Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Costs & buying guides

Window Replacement Cost per Window: Material, Fitting, Disposal and Ancillary Work

7 minutes read

The window replacement cost per window is made up of four blocks: the new window, removal including disposal of the old one, fitting with sealing and the ancillary work on reveal and window board. For a standard-size uPVC window with triple glazing, current guides give roughly 700 to 1,400 euros including fitting. Where your window falls within this range is decided mainly by material, size and the condition of the building fabric. All prices here are in euros and come from the German market; prices elsewhere will differ.

Below we break down each cost item, using ranges supported by at least two current sources.

Window Replacement Costs at a Glance

Cost block Guide value per standard window Sources
New uPVC window without fitting approx. €270–630 (double glazed) or €200–390/m² Aroundhome, KfW figures in the range €290–390/m²
Fitting approx. €150–360 42watt (€150–300), Aroundhome (€200–360)
Removing old window approx. €20–40 Aroundhome (about €20), MyHammer (about €40)
Disposal approx. €15–30 42watt (€15–30), MyHammer (€20–30)
Reveal work in older buildings approx. €150–500 Oknoplast

The values come from guides of 2025 and 2026 and relate to standard sizes of about 1.2 × 1.4 m. They are guidance, not fixed prices. With fitting in particular the figures vary widely, because some sources count only putting the window in, others also sealing and connections.

Block 1: The New Window

The biggest single item is the window itself. The main levers:

  • Material: uPVC is the cheapest option; timber, aluminium and timber-aluminium cost, according to the guides, in some cases twice as much.
  • Size and division: double-sash windows, fanlights and special shapes raise the price disproportionately.
  • Glazing: triple glazing is standard; acoustic or safety glass costs extra.
  • Colour: foil finishes in anthracite or wood effect cost surcharges.

You will find a detailed explanation of these factors in the article What do new windows cost?.

Block 2: Removal and Disposal

Old windows are usually cut out: cut into the frame, lift out the sashes, break out the frame, remove fixings. With uPVC and timber windows this is generally quick. It becomes more involved with

  • old steel or compound windows,
  • heavily plastered or mortared-in frames,
  • windows with integrated roller shutter boxes that are also being replaced.

For disposal, the sources give 15 to 30 euros per window. Old uPVC windows can be recycled; timber windows with paint finishes generally count as waste wood. How removal proceeds in detail is covered in the article on removing and disposing of old windows.

Block 3: Fitting and Sealing

Fitting is more than putting the frame in. Done properly it includes:

  1. Aligning and fixing with frame plugs, screws or fitting anchors
  2. Insulating the joint between frame and masonry
  3. Airtight sealing inside (foil or tape)
  4. Driving-rain-tight but vapour-open sealing outside
  5. Adjusting the sashes and a function check

Guides give roughly 150 to 360 euros and about two to three hours of work for fitting a standard window, at hourly rates of around 45 to 80 euros. Fitting to the three-layer principle with foils and tapes costs more than plain foam fitting; Oknoplast puts the difference at about 100 to 160 euros per window. Why it is worthwhile is explained in the article on airtight inside, open outside.

Block 4: Ancillary Work That Is Often Underestimated

Reveal: after removal, the plaster on the reveal is damaged. Making good, filling and painting cost, according to Oknoplast, 150 to 500 euros per window in older buildings.

Window boards: new windows often have a different frame depth. Inside and outside window boards then no longer fit and have to be replaced or adapted.

Roller shutters: old roller shutter boxes are often thermal bridges. Anyone who renews or insulates them while replacing the windows saves later work.

Scaffolding and lifting equipment: on upper floors or with large elements, costs for scaffolding, hydraulic platforms or glass suction lifters are added.

Altered openings: if a wall opening is enlarged, for example for a floor-to-ceiling patio door, it becomes considerably more expensive. 42watt gives 1,000 to 1,700 euros extra for this; a structural engineer may also be needed.

Working Out Your Project

This is how to arrive at a reliable estimate:

  1. Draw up a window list with dimensions and the specification you want.
  2. Determine window prices for each item via a configurator.
  3. Apply fitting per window: the lower end of the range for standard windows, the upper end for large or difficult fitting situations.
  4. Add removal and disposal per window.
  5. Cost ancillary work specifically room by room: reveal, window boards, roller shutters.
  6. Allow a contingency of ten to fifteen per cent for surprises in older buildings.

Example: One Standard Window in an Older Building

Taking the lower and upper values of the ranges above, the following range of ancillary costs results for a uPVC window without special features: fitting 150 to 360 euros, removal 20 to 40 euros, disposal 15 to 30 euros, reveal 150 to 500 euros. Together that is roughly 335 to 930 euros in addition to the window price. The calculation shows above all one thing: with simple windows, fitting and ancillary work can cost about as much as the window itself. Anyone who compares only window prices overlooks the larger part of the differences.

Funding Is Deducted from the Total

Eligible are not only the windows but, as a rule, also the work associated with fitting. Two routes are available in Germany (as at September 2026):

  • BEG individual measure at BAFA: 15 per cent basic funding; windows must achieve a Uw value of no more than 0.95 W/(m²K), an energy efficiency expert must be involved and the application must be made before the contract is signed. The iSFP bonus of 5 per cent has applied since 21 July 2026 only to the share of eligible costs above 30,000 euros.
  • Tax bonus under § 35c EStG: 20 per cent of the costs, spread over three years, maximum 40,000 euros per property; the building must be more than ten years old and the work must be completed before 1 January 2030.

The two schemes cannot be combined for the same measure. A decision aid is given in the article on the tax bonus under § 35c EStG. Readers outside Germany should check which schemes apply in their own country.

How to Reduce the Cost per Window

  • Replace several windows in one go: travel and site set-up are spread.
  • Bundle identical dimensions and specifications.
  • Fixed glazing where no opening sash is needed.
  • Take on ancillary work such as painting the reveal yourself if you are handy, but leave the sealing to the specialist firm.

Checklist Before Replacing Windows

  • Window list with dimensions and specification drawn up
  • Funding route chosen and, where applicable, application made before the contract is signed
  • Quotes with separate items for windows, removal, disposal, fitting and reveal
  • Window boards and roller shutters thought through
  • Date for delivery and fitting agreed

You can work out the price of the windows themselves in the configurator for each item to measure. If you are also planning roller shutters, you will find suitable systems on the roller shutters page.

Frequently asked questions

What does replacing one window cost, including fitting?

For a standard-size uPVC window with triple glazing, current guides give roughly 700 to 1,400 euros including fitting. For timber, aluminium or timber-aluminium the amounts are considerably higher.

What does disposal of old windows cost?

Current guides give about 15 to 30 euros per window for disposal. If removal is counted in, figures are around 80 to 150 euros per unit.

How long does it take to replace a window?

For a standard window, guides allow roughly two to three hours of fitting time. Reveal and plastering work and drying times come on top.

Can I get funding when replacing windows?

Yes, in Germany through the BEG individual measures with 15 per cent basic funding or alternatively through the tax bonus under § 35c EStG with 20 per cent over three years (as at September 2026). Conditions include certain Uw values and fitting by a specialist company.

Sources

  1. Oknoplast: Fenster austauschen Kosten 2026(opens in a new tab)
  2. 42watt: Fenster mit Einbau – Kosten und Förderung (16.03.2026)(opens in a new tab)
  3. Aroundhome: Fenster Preise (aktualisiert 08.12.2025)(opens in a new tab)
  4. MyHammer Preisradar: Fenster einbauen (Stand 01.09.2026)(opens in a new tab)
  5. Energieheld: Neue Fenster – Kosten für Material und Einbau(opens in a new tab)
  6. Finanzamt NRW: Steuerermäßigung § 35c EStG(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Comparing Window Quotes: The Key Items to Check
Costs & buying guides

Comparing Window Quotes: The Key Items to Check

How to compare window quotes properly: what a complete quote includes, where hidden costs lurk and how to set prices side by side fairly.

7 minutes read

Cover image: Buy Windows from the Manufacturer or a Dealer?
Costs & buying guides

Buy Windows from the Manufacturer or a Dealer?

Windows direct from the manufacturer, a specialist dealer or online? Pros and cons of each sales channel on price, advice, fitting and warranty compared.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy