic systems.
  • Colours: uPVC is made in white, with foils (such as anthracite grey or a wood effect) or with aluminium cover shells. Aluminium can be powder-coated in virtually any RAL shade, even different inside and out.
  • Matching the house: with a uPVC facade and uPVC windows, a uPVC HST looks coherent. In new builds with aluminium windows and large glazed areas, aluminium gives a uniform appearance.

Sound insulation and burglar resistance

For protection against noise and burglary, too, the materials differ less than is often assumed. Glazing build-up, seals and hardware have the greatest influence. Schüco quotes the following values for its systems:

  • LivIngSlide (uPVC): sound insulation up to 45 dB, burglar resistance up to RC 2
  • ASE 60 (aluminium): sound insulation up to 41 dB, burglar resistance RC 2
  • ASE 80.HI (aluminium): sound insulation up to 43 dB, burglar resistance RC 2

The values show that a well-specified uPVC system can match or exceed aluminium for sound insulation. Bear in mind that maximum values always apply to specific tested configurations. For your element, what counts is the information in the manufacturer's declaration of performance.

Weight, stability and operation

A frequent argument for aluminium is stability. Aluminium profiles do carry high glass loads with a slim appearance. But modern uPVC systems also reach high sash weights thanks to steel reinforcement; up to 400 kg of sash weight is quoted for the Gealan system. Operation depends mainly on the hardware: if the weight class is chosen correctly, a heavy sash in either material moves easily.

One difference lies in temperature behaviour. Dark colours heat up strongly in the sun. For uPVC profiles in dark shades there are therefore often restrictions on sash size, or special foils and reinforcement are used. With anthracite or other dark colours, ask about the permitted dimensions.

Care, durability and price

Both materials are easy to look after: cleaning with water and a mild cleaner is enough. uPVC does not tolerate abrasive products, and powder coatings should not be treated with scouring pads either. More important than the frame material on any HST are the track and the threshold drainage; both should be cleared of dirt regularly. You will find details in our article on maintaining sliding doors.

On price, uPVC is generally below aluminium at a comparable size. However, the final price is just as much determined by sash weight, scheme, glazing, colour and threshold. For an overview of the cost factors, see the article What does a lift-and-slide door cost?

Sustainability and service life

Both materials are long-lasting if installed and maintained properly. Aluminium recycles very well; uPVC window profiles are also collected in Germany and processed into new profiles. For the service life of a lift-and-slide door, hardware and seals are in practice often more decisive than the frame material: carriages, gearbox and sealing profiles are wearing parts that can be adjusted or replaced on high-quality systems. When buying, ask whether spare parts for the chosen system will remain available in the long term.

Common misconceptions

  • "Aluminium is always cold." Modern, thermally broken aluminium profiles insulate well. Cold aluminium frames without an insulating strip are a thing of the past.
  • "uPVC turns yellow." White profiles from current production are UV-stabilised. Coloured foils and coatings change only slightly over many years, provided they are cleaned correctly.
  • "Large formats are only possible with aluminium." For many patio doors in family homes, uPVC systems are sufficient. Aluminium only becomes necessary with very tall sashes or long fronts.
  • "The material determines the Uw value." For large areas, the glazing has the greater influence.

Decision guide

Choose uPVC if…

  • the opening is up to about five metres wide,
  • good insulation values at a favourable price are the priority,
  • your other windows are uPVC as well.

Choose aluminium if…

  • sashes are taller than about 2.5 m or the front is very long,
  • slim sightlines and maximum glass area are wanted,
  • a special RAL colour or a two-tone finish is planned.

Checklist for your enquiry

  • Structural opening size and desired scheme
  • Target Uw value (statutory minimum or funding)
  • Colour inside and outside
  • Threshold type (standard or low-level)
  • Security features and glass type

Compare uPVC and aluminium variants directly in the configurator: dimensions and specification stay the same, only the system changes, and you see the price difference immediately. You will also find all variants on the lift-and-slide doors overview page.

Frequently asked questions

Is an aluminium lift-and-slide door better than uPVC?

Not as a rule. Aluminium allows slimmer frames and larger formats, while uPVC achieves very good insulation values at a comparable price. Size, desired look and budget are what decide.

What sizes are possible with a uPVC HST?

That depends on the system. Manufacturers quote element widths of roughly 5 to 6.5 metres for uPVC HSTs; Schüco, for example, gives a maximum of 5,000 × 2,600 mm per element for LivIngSlide.

Which HST qualifies for funding?

For BAFA funding it is the Uw value that counts, not the material. As a rule, no more than 0.95 W/(m²K) must be demonstrated; well-insulated uPVC and aluminium systems with triple glazing achieve this (status: September 2026).

Are there uPVC sliding doors with an aluminium look?

Yes. Many uPVC systems can be foil-wrapped on the outside or combined with aluminium cover shells, giving a metal look outside while the inside stays uPVC.

Sources

  1. Schüco Schiebetüren – Systemvergleich LivIngSlide, ASE 60, ASE 80.HI(opens in a new tab)
  2. Aluplast HST 85 mm – technische Daten(opens in a new tab)
  3. HST GEALAN – Maße und Flügelgewichte je Schema (rubo)(opens in a new tab)
  4. SIEGENIA PORTAL HS 400 kg – Beschlag für Holz, Kunststoff und Aluminium(opens in a new tab)
  5. BAFA – Einzelmaßnahmen an der Gebäudehülle(opens in a new tab)
  6. Anlage 7 GModG – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Level-Access Patio Door: Planning Step-Free Entry
Lift-and-slide doors

Level-Access Patio Door: Planning Step-Free Entry

Planning a level-access patio door: what DIN 18040-2 says on thresholds and clear widths, which door systems suit, and how to keep the transition watertight.

6 minutes read

Cover image: Lift-and-Slide Door: Design, Function and Benefits
Lift-and-slide doors

Lift-and-Slide Door: Design, Function and Benefits

How does a lift-and-slide door work? Construction, hardware, weight classes, threshold and energy values explained, plus the pros and cons of an HST.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy