Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Shutters, security & installation

Frame-mounted roller shutters: the integrated shutter solution for window replacement and new builds

7 minutes read

A frame-mounted roller shutter is a roller shutter box that is fitted to the window frame at the factory and supplied with the window as one unit. It sits within the wall opening, can be rendered over on the outside and is therefore almost invisible. When replacing windows it is often the cleanest solution, because window, box, insulation and connections are matched to each other, provided it is planned in from the start.

If you have an old, uninsulated lintel box, you can replace it at the same time with the frame-mounted roller shutter.

How a frame-mounted roller shutter is built

The frame-mounted box is pushed or screwed onto the top frame profile of the window. It contains:

  • the shaft with curtain and drive,
  • insulation that shields the box from the outside air,
  • an inspection opening for maintenance and motor replacement,
  • connection surfaces for render, insulation and sealing.

The guide rails are fixed at the side of the window or in the reveal. On some systems they are clipped directly onto the outer frame, on others they are screwed separately into the reveal, which affects how wide the visible face of the window looks from outside. Because box and window are connected, they form a closed unit that is placed and connected in the wall opening as a whole.

Advantages when replacing windows

  • Everything from one source: window and roller shutter are made, delivered and fitted together. Dimensions and connections match each other.
  • Invisible from outside: the box lies in the wall plane and is rendered over.
  • Better insulation than old boxes: modern frame-mounted boxes are insulated and connected to the window's airtightness layer. The classic uninsulated timber box in the lintel is no longer there.
  • No inside cover in the room with systems with outside access.
  • Plannable connections: the requirements for execution with minimal thermal bridging and airtightness, as they apply to German BEG funding and § 35c EStG, are easier to meet with a coordinated system.

Disadvantages and limits

  • Less glazed area: with the same structural opening, the window becomes lower by the height of the box. With small windows or balcony doors this can be a nuisance.
  • Advance planning needed: a frame-mounted roller shutter cannot simply be added later to an existing window.
  • Structure of the opening: the load of the box is carried through the window and its fixings. For large elements, additional fixings are needed.
  • Intervention in the facade: when replacing in an existing building, the old box must be removed and the opening reconnected on the outside.

Inspection access inside or outside?

A decision you should make before ordering:

Criterion Inside access Outside access
Access from the room, convenient from outside, ladder or scaffolding
Appearance inside visible cover smooth inside
Airtightness cover must close tightly no opening inside
Typical use ground floor, upper floor without scaffolding new build, easily reached facade

With inside access, the cover matters. It must close tightly, otherwise warm room air flows into the box and condenses there. With outside access the inside is free, but later repair is more laborious, especially on an upper floor.

Dimensions and planning

Structural opening and window size

For a frame-mounted roller shutter: structural opening = window height + box height + installation joints. The box height depends on the system and the curtain size. The taller the window, the longer the curtain, the larger the coil diameter and so the box. Have the manufacturer state the box height for your window size before you fix the window dimensions. How the opening is measured is explained in the article on measuring windows correctly.

Balcony doors and large elements

With balcony and patio doors, the passage height is decisive. If the box takes up too much height, the door becomes uncomfortably low. In such cases the opening can be enlarged upwards or a surface-mounted roller shutter chosen on the facade. For very wide elements such as lift-and-slide doors, an aluminium curtain and normally a motor are used.

Connection to the facade

The box must be tied in cleanly to render or external wall insulation system on the outside. Most systems have render carriers or connecting profiles for this. The joint between box and lintel is made like the rest of the window joint on the three-layer principle: airtight inside, insulated in the middle, driving-rain-tight outside. More in the article on the three-layer principle in window installation.

Frame-mounted, surface-mounted or integral?

Situation Recommendation
Window replacement, old box to be removed frame-mounted roller shutter
Window replacement, glazed area to stay as large as possible surface-mounted roller shutter on the facade
Retrofit roller shutter only, windows stay surface-mounted roller shutter
New build frame-mounted roller shutter or insulated lintel element

You will find a detailed comparison in the article Roller shutter types compared.

Plan the drive at the same time

The choice of drive also affects the box: strap winders need a strap feed-through and a winding point in the room, cranks a penetration through frame or wall, motors only a cable.

Because the frame-mounted roller shutter is newly installed with the window, this is the ideal moment for a motor. Cables can be laid in the open joint or reveal before plastering. Radio motors also save the switch cable in the room. If you want to integrate the roller shutter into a smart home later, look for a two-way radio system when ordering, such as io-homecontrol; details in the article on Somfy io-homecontrol.

Common planning mistakes

  • Box height clarified too late: if the window is ordered for the full opening height, the box no longer fits above it.
  • Inspection side not agreed: a box with outside access on an upper floor without scaffold access makes any later repair expensive.
  • Render connection forgotten: without suitable render carriers or connecting profiles, cracks appear between box and facade.
  • Motor planned only later: if you want to motorise afterwards, cables have to be pulled through at some effort.
  • Old lintel boxes not removed: if an old box stays as a cavity behind the new one, a hidden thermal bridge results.

Frame-mounted roller shutters and funding

Roller shutter boxes that are renewed and insulated as part of a funded window replacement are among the works connected with the window. Whether and to what extent the costs are taken into account for BAFA funding or the tax bonus (both German schemes) is best clarified in advance with your energy efficiency expert or tax adviser; readers elsewhere should check their local schemes. In any case it is important that the invoice itemises the positions clearly and that the connection is made with minimal thermal bridging and airtightly. Document the installation with photos before the joint is plastered.

Checklist for the frame-mounted roller shutter

  • Measure the structural opening and ask the manufacturer for the box height
  • Fix the window dimension allowing for the box height
  • Decide inspection access inside or outside
  • Choose curtain material and colour
  • Plan drive (strap, crank, motor) and power connection
  • Order an anti-lift device too
  • Agree the connection to render or external wall insulation with the installer
  • Allow for insect screens or later additions in the reveal so that rails and frames do not collide

You can put windows with a frame-mounted roller shutter together as one unit in the configurator. An overview of roller shutter systems and drives is in the roller shutters section.

Frequently asked questions

What is a frame-mounted roller shutter?

With a frame-mounted roller shutter, the box sits directly on the window frame and is supplied and installed with the window as one unit. It lies within the wall opening and can be rendered over on the outside.

Does the window get smaller with a frame-mounted roller shutter?

If the structural opening stays the same, yes: the box takes up part of the height, and the window below becomes correspondingly lower. This should be allowed for in planning, especially with balcony doors.

Can I use a frame-mounted roller shutter with an old lintel box?

Yes, if the old box is removed and the opening is planned afresh. The frame-mounted box then replaces the old box. How high the opening must be depends on the system and the curtain size.

How is a frame-mounted roller shutter maintained?

Depending on the system, via an inspection opening inside or outside. Inside access is easier to reach; outside access keeps the inside free of covers. The decision should be made before ordering.

Sources

  1. Wikipedia – Rollladen (Aufsatzkasten, Sturzkasten, Vorbau)(opens in a new tab)
  2. ift Rosenheim – Update Montageleitfaden Fenster und Außentüren(opens in a new tab)
  3. ESanMV Anlage 4 – wärmebrückenminimierte und luftdichte Ausführung(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Surface-Mounted Roller Shutters: Ideal for Retrofit
Shutters, security & installation

Surface-Mounted Roller Shutters: Ideal for Retrofit

Retrofitting surface-mounted roller shutters: construction, facade or reveal fixing, box shapes, materials, drives and what to note when measuring.

7 minutes read

Cover image: External Venetian Blinds or Roller Shutters: Which?
Shutters, security & installation

External Venetian Blinds or Roller Shutters: Which?

External venetian blind or roller shutter? Compare light control, heat protection, winter insulation, wind stability, security, blackout and appearance.

7 minutes read

Cover image: Roller Shutter Types: Surface, Top-Mounted, Integral
Shutters, security & installation

Roller Shutter Types: Surface, Top-Mounted, Integral

Roller shutter types compared: surface-mounted, frame-mounted and lintel-box shutters, with pros and cons, slat materials, drives and typical uses.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy