Schüco AWS 90.SI+: Highly Insulated Aluminium Windows Up to Passivhaus Level
6 minutes read
Schüco AWS 90.SI+ is the 90 mm platform of Schüco aluminium windows, designed for very high insulation requirements up to Passivhaus level. According to Schüco, Passivhaus certification is achievable with a special profile combination; the AWS 90.SI+ optimized variant is listed with Uf 0.80 W/(m²K) at 117 mm face width and a PHI certificate. For ordinary renovations the system is often more than needed – for Passivhaus and high-efficiency new builds it is the first choice.
The platform in figures
| Feature | Schüco AWS 90.SI+ |
|---|---|
| Frame depth | 90 mm (outer frame, mullion, transom); sash 100 mm |
| Uf-value | AWS 90.SI+ optimized: 0.80 W/(m²K) at 117 mm face width |
| Example Uw | 0.80 W/(m²K) with Ug 0.6 W/(m²K) and plastic spacer (Schüco BIM data) |
| Passivhaus | certification with a special profile combination; optimized variant PHI-certified |
| Burglar resistance | RC1N, RC2, RC2N, RC3 under DIN EN 1627 (optimized) |
| Opening types | tilt-and-turn, side-hung and parallel tilt-and-slide sashes, accessible elements |
| Sash weight | concealed Schüco AvanTec hardware up to 250 kg; TipTronic sashes up to 160 kg |
| Opening angle | up to 180° with AvanTec SimplySmart |
Sources: Schüco product pages and Schüco BIM data (as of September 2026). Schüco does not publish values for glass thickness and sound insulation consistently on its freely accessible pages; dealers quote glass thicknesses up to 68 mm. Have these values confirmed for the specific design.
Why 90 mm insulates better
With aluminium windows, the insulation zone between the outer and inner shell decides thermal performance. More frame depth means a wider insulation zone with larger insulation bars and more room for insulating inserts. That lowers the heat flow through the frame and leaves space for thick triple glazing. At 90 mm, the frame can also be integrated better into the insulation plane of an external wall.
Aluminium needs no reinforcement the way uPVC does – the profiles are self-supporting. That is why AWS 90 also allows very large sashes, as the 250 kg hardware limit shows.
Passivhaus: what certification requires
The Passivhaus Institut in Darmstadt certifies windows for the cool-temperate climate if the component's U-value is at most 0.80 W/(m²K) and, as installed, at most 0.85 W/(m²K), calculated with Ug 0.70 W/(m²K). The PHI also awards efficiency classes (phA, phB, phC), which rate the heat losses through the opaque frame share. A dealer lists AWS 90.SI+ in class phC; if in doubt, check the current PHI certificate for the specific profile combination.
Important in practice: the certification applies to one particular profile combination. Anyone who needs a certified Passivhaus window must order exactly that combination. More on the subject in the article Passivhaus windows.
AvanTec and TipTronic: hardware and comfort
For AWS 90, Schüco offers the concealed AvanTec hardware, which carries sash weights up to 250 kg and, with SimplySmart, allows opening angles up to 180°. Concealed hinges are not visible from inside and underline the clean look. For motorised windows, Schüco lists TipTronic with sash weights up to 160 kg – interesting for hard-to-reach rooflights or smart-home solutions. You can read more about hardware technology in the article Concealed hardware.
Who is AWS 90.SI+ worthwhile for?
Passivhaus and high-efficiency homes
AWS 90 is the obvious choice here. The certified profile combination makes the proof easier, and the large glazed areas of modern architecture can be realised with low heat loss.
Large glazing
If floor-to-ceiling windows with heavy triple glazing are planned, the 250 kg hardware load and the stiffness of the aluminium profiles pay off.
High-quality renovation
In renovation, German BEG funding requires Uw ≤ 0.95 W/(m²K) at a basic funding rate of 15%; according to BAFA, the 5% iSFP bonus applies only from €30,000 of eligible minimum investment for one residential unit (as of September 2026). AWS 90 clearly exceeds this requirement. Whether the extra cost over AWS 75.SI+ is worthwhile depends on your overall concept – for instance, whether the façade and heating are also being brought to a very high standard. These are German rules; in the UK or elsewhere, check the local requirements and schemes.
Surfaces and two-tone colours
Like all aluminium systems, AWS 90.SI+ is powder-coated or anodised. Because the outer and inner shells are separated by the insulation zone, the two sides can be finished differently – for example a dark grey outside to match the façade and white inside. Dark colours are unproblematic with aluminium, because the profiles need no steel reinforcement and do not deform with heat the way PVC does.
Installation in the insulation plane
In a Passivhaus or high-efficiency home, the window ideally sits in the plane of the external insulation. Face-fixed installation with brackets or installation frames is often chosen for this. The outer frame is partly over-insulated on the outside to reduce thermal-bridge loss at the connection. Inside, an airtight connection tape ensures tightness; outside, a driving-rain-tight, vapour-permeable layer. At a sash weight of 250 kg in particular, load transfer via brackets and load-bearing packers must be planned correctly from a structural point of view.
Limits and planning notes
- Reveal depth: a 90 mm frame plus a 100 mm sash need space. In older, narrow walls installation can become complex.
- Connection details: highly insulating windows only realise their potential with low-thermal-bridge installation, ideally in the insulation plane.
- Weight: heavy sashes demand sound fixing substrates and careful load transfer.
- Cost: the system and the matching glazing sit in the upper price segment for aluminium windows.
Typical questions from planning
Architects often ask whether AWS 90 also makes sense with double glazing. Technically it is possible, but then the system wastes its potential: the Uw-value is dominated by the glass. Another frequent question concerns motorised windows. With TipTronic, sashes can be opened and closed automatically – for night ventilation or hard-to-reach rooflights, for example.
The question of face width also comes up often: Schüco states the Uf-value of the optimized variant for a 117 mm face width; according to the BIM data, the outer-frame views are 84 mm at the sides and top and 109 mm at the bottom, and 104 mm for mullion and transom. Slimmer or wider combinations change the Uf-value. And finally: a Passivhaus certificate and funding are two different proofs – for the BEG, the calculated Uw-value of each window counts; for Passivhaus, the certified combination.
AWS 90 compared
You will find the direct comparison with the 75 mm system – insulation values, frame depths and typical areas of use – in the article Schüco AWS 75 vs AWS 90. If you are weighing aluminium against uPVC in general, the arguments are in the article uPVC or aluminium.
Checklist for your AWS 90 project
- Set the goal: is a Passivhaus certificate required, or "just" a very good Uw?
- Have the profile combination named to which Uf, Uw and, where relevant, the PHI certificate apply.
- Check the reveal depth and agree the installation position with the designer.
- Choose the hardware: visible or concealed (AvanTec), manual or motorised (TipTronic).
- Decide the security class: RC 2 or RC 3 depending on the risk level.
- Have glass weight and sash dimensions approved by the window maker.
At AluKun you configure aluminium windows in the configurator. For Passivhaus projects, send us your planning documents through the contact form – we will clarify the suitable design.
Frequently asked questions
Is Schüco AWS 90.SI+ a certified Passivhaus window?
Schüco states that Passivhaus certification is achievable with a special profile combination. The AWS 90.SI+ optimized variant is listed as a Passivhaus Institut (PHI) Darmstadt certified Passivhaus window.
What Uf-value does Schüco AWS 90.SI+ have?
For AWS 90.SI+ optimized, Schüco quotes Uf 0.80 W/(m²K) at 117 mm face width. Values differ with profile combination and insulation zone, so the Uf-value should be stated for the combination actually offered.
How deep is the AWS 90 profile?
Outer frame, mullion and transom have 90 mm frame depth; according to Schüco data the sash frame has 100 mm. The reveal must be able to take this depth plus the connection joint.
Do I need AWS 90 for BAFA funding?
Not necessarily. The German BEG requirement of Uw ≤ 0.95 W/(m²K) can also be met with AWS 75.SI+. AWS 90 offers more reserve and is intended for Passivhaus and very efficient new builds.
Sources
- Schüco – AWS 90.SI+ (Produktseite)(opens in a new tab)
- Schüco – AWS 90.SI+ optimized (Produktseite)(opens in a new tab)
- Schüco Window AWS 90.SI+ – BIMobject (Herstellerdaten)(opens in a new tab)
- Passipedia – Zertifizierungskriterien für Passivhaus geeignete transparente Bauteile(opens in a new tab)
- BAFA – BEG Einzelmaßnahmen Gebäudehülle(opens in a new tab)
- GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.