Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Energy & grants

Window replacement and saving energy: how much heating energy new windows really save

7 minutes read

The worse the old windows and the larger the window area, the more energy a window replacement saves. You can estimate the saving yourself: difference of the U-values × window area × degree days × 24 hours gives the transmission heat saved in watt-hours per year. On top of that comes a share from tighter joints that is hard to quantify.

Flat percentage promises, on the other hand, help little. This article shows how to calculate realistically with your own figures.

Why flat savings promises mislead

How much heating energy you save with new windows depends on at least five factors:

  • U-value of the old windows. Single glazing, early insulating glazing or double-glazed thermal insulation glass differ by a multiple.
  • Window area. An old building with a few small windows saves less in absolute terms than a house with large glass areas.
  • Climate at the location. The heating season in an upland village is longer and colder than in a mild location.
  • Airtightness. Leaky joints in old windows cause ventilation heat losses that the U-value does not capture.
  • Heating system and user behaviour. Boiler efficiency, room temperature and ventilation decide how much of the saving shows up on the meter.

A flat figure cannot reflect all that. The following calculation can.

Window replacement and saving energy: the formula with U-value, area and degree days

The U-value describes how much heat flows through a component per square metre per kelvin of temperature difference, in W/(m²K). To turn that into an annual figure, you need the degree-day figure. In Germany it is usually given as GTZ 20/15 under VDI 2067 and DIN 4108-6: the sum of the differences between a room temperature of 20 °C and the daily mean outside temperature on all days below 15 °C.

The simplified calculation is:

Heat saved (kWh/year) = (U old − U new) × window area (m²) × degree days (Kd) × 24 h ÷ 1,000

Degree-day figures are based on measurement data from the German Weather Service; your energy adviser can give you the value for your location (in the UK, degree-day data are published by the Met Office and other providers, usually on a base of 15.5 °C, so values are not directly comparable). For an example we use 2,286 Kd, the value energie-experten.org gives for Hanover.

Worked example: detached house

Suppose a house has 20 m² of window area. The old windows have early insulating glass; for such glazing the technical literature gives about 3.0 W/(m²K) in the glass. We calculate cautiously with Uw 2.8 W/(m²K) for the whole window. The new windows achieve Uw 0.9 W/(m²K).

  • Difference: 2.8 − 0.9 = 1.9 W/(m²K)
  • 1.9 × 20 m² × 2,286 Kd × 24 h = 2,084,832 Wh
  • Result: around 2,085 kWh of transmission heat per year

The heating no longer has to supply this heat. Because every heating system has losses, the final energy saved (gas, oil, electricity for the heat pump) is somewhat higher depending on the system or, with heat pumps, considerably lower. You get the money value by multiplying the kWh by your current energy price.

Comparing different starting points

With the same area and degree days, different old windows give the following (example values, not measurements):

Old windows (assumed Uw) New Uw 0.9 Saving per year
Early insulating glass, Uw 2.8 0.9 approx. 2,085 kWh
Double-glazed thermal insulation, Uw 1.6 0.9 approx. 770 kWh
Double-glazed thermal insulation, Uw 1.3 0.9 approx. 440 kWh

The table shows why replacing younger double-glazed windows brings less in energy terms. Whether triple glazing is still sensible is covered in the article Triple glazing: is it worth it?. How U-values come about is explained in understanding the window U-value.

What the formula does not capture

The calculation looks only at heat conduction through glass and frame. In practice there are further effects, in both directions.

Additional savings:

  • Tight joints. Old windows with worn seals constantly let cold air in. New windows with all-round seals and an airtight connection reduce these ventilation heat losses.
  • Comfort. Warmer glass surfaces reduce cold downdraughts. Many occupants then turn the room temperature down slightly without feeling cold.

Opposing effects:

  • Solar gains. Triple glazing usually lets in slightly less solar energy than double glazing; details in the article on the g-value.
  • Ventilation behaviour. If you keep the windows permanently tilted after replacement, you give the saving away. The German Environment Agency advises short, wide-open airing instead of permanent tilt.
  • Poor installation. A badly insulated connection creates thermal bridges that eat up part of the benefit.

Individual rooms: why large glass areas count particularly

The formula also works for individual components. An old patio door with 5 m² of glass and frame area and an assumed Uw of 2.8 W/(m²K) loses 2.8 × 5 × 20 = 280 watts at a temperature difference of 20 K between inside and outside, continuously for as long as it is that cold outside. With a Uw of 0.9 W/(m²K) it is still 90 watts. With lift-and-slide doors, panoramic windows and conservatory connections in particular, a close look is worthwhile because they can make up a large part of the total window area.

Besides energy, comfort plays a big role there: in front of a cold glass area, cold downdraughts form that you feel at floor level as a draught. Many occupants therefore find the rooms much more comfortable after replacement, even if the meter reading falls only moderately.

Heat pump: why windows affect the flow temperature

If you are planning a heat pump, you benefit twice. Lower heat losses reduce the heat load of the rooms. Radiators or underfloor heating can then work at a lower flow temperature, which improves the efficiency of the heat pump. How strong this effect is depends on the whole building and should be determined in a heat load calculation.

How to work out your own figures

  1. Record the window area. Add up width × height of each window (outside dimension of the frame).
  2. Estimate the old U-value. Clues are given by the year of construction, the glass stamp in the cavity or old invoices. An energy adviser can determine the value reliably.
  3. Fix the new U-value. What counts is the Uw of the whole window in your size, not just the Ug of the glazing.
  4. Determine the degree days. Use a long-term average for your location if possible, not the value of a single mild or cold winter.
  5. Calculate and compare with consumption. Set the result against your heating energy consumption of recent years.

If the result is small relative to total consumption, the main potential probably lies in walls, roof or heating. Then a renovation roadmap that sets the sequence is worthwhile.

Conclusion and next step

  • With single glazing and early insulating glass, noticeable savings are realistic.
  • With thermal insulation glass from the 1990s and 2000s, the savings are smaller; comfort, sound insulation and security become more important.
  • Funding improves the sums: 15% BAFA grant or 20% tax bonus in Germany (status: September 2026), see BAFA funding for windows 2026. Those schemes are German; readers elsewhere should check their local schemes.
  • After replacement, ventilate consciously and keep an eye on humidity.

If you want to know which Uw values are achievable for your dimensions, put your windows together in the configurator; you can insert the values of the chosen profiles and glazing straight into the formula.

Frequently asked questions

How much heating energy does window replacement save?

That depends on the old and new U-value, the window area and the climate. As a rough formula: difference of the U-values × window area × degree days × 24 hours. Added to that are savings from tighter joints, which are hard to put a flat figure on.

Is it worth replacing double glazing from the 1990s?

In energy terms the step is smaller than from single glazing or early insulating glass. Comfort, airtightness, sound insulation or burglar protection often argue for replacement instead. Work it out with your specific U-values.

Why does consumption sometimes hardly fall after window replacement?

Often people ventilate differently after replacement, set a higher room temperature, or the new windows are poorly connected. Windows are also only one part of the building envelope; walls, roof and heating also determine consumption.

Sources

  1. energie-experten.org – Transmissionswärmeverluste: Berechnung und Beispiel(opens in a new tab)
  2. Wikipedia – Gradtagzahl (GTZ 20/15 nach VDI 2067 / DIN 4108-6)(opens in a new tab)
  3. Wikipedia – Fenster (U-Werte von Isolierglas bis Dreischeibenverglasung)(opens in a new tab)
  4. Umweltbundesamt – Wie lüfte ich richtig?(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: § 35c EStG Tax Bonus for New Windows in Germany
Energy & grants

§ 35c EStG Tax Bonus for New Windows in Germany

§ 35c EStG for new windows in Germany: deduct 20% of costs over three years from tax. Requirements, Uw values, certificate and comparison with BAFA.

7 minutes read

Cover image: Mould After Window Replacement: Causes and Airing
Energy & grants

Mould After Window Replacement: Causes and Airing

Avoid mould after window replacement: why airtight windows trap moisture, which humidity is ideal and how to ventilate properly, with a checklist.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy