Replacing Window Seals: Identify the Material, Fit New Seals and Care for Them Properly
6 minutes read
You should replace a window seal when it is cracked, hard or permanently flattened and the window draughts even though the hardware is correctly adjusted. On most uPVC and timber windows, the sash seals sit in a groove and can be replaced with the matching replacement profile. First, though, take a look at the hardware: often it is not the seal that is defective but the compression that is too low.
What the window seal does
Seals are inconspicuous but decide comfort and energy use. They prevent draughts and driving rain, dampen sound and compensate for small movements between sash and frame. A modern window generally has several sealing levels:
- Stop seal outside and inside: They lie between sash and frame and are compressed when the window closes.
- Centre seal: In centre-seal systems, an additional seal sits in the frame between the two stop levels. The differences are explained in Centre seal vs stop seal.
- Glazing seal: It seals the glass pane against the sash and glazing bead.
Materials: EPDM, TPE and others
| Material | Properties | Notes |
|---|---|---|
| EPDM (synthetic rubber) | Elastic, resistant to UV, ozone and temperature swings | Widespread, regarded as durable |
| TPE (thermoplastic elastomer) | Easy to process, often co-extruded directly into the profile or welded | According to manufacturers, usually less resistant to temperature and ozone than EPDM |
| Silicone | Very soft and temperature-resistant | More for special applications |
The window manufacturer Weru describes EPDM as particularly resistant to temperature, UV radiation and ozone. Which seal is in your window is rarely written on the frame. Clues are given by the year of manufacture, the profile manufacturer (often embossed in the rebate) and the shape of the seal's root.
Checking the window seal: the main signs
- Draught: A candle flame or incense stick at the closed window flickers.
- Paper test: Trap a sheet of paper between sash and frame. If it pulls out without resistance, compression is lacking.
- Visual check: Cracks, fraying, a sticky surface, gaps at the corners.
- Whistling in wind or distinctly more street noise than before.
- Damp patches or mould in the seal groove.
Mould on seals is usually a sign of high humidity and condensation. The German Federal Environment Agency recommends a relative humidity between 40 and 60 per cent and short purge ventilation. More in Condensation on windows.
Check the hardware first, then replace the seal
Many "leaky" windows have intact seals but hardware out of adjustment. On most tilt-and-turn hardware, the locking pins on the sash can be turned eccentrically to increase the compression. Set them slightly tighter in winter and slightly looser in summer; too much pressure makes the seal age faster. Instructions for adjusting are in Adjusting and maintaining windows.
If the sash visibly sags or scrapes, the corner hinge and stay arm must be readjusted. Only when the window closes cleanly and still draughts does a seal replacement make sense.
Replacing a window seal: step by step
1. Obtain the right replacement profile
Seals are profile-specific. What matters is the shape of the root that engages in the groove and the geometry of the sealing lip. The safest way is to cut out a piece of the old seal and have the right profile identified by a specialist dealer or through the profile manufacturer. Also measure the perimeter of the sash and add some reserve.
2. Remove the old seal
Seals pulled into a groove can be gripped at one corner and pulled out. Then clean the groove thoroughly; dust and old care products prevent the new seal from seating cleanly.
3. Fit the new seal
Start in the middle at the top of the sash, not in a corner. Press the seal into the groove without tension; stretched seals contract later and leave gaps. In the corners, do not kink the seal but, depending on the system, guide it round the corner or cut it on the mitre. The butt joint should be slightly compressed so that no gap remains.
4. Check function
Close the window, repeat the paper test and, if necessary, readjust the compression on the hardware.
When a specialist firm is the better choice
- Seals are welded or co-extruded in the corners.
- The glazing seal or the centre seal in the frame is affected.
- The profile is no longer available and has to be replaced.
- Several windows show problems at the same time, possibly together with hardware damage.
Caring for window seals properly
- Cleaning: once or twice a year with a soft, damp cloth and mild washing-up liquid, without harsh cleaners.
- Care product: Then apply a thin coat of a rubber care product, for example silicone-based. This keeps the seal supple and stops it freezing to the frame in winter.
- Keep paint away: Never paint over seals; paint makes them hard.
- Remove condensation: In winter, wipe moisture off frame and seal so that no mould forms.
Typical mistakes when replacing seals
Most problems after a replacement arise from small things:
- Wrong profile: A seal that "roughly fits" often seals on only part of the perimeter. Sealing lips that are too tall make closing harder and stress the hardware.
- Fitted stretched: If the seal is pulled while being fitted, it shrinks back later and gaps appear at the corners.
- Groove not cleaned: Old care-product residue and dirt prevent the seal root from engaging fully.
- Only one side replaced: With stop seals, the inner and outer levels work together. If the opposite seal is also hardened, the effect stays small.
- Silicone as a substitute: A bead of silicone in the groove does not replace a profile seal. It adheres poorly, tears when opening and is hard to remove later.
After replacement, the window should close with normal effort. If the handle goes markedly harder than before, the seal is too tall or the compression is set too strong.
When replacing the windows is worth more
Once the seals are renewed, old windows with double-pane insulating glass or single glazing remain weak in energy terms. If hardware is also worn, frames distorted or panes misted, replacement is often the more economical solution. How much energy new windows actually save is shown in Window replacement: how much heating energy do you really save?.
With new windows too, seals are wear parts. If you care for them from the start and check the hardware regularly, you extend their life considerably and prevent small leaks developing into moisture damage to frame and reveal.
Checklist
- Carry out the paper test at several points on every sash.
- Check and adjust hardware and compression.
- Inspect the seal for cracks, hardening and gaps.
- Identify the replacement profile from a sample piece.
- Fit the seal without tension and test the function.
- Clean and care for seals annually.
If repairs mount up, take a look at new windows: in our windows overview you will find profiles with stop and centre seals for new-build and refurbishment.
Frequently asked questions
How do I know that the window seal needs replacing?
Typical signs are draughts with the window closed, cracks, hard or permanently flattened seals, gaps in the corners and whistling noises in wind. A simple test: trap a sheet of paper and check whether it pulls out easily.
Can I replace window seals myself?
Sash seals that sit in a groove can often be replaced yourself if you obtain the right profile. For welded-in seals, centre seals or glazing seals, a specialist firm is the better choice.
What do you use to care for window seals?
Clean with a soft, damp cloth and mild cleaner, then apply a thin coat of a care product for rubber seals, for example silicone-based. Harsh cleaners and solvents damage the material.
Does replacing the seal help if the window still draughts?
Not always. Often the hardware is out of adjustment so that the sash no longer presses on evenly. Then readjusting the compression at the locking pins helps.
Sources
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.