Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Shutters, security & installation

Surface-mounted roller shutters: why they suit retrofitting so well and how to plan them

7 minutes read

A surface-mounted roller shutter is the simplest way to retrofit roller shutters to existing windows: box, guide rails and curtain form a closed system that is fitted outside, in the reveal or on the facade. Wall and window stay untouched, no new thermal bridge is created, and installation usually takes only a short time per window. The price for this is a visible box on the facade.

For older buildings without a roller shutter box, for rented flats with the owner's consent and for windows that are not to be replaced, it is therefore often the first choice.

Construction of a surface-mounted roller shutter

A surface-mounted roller shutter consists of:

  • Box (cover): usually aluminium, in square, round or bevelled form. It houses the shaft, curtain and drive.
  • Guide rails: at the sides, they guide the curtain and take wind loads.
  • Curtain: slats of plastic or aluminium; for surface-mounted shutters mostly foam-filled aluminium.
  • Bottom rail: the lower end, often with a seal and stop.
  • Drive: strap, crank or tubular motor in the shaft.

Because everything comes as a unit, the surface-mounted roller shutter is largely independent of the wall construction. It is simply fixed to a load-bearing substrate. In many cases a ladder is enough for installation; for upper floors and large elements, scaffolding or an access platform makes sense. If a motor is fitted, a power supply is also needed, which for facade fixing is usually led through the wall or the window frame. This penetration must be sealed carefully so that neither air nor moisture gets in.

Fixing options: reveal or facade

Fixing in the reveal

The box sits at the top of the window opening, the guide rails left and right in the reveal. This variant looks tidier because the roller shutter stays flush with the wall.

  • Prerequisite: sufficient reveal depth for box and rails
  • The box covers part of the upper window area
  • Window sashes and handles must not collide with the rails

Fixing on the facade

Box and rails are placed outside in front of the wall, with the box above the window opening.

  • The glazed area stays completely free
  • Suitable for shallow reveals or if the reveal is insulated or clad
  • The roller shutter is more clearly visible and shapes the facade more strongly
Criterion Reveal Facade
Appearance more restrained more clearly visible
Daylight slightly reduced unchanged
Prerequisite deep reveal load-bearing facade above the opening
Insulated facade (external wall insulation) usually feasible plan fixing through the insulation

With a facade with an external wall insulation system, the fixing needs particular planning. Screws must hold in the load-bearing masonry without compressing the insulation or creating a thermal bridge. Special mounting elements exist for this.

Box shapes and colours

Surface-mounted roller shutters come in different box shapes:

  • Square: clean line, suits modern architecture and window profiles with straight edges
  • Bevelled (45° or 20°): softer transition, water runs off better
  • Round or quarter-round: more discreet, often chosen for older buildings

Box and guide rails can be colour-matched to the window frame or facade, for example in anthracite or white. That helps the box recede visually.

Surface-mounted shutters compared with other types

Compared with the frame-mounted and the integral roller shutter, the surface-mounted roller shutter has clear strengths in retrofitting and thermal protection, but drawbacks in appearance. You will find the detailed comparison in the article Roller shutter types compared. If you are installing new windows anyway, you should also consider the frame-mounted roller shutter.

Why the surface-mounted roller shutter scores on thermal protection

The box lies entirely outside the insulated building envelope. There is no cavity in the wall and no inspection cover in the room through which air or heat could escape. At the same time, the closed roller shutter acts in winter like an additional air cushion in front of the window and reduces heat loss at night. In summer, as external sun protection, it keeps heat outside, far more effectively than internal blinds.

Measuring: what matters

For a clean result, the measurements must be right. The basics of measuring are explained in the article on measuring windows correctly; for surface-mounted roller shutters a few points are added:

  1. Decide the fixing type: reveal or facade.
  2. Reveal fixing: measure the clear width at the top, in the middle and at the bottom; the smallest dimension counts. Height from the window sill to the top of the opening.
  3. Check reveal depth: from the window frame to the outer edge; is it enough for box and rails?
  4. Facade fixing: choose width and height so that the rails sit on a load-bearing substrate and fully cover the opening.
  5. Note obstacles: sill overhang, handles, shutters, cables, external lights.
  6. Fix the drive side and power connection: where do the strap or the cable go?

Drive and security

For smaller windows a strap or crank is enough. From medium sizes up, and for more comfort, a tubular motor makes sense. Radio motors save laying a switch cable in the room; two-way systems report the position back. Modern motors offer obstacle detection and, depending on the model, also detect a curtain frozen in place. More on the options in the article on retrofitting a roller shutter motor.

An anti-lift device should always be included. It prevents the closed curtain from being pushed up from outside. It does not replace the burglar protection of the window itself; that is the job of fitting and glazing.

Typical applications

  • Older building without a roller shutter box: in the past, folding shutters or no sun protection at all were often fitted. A surface-mounted roller shutter fixed in the reveal complements the windows without intervening in the wall.
  • New windows without a roller shutter: if you did without roller shutters when replacing windows and now want to retrofit, you do not have to touch the new windows again.
  • Heat protection in the loft: gable windows in attic flats heat up strongly in summer. An external surface-mounted roller shutter keeps the radiation out before it reaches the glass.
  • Large patio door: with an aluminium curtain and motor, even wide elements can be retrofitted, provided the facade and reveal allow secure fixing.
  • Insulated facade: after facade insulation, the old lintel boxes have often been closed up. A surface-mounted roller shutter on the new facade is then a practical solution.

What retrofitting does not solve

A surface-mounted roller shutter changes nothing about leaky or poorly insulating windows. If the windows are old anyway, check whether replacing windows and roller shutters together makes more sense; a frame-mounted roller shutter then also comes into question. Nor does it replace burglar-resistant fittings; during the day the roller shutter is open, and the window has to stand up on its own.

Checklist for retrofitting

  • Clarify consent: owners' association, landlord, heritage protection or design bylaws; if in doubt, the development plan and the local building authority have the last word, and this article does not replace legal advice
  • Choose the fixing type and check the reveal depth
  • Choose box shape and colour to suit window and facade
  • Fix the curtain material according to width
  • Plan drive and power connection
  • Order an anti-lift device too
  • Document the measurements with a sketch and add photos of the window opening from outside

Made-to-measure surface-mounted roller shutters are in the roller shutters section. If you have questions about fixing type and measuring, our team can help via the contact page.

Frequently asked questions

What is a surface-mounted roller shutter?

A surface-mounted roller shutter is a complete shutter system of box, guide rails and curtain that is fitted outside in front of the window. It needs no box in the wall and can be retrofitted to existing windows.

Reveal or facade: where is a surface-mounted roller shutter fitted?

If the reveal is deep enough, it is fitted in the reveal; the box then sits at the top of the opening. If the reveal is too shallow or the glazed area is to stay free, it is fitted on the facade above the window.

Will I lose light with a surface-mounted roller shutter?

Fitted in the reveal, the box covers part of the window height. Fitted on the facade above the opening, the glazed area stays free, but the box is more clearly visible.

Do I need permission for a surface-mounted roller shutter?

In Germany, retrofitting roller shutters generally does not require a permit. In conservation areas, where design bylaws apply or in owners' associations, however, consent may be needed. If in doubt, ask the municipality or the management. Readers in the UK should check planning rules for conservation areas and listed buildings and, for leasehold properties, the landlord's consent.

Sources

  1. Wikipedia – Rollladen (Vorbaurollladen, Materialien, Antriebe)(opens in a new tab)
  2. caliso – Somfy Oximo io: Baureihen, Hinderniserkennung, Frostschutz(opens in a new tab)
  3. Polizeiliche Kriminalprävention – Einbruchschutz am Fenster(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Roller Shutter Types: Surface, Top-Mounted, Integral
Shutters, security & installation

Roller Shutter Types: Surface, Top-Mounted, Integral

Roller shutter types compared: surface-mounted, frame-mounted and lintel-box shutters, with pros and cons, slat materials, drives and typical uses.

7 minutes read

Cover image: Frame-Mounted Roller Shutters for Window Replacement
Shutters, security & installation

Frame-Mounted Roller Shutters for Window Replacement

Frame-mounted roller shutters when replacing windows: construction, pros and cons, inspection inside or outside, insulation, dimensions and planning tips.

7 minutes read

Cover image: External Venetian Blinds or Roller Shutters: Which?
Shutters, security & installation

External Venetian Blinds or Roller Shutters: Which?

External venetian blind or roller shutter? Compare light control, heat protection, winter insulation, wind stability, security, blackout and appearance.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy