Lift and Slide Door Cost: What a Patio Door Costs by Width, Material and Specification
7 minutes read
The cost of a lift and slide door (HST in German) depends above all on width, frame material and specification. Current 2026 market overviews give around 3,500 euros without fitting, or roughly 2,800 to 4,500 euros including fitting, for a 3 m wide uPVC lift and slide door; aluminium is noticeably higher. Depending on the site, fitting, threshold work and extras such as a motor drive come on top. All prices here are in euros and come from the German market; prices elsewhere will differ.
The sections below show the ranges given by two current sources, explain the price drivers and help you plan a realistic budget.
Lift and Slide Door Cost: Market Prices by Width
The two sources calculate differently, one including and one excluding fitting. We therefore present them separately:
Oknoplast (March 2026), two-sash, including fitting:
| Material | 2,400 mm | 3,000 mm | 4,000 mm |
|---|---|---|---|
| uPVC | €2,200–3,500 | €2,800–4,500 | €3,800–5,500 |
| Timber-aluminium | €3,500–5,500 | €4,500–7,000 | €6,000–9,000 |
| Aluminium | €4,500–6,500 | €5,500–8,000 | €7,000–11,000 |
hebeschiebetuer.com (prices as at September 2026), without fitting, including VAT:
| Material | 2 m | 3 m | 4 m | 6 m |
|---|---|---|---|---|
| uPVC | approx. €2,940 | approx. €3,560 | approx. €4,190 | approx. €5,490 |
| Aluminium | approx. €3,470 | approx. €4,510 | approx. €5,010 | approx. €5,790 |
Both sources confirm the basic order: uPVC is cheapest, aluminium and timber-aluminium cost more, and the price rises with width, though not in a straight line. The differences between the sources show how strongly specification and supplier shape the price.
The Most Important Price Drivers
Width, Height and Sash Weight
A lift and slide door lives on large areas of glass. With every increase in size, glass weight, hardware class and profile requirements rise. hebeschiebetuer.com gives a surcharge of about 2 to 3 per cent for each additional 10 cm of height. Very heavy sashes need stronger carriages and, where appropriate, a drive.
Opening Configuration
The standard configuration A (one sliding sash, one fixed panel) is cheapest. Configurations with two sliding sashes, a central opening or four panels cost more because more hardware and seals are used. The variants are explained in the article on lift and slide door configurations A, C, G and K.
Material and Profile System
uPVC lift and slide doors are attractively priced and well insulated. Aluminium offers slimmer sightlines and high stability in large formats. You will find a direct comparison in the article Lift and slide door in uPVC or aluminium.
Glass
Triple glazing is usually needed for BEG funding in Germany. hebeschiebetuer.com puts the surcharge over double glazing at 15 to 25 per cent, Oknoplast at 400 to 900 euros. Safety glass (toughened or laminated) is often required anyway for floor-to-ceiling elements.
Colour and Finish
Special colours and decorative finishes cost about 8 to 15 per cent more, according to hebeschiebetuer.com.
Surcharges for Specification
Oknoplast gives the following typical surcharges (March 2026):
| Option | Surcharge |
|---|---|
| Burglar resistance RC2 | €300–600 |
| Flush threshold (accessible) | €200–500 |
| Motor drive | €800–1,800 |
| Smart-home integration | €1,200–2,500 |
| Preparation for external venetian blinds | €600–1,200 |
Whether a motor is worthwhile depends on sash weight and how much you value comfort. With very large, heavy sashes it makes operation noticeably easier.
Fitting and Ancillary Costs
Fitting a lift and slide door is considerably more involved than fitting a window: heavy elements, exact alignment of the track, and sealing of the threshold to the terrace surface. The sources give:
- Fitting into an existing opening: Oknoplast 500 to 900 euros; hebeschiebetuer.com, depending on width, 650 to 1,100 euros (2 m) up to 800 to 1,400 euros (3 m).
- Structural reinforcement (lintel, enlarging the opening): Oknoplast 500 to 1,500 euros, plus, where applicable, a structural engineer for 200 to 600 euros.
- Threshold and floor adjustment: 150 to 500 euros.
- Disposal of the old door: 100 to 200 euros.
Often not included are a crane or glass suction lifter for very large elements, adjustments to the terrace surface and drainage channels in front of level thresholds. How the threshold is connected watertight is explained in the article on flush thresholds and sealing.
Example: How a Lift and Slide Door Budget Is Made Up
Suppose you replace an old two-sash patio door with a 3 m wide uPVC lift and slide door in configuration A, triple glazed, white, into an existing opening. Using the values from hebeschiebetuer.com, this gives:
- Element without fitting: around 3,560 euros
- Fitting: 800 to 1,400 euros
- Disposal of the old door: 100 to 200 euros (Oknoplast)
- Threshold adjustment, if needed: 150 to 500 euros (Oknoplast)
That comes to roughly 4,600 to 5,700 euros, before extras such as a motor, RC2 or a colour on the outside. The Oknoplast range for the same width including fitting (2,800 to 4,500 euros) is partly lower because it is based on a different scope of work. Such differences are normal. They show why you should always compare quotes on the same dimensions and services.
Alternative: Tilt-and-Slide Door
If the budget is tight and the opening is not very wide, a tilt-and-slide door (PSK) can be an alternative. It is often cheaper and can be tilted and slid, but usually offers less ease of use with large sashes and a higher threshold. The differences are explained in detail in the article PSK versus lift and slide door.
Where You Can Save, and Where Not
Sensible savings:
- Configuration A instead of a four-panel system, if the width allows
- White inside, colour only outside
- Fixed panels where you will place furniture anyway
Where you should not save:
- Threshold sealing: water damage to the screed costs many times more.
- Fitting: a poorly aligned track makes the door stiff and leaky.
- Glass: safety glass in walk-up areas and a good Ug value pay off over decades.
Allow for Lead Time
Lift and slide doors are made to order and have longer lead times than windows. One online supplier, for example, gives 4 to 7 weeks for a white uPVC lift and slide door and 8 to 10 weeks for aluminium systems; special colours lengthen this. These are the figures of a single supplier, so plan on the basis of your supplier's order confirmation. Agree the fitting date only once the delivery window is fixed, and clarify how the element gets from the lorry to the point of installation.
Funding for Lift and Slide Doors
In Germany a lift and slide door counts as a window door and can receive a grant of 15 per cent basic funding under the BEG individual measures if it achieves a Uw value of no more than 0.95 W/(m²K), an energy efficiency expert is involved and the application is made before the contract is signed (as at September 2026). With large lift and slide doors with slim aluminium profiles, the Uw value should be checked in advance for the specific size. Readers outside Germany should check which schemes apply in their own country.
Checklist for Planning a Lift and Slide Door
- Decide width, height and configuration
- Choose material according to appearance, insulation value and budget
- Clarify glass make-up, including safety glass
- Threshold: accessible or standard, drainage outside
- Have the structure checked if the opening is being enlarged
- Organise access and lifting equipment for delivery
- Apply for funding before the contract is signed
- Plan sun protection and insect screens at the same time, so that guide rails and boxes do not have to be retrofitted later
You can work out the specific price for your preferred dimensions in the configurator. An overview of profiles, configurations and options is on the lift and slide doors page.
Frequently asked questions
What does a uPVC lift and slide door cost?
Current market overviews give, depending on the source, around 3,500 euros without fitting for a 3 m wide uPVC lift and slide door, or roughly 2,800 to 4,500 euros including fitting. Dimensions, glass, colour and configuration change the price markedly.
How much does it cost to fit a lift and slide door?
For fitting into an existing opening, current sources give roughly 500 to 1,400 euros, depending on the width. Structural alterations, threshold work or a crane may be added where needed.
Why is an aluminium lift and slide door more expensive?
Aluminium profiles with a thermal break are more involved to make and are powder coated. In return they allow slimmer sightlines and larger sashes.
Is a lift and slide door eligible for funding?
Yes, in Germany it counts as a window door under the BEG individual measures if it achieves a Uw value of no more than 0.95 W/(m²K) and meets the other conditions (as at September 2026).
Sources
- Oknoplast: Hebe-Schiebe-Tür Kosten 2026 (06.03.2026)(opens in a new tab)
- hebeschiebetuer.com: Hebeschiebetür Preise 2026 (Preisstand September 2026)(opens in a new tab)
- Fensterversand: Lieferzeit für Fenster und Türen(opens in a new tab)
- Sofort-Förderung: Förderung für neue Fenster 2026(opens in a new tab)
- BAFA: Förderung Gebäudehülle(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.