Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Costs & buying guides

Window Prices: What New Windows Cost and Which Factors Set the Price

7 minutes read

According to current guides, window prices for a standard-size uPVC window with triple glazing lie roughly between 700 and 1,400 euros including fitting. Without fitting, market overviews give about 200 to 390 euros per square metre of window area for uPVC windows. What you finally pay depends less on the "window price" itself than on size, material, glazing, specification and the effort on site. The prices quoted are in euros and come from the German market; prices in other countries will differ.

This guide shows which price ranges reputable sources currently give, why two apparently identical windows can cost very different amounts and how to plan your budget realistically.

Window Prices 2026: Market Prices at a Glance

Prices online almost always refer to a reference window, for example 1,230 × 1,480 mm or 1,300 × 1,300 mm, single-sash, white. The following ranges come from current guides and are guide values, not quotes:

Material Per window (standard size) Per m² without fitting
uPVC approx. €270–630 (double glazed, without fitting) to €700–1,200 (triple glazed, with fitting) approx. €200–390
Timber approx. €900–1,600 (triple glazed, with fitting) approx. €300–500
Aluminium approx. €1,000–1,600 (triple glazed, with fitting) approx. €300–600
Timber-aluminium approx. €1,300–2,200 (triple glazed, with fitting) approx. €700–1,200

Sources: Aroundhome (as at December 2025), 42watt (March 2026), Oknoplast (2026), MyHammer (September 2026). The values differ because each source assumes different sizes, glazing and scopes of work. That is exactly why you should never compare prices without looking at the details.

The Seven Most Important Price Factors

1. Size and Format

The price does not rise in line with area. Frame, hardware and manufacturing effort form a base amount that is incurred even for small windows. A bathroom window of 0.5 m² therefore costs considerably more per square metre than a large living room window. Special shapes such as round arches, slopes or triangles add to the effort.

2. Frame Material and Profile System

uPVC is generally the cheapest, while aluminium and timber-aluminium are well above it. Within one material, the profile system decides: frame depth, number of chambers, seal layer and steel reinforcement all affect insulation value and price. A profile with 82 mm frame depth and a centre seal costs more than a 70 mm entry-level profile; whether this is worthwhile depends on the building and on the funding requirements.

3. Glazing

Triple glazing is now standard in housing and costs somewhat more than double glazing, depending on the supplier. Marked surcharges arise for acoustic, safety (VSG, P4A) or solar-control glass, patterned glass in the bathroom and a warm edge instead of an aluminium spacer.

4. Opening Type and Division

A fixed-glazed element is the cheapest, a tilt-and-turn sash costs more. Double-sash windows with mullion or meeting stile, fanlights and transoms mean more profile, more hardware and more fitting time.

5. Colour and Finish

White is the standard. Decorative foils or colours such as anthracite RAL 7016 involve surcharges, which current guides put at about 8 to 15 per cent for standard foils and up to 30 per cent for more elaborate versions. The reasons are explained in our article on the colour surcharge on windows.

6. Security and Comfort

Burglar resistance to RC2, lockable handles, concealed hardware, trickle vents or integrated roller shutters raise the unit price. Which of these make sense depends on location and floor: on the ground floor, burglary protection is more worthwhile than on the second floor.

7. Fitting and Site

According to the sources mentioned, fitting costs roughly 150 to 360 euros per standard window, with removal and disposal of the old window on top. It becomes more expensive with elaborate reveal work, scaffolding, work on upper floors or when wall openings are altered. A detailed breakdown is given in the article on window replacement costs per window.

Worked Example: How a Total Budget Arises

A detached house with twelve windows of different sizes and a balcony door cannot be costed as "12 × average price". It is better to proceed like this:

  1. Draw up a window list: room, width × height, opening type, specification wanted.
  2. Add up the window area: this shows whether you have many small or a few large elements.
  3. Determine the material price: with an online configurator you get a concrete price for each element instead of a range.
  4. Allow for fitting and ancillary costs: removal, disposal, connections, window boards, reveals, scaffolding if any.
  5. Allow a contingency: in older buildings, surprises often turn up behind old frames, such as rotten lintels or crooked openings.

Why Quotes for the Same Window Differ So Widely

Anyone who obtains several quotes often sees differences of several hundred euros per window. There are usually understandable reasons for this:

  • Sales channel: a regional specialist firm costs in advice, survey, fitting, on-site warranty and overheads. With online made-to-measure purchase, part of this falls away, but you take on the survey and fitting organisation yourself.
  • Scope of work: one quote includes window boards, connection tapes and disposal, the other does not.
  • Level of specification: mushroom-head bolts, reinforcement, glass make-up and hardware make are seldom on the first page but change the price.

Compare items, therefore, not totals. How to do this step by step is shown in our guide to comparing window quotes.

Funding Reduces the Net Cost

New windows can be funded. Through the BEG individual measures in Germany, BAFA gives a basic funding rate of 15 per cent on eligible expenditure for measures on the building envelope. One condition is, among other things, a Uw value of no more than 0.95 W/(m²K) and the involvement of an energy efficiency expert; the application must be made before the contract is signed. Since 21 July 2026 the iSFP bonus of 5 per cent applies only to the part of the eligible costs above 30,000 euros (as at September 2026). You can read all the details in the article on BAFA funding for windows.

Alternatively, owner-occupiers can use the tax bonus under § 35c EStG: 20 per cent of the costs, spread over three years, if a specialist company does the fitting. Combining both for the same measure is not permitted. Readers outside Germany should check which schemes apply in their own country.

Where You Can Save, and Where Not

Sensible savings potential:

  • standard colour white inside instead of foil on both sides
  • fixed glazing where there is never any ventilation (for example stairwell, sidelights)
  • uniform dimensions where there are several identical windows
  • compare several quotes on an identical basis of work

Where you should not save:

  • Fitting: an incorrectly sealed connection causes thermal bridges, draughts and moisture damage. Proper execution following the principle "tighter inside than outside" is compulsory, not optional.
  • Survey: wrong dimensions on custom-made items can hardly be corrected.
  • Triple glazing and warm edge: they decide comfort and condensation at the glass edge.

Checklist: Putting Window Prices in Context

  • Does the price refer to a window with or without fitting?
  • What size, opening type and glazing does the price assume?
  • Are removal, disposal, window boards and connection material included?
  • Is VAT shown?
  • Does the window reach the values you need for funding?

If you want concrete figures for your project, put your windows together in the window configurator, measure by measure, with profile, glass, colour and accessories. You will find an overview of profiles and specifications on our page windows made to measure. For larger projects or questions about fitting, you can request an individual quote at any time.

Frequently asked questions

What does a new uPVC window cost with fitting?

Current guides give roughly 700 to 1,400 euros for a standard-size uPVC window with triple glazing, fitting included. Size, profile, hardware, colour and the effort on site shift the price markedly.

How much does a window cost per square metre?

For uPVC windows, current sources give about 200 to 390 euros per square metre of window area without fitting. Small windows cost more per square metre, because frame and hardware make up a larger share.

Why are small windows so expensive per square metre?

A window consists largely of frame, hardware and manufacturing effort, which hardly shrink with area. With small formats this fixed share is spread over little glass area.

Are there grants for new windows?

Yes. Through the BEG individual measures in Germany, BAFA supports window replacement with a basic funding rate of 15 per cent if, among other things, a Uw value of no more than 0.95 W/(m²K) is achieved (as at September 2026). The tax bonus under § 35c EStG is an alternative.

Sources

  1. Aroundhome: Fenster Preise – Was kosten neue Fenster? (aktualisiert 08.12.2025)(opens in a new tab)
  2. 42watt: Fenster mit Einbau – Kosten und Förderung 2026(opens in a new tab)
  3. Oknoplast: Fenster austauschen Kosten 2026(opens in a new tab)
  4. MyHammer Preisradar: Fenster einbauen – Kosten 2026(opens in a new tab)
  5. KfW: Fenster erneuern mit staatlicher Förderung(opens in a new tab)
  6. BAFA: Förderung Gebäudehülle (BEG EM)(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Buying Windows Online: What to Watch Out For
Costs & buying guides

Buying Windows Online: What to Watch Out For

Buying windows online without nasty surprises: survey, configuration, right of withdrawal, delivery, fitting and complaints. A practical guide.

7 minutes read

Cover image: Right of Withdrawal for Made-to-Measure Windows
Costs & buying guides

Right of Withdrawal for Made-to-Measure Windows

Right of withdrawal for made-to-measure goods: why windows to size usually cannot be withdrawn from, what the ECJ ruled and when withdrawal is still possible.

7 minutes read

Cover image: Buy Windows from the Manufacturer or a Dealer?
Costs & buying guides

Buy Windows from the Manufacturer or a Dealer?

Windows direct from the manufacturer, a specialist dealer or online? Pros and cons of each sales channel on price, advice, fitting and warranty compared.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy