Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Schüco AWS 75.SI+: The Aluminium Window for New Build and Renovation in Detail

6 minutes read

Schüco AWS 75.SI+ is Schüco's standard highly insulated aluminium window system with 75 mm frame depth. According to Schüco documents, Uf-values from 0.92 W/(m²K), burglar resistance up to RC 3, sound insulation up to Rw 48 dB and sash weights up to 250 kg are possible. That makes the system suitable for new build and renovation – including projects with a funding target, provided the glazing and profile combination are right.

What the name stands for

  • AWS: Schüco aluminium window system
  • 75: frame depth of the outer frame in millimetres
  • SI: "Super Insulated", the highly insulated version
  • +: the further-developed generation of the system

Schüco itself describes AWS 75.SI+ as its standard window system for 75 mm frame depth with "excellent thermal insulation".

Technical data at a glance

Feature Schüco AWS 75.SI+
Frame depth of outer frame 75 mm
Uf-value from 0.92 W/(m²K); at 117 mm face width 1.2 (PT) or 1.3 W/(m²K) (PA)
Example Uw 0.90 W/(m²K) (PT) or 0.93 W/(m²K) (PA) with Ug 0.6 W/(m²K)
Glazing fixed light 19–55 mm, sash 19–65 mm
Seal large-volume centre seal
Thermal insulation foamed insulation bars made of Polythermid (PT) or polyamide (PA)
Burglar resistance up to RC 3 under DIN EN 1627
Sound insulation up to Rw 48 dB
Sash weight hardware up to 250 kg

Sources: Schüco product page, Schüco BIM data and Schüco system documents (as of September 2026). Earlier Schüco system documents for the AWS 75.SI platform also quote air permeability class 4, driving-rain tightness 9A and wind load C5/B5.

How an aluminium window insulates

Aluminium conducts heat very well. For an aluminium window to achieve good insulation values nonetheless, the profile is split into an outer and an inner shell joined by plastic insulation bars – the thermal break. In AWS 75.SI+ these bars are, according to Schüco, foamed and made of Polythermid (PT) or polyamide (PA). The choice of bar material measurably changes the Uf-value, as the table shows. The principle is explained in the article Aluminium windows: thermal break explained.

There is also the large-volume centre seal: it closes off the rebate space between the outer and inner shell and so reduces heat loss through air movement.

Schüco states the Uf-value for a face width of 117 mm – the sum of outer frame and sash as seen from the front. Slimmer combinations tend to have different Uf-values, because the ratio between the insulating zone and the aluminium share changes. When you compare quotes, always ask which profile combination the Uf-value applies to. More in the article Uf-value of the frame.

Use in new build

In new build, AWS 75.SI+ plays to its strengths:

  • Large formats: hardware up to 250 kg allows large sashes with thick triple glazing.
  • Slim sightlines: aluminium is stiffer than PVC and needs no steel reinforcement. Slimmer profiles are therefore possible at the same size.
  • Façade look: powder coating in RAL colours or anodising – aluminium is coated or coloured through, not laminated with foil.
  • Security: burglar resistance up to RC 3 is possible with the system.

Use in renovation

With 75 mm frame depth, AWS 75.SI+ also fits many existing reveals. When replacing windows in residential buildings in Germany, the GEG requires Uw ≤ 1.3 W/(m²K), and the BEG individual-measure funding requires Uw ≤ 0.95 W/(m²K). The basic funding rate is 15%; according to BAFA, the 5% iSFP bonus applies only from €30,000 of eligible minimum investment for one residential unit (as of September 2026). These are German rules; in the UK or elsewhere, check the local thermal limits and funding schemes.

The Schüco example with Uw 0.90 W/(m²K) shows that the funding threshold is reachable. With PA bars and smaller formats, though, the margin shrinks. Funding stands or falls with the proof for each individual window.

Which variants exist

On the AWS 75 platform, Schüco lists further versions, such as AWS 75 BS.HI+ and AWS 75 BS.SI+ with a block sash, and WoodDesign variants with a timber look inside. These differ in appearance and performance figures. If particularly slim sashes matter to you, the BS variants are worth a look; for maximum insulation, the SI version is the benchmark within the 75 mm platform.

Surfaces: powder coating and anodising

A great advantage of aluminium is the surface. The profiles are powder-coated or anodised, not covered with foil. Powder coatings are available in almost all RAL colours and in textured or fine-textured finishes; anodising produces a metallic, very hard oxide layer. Thanks to the thermal break, the outer and inner shells can be finished differently, for example anthracite grey outside and white inside. Clean water and a mild cleaning agent are generally enough for care; abrasive products should be avoided.

Elements and opening types

Based on AWS 75.SI+, tilt-and-turn, side-hung and bottom-hung (tilt-only) sashes can be built, as can fixed glazing and French doors. According to the Schüco data sheet, inward- and outward-opening variants exist. For low-threshold transitions and large sliding elements, Schüco offers its own door and sliding systems that are visually matched to the AWS windows. So plan windows, balcony door and, where relevant, lift-and-slide door from one system family if possible, so that views and colours match.

AWS 75.SI+ or AWS 90 instead?

If you need Passivhaus level or maximum reserve on the Uw-value, you should consider the 90 mm system. The article Schüco AWS 75 vs AWS 90 compares the differences, areas of use and performance figures. As a rule: AWS 75.SI+ covers the requirements of most residential buildings, while AWS 90 is the choice for particularly high efficiency targets.

Aluminium or uPVC?

Aluminium windows usually cost more to buy than uPVC windows with a comparable Uw-value, but they score with stiffness, slim sightlines, large formats and a very durable surface. Which material makes more sense for your project is shown in the article uPVC or aluminium.

Typical planning mistakes

  • Uf-value without a combination: a quote with "Uf 0.92" and no profile combination stated is not comparable.
  • Insulation bar overlooked: PA instead of PT can push the Uw-value just over the funding threshold.
  • Underestimated connection: aluminium windows are stiff and heavy; fixing and load transfer must suit the wall.
  • Roller shutter box not planned in: the lintel area is often a bigger thermal bridge than the frame.

A note on burglar resistance: RC 3 is a system possibility. For the class, hardware, handle, glass and fixing in the wall must be tested and installed together.

Checklist for your AWS 75 project

  1. Settle the target Uw: GEG (1.3) or funding (0.95).
  2. Decide the insulation bar: according to Schüco, PT gives the better Uf-value.
  3. Have the profile combination and face width stated in the quote.
  4. Check the glass thickness: sashes up to 65 mm, fixed lights up to 55 mm.
  5. Mind the sash weight: check large formats with thick glazing against the hardware load.
  6. Choose the security class: RC 2 or RC 3 depending on location.

At AluKun you put aluminium windows and doors together in the configurator. For larger projects or commercial enquiries, contact us through the contact form.

Frequently asked questions

What does SI stand for in Schüco AWS 75.SI+?

At Schüco, SI stands for "Super Insulated", meaning a highly insulated system. AWS is Schüco's designation for its aluminium window systems, and 75 is the frame depth in millimetres.

What Uf-value does Schüco AWS 75.SI+ have?

Schüco documents quote Uf-values from 0.92 W/(m²K) for optimised combinations. At a face width of 117 mm, 1.2 W/(m²K) is stated with PT insulation bars and 1.3 W/(m²K) with PA bars.

Is Schüco AWS 75.SI+ eligible for funding?

For a window with Ug 0.6 W/(m²K), Schüco quotes a Uw of 0.90 W/(m²K) with PT bars. That can meet the German BEG requirement of Uw ≤ 0.95 W/(m²K); the calculation for your window sizes decides.

How heavy can the sashes be with AWS 75.SI+?

According to Schüco's system documents, hardware is available for sash weights of up to 250 kg. That makes the system suitable for large formats and thick glazing.

Sources

  1. Schüco – AWS 75.SI+ (Produktseite)(opens in a new tab)
  2. Schüco Window AWS 75.SI+ – BIMobject (Herstellerdaten)(opens in a new tab)
  3. Schüco Systemeigenschaften AWS 75.SI (PDF)(opens in a new tab)
  4. Schüco Fenster AWS 75.SI – Systemdokument (PDF)(opens in a new tab)
  5. GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
  6. BAFA – BEG Einzelmaßnahmen Gebäudehülle(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Schüco LivIng: uPVC Windows with 82 mm Depth
Window profiles

Schüco LivIng: uPVC Windows with 82 mm Depth

Schüco LivIng 82 explained: 7 chambers, AS or MD seal, Uf up to 0.96 W/(m²K), Classic, Rondo and Viva sashes – and who the system suits.

7 minutes read

Cover image: Schüco AWS 90.SI+: Highly Insulated Aluminium
Window profiles

Schüco AWS 90.SI+: Highly Insulated Aluminium

Schüco AWS 90.SI+ explained: 90 mm frame depth, Passivhaus certification, Uf 0.80 W/(m²K) (optimized), RC 3 and large sashes. Who is the system for?

6 minutes read

Cover image: Kömmerling Profiles Compared: 70, 76 or 88?
Window profiles

Kömmerling Profiles Compared: 70, 76 or 88?

Kömmerling 70, 76 or 88? Profile comparison with Uf-values, glass and seals – plus clear advice for older homes, renovation, new build and Passivhaus.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy