Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Schüco LivIng: The uPVC Window System with 82 mm Frame Depth in Detail

7 minutes read

Schüco LivIng is Schüco's uPVC window system with 82 mm frame depth and a 7-chamber profile. It is made as a rebate seal (82 AS) or centre seal (82 MD) and combined with different sash contours. According to the Schüco data sheet, LivIng Classic reaches Uf-values of up to 1.0 (AS) and 0.96 W/(m²K) (MD) – solid values for renovation with a funding target and for new build.

The platform: one frame depth, two sealing systems

Schüco describes LivIng 82 as a "twin system": rebate and centre seal are based on a common profile platform with 82 mm frame depth. For window makers that means fewer different parts; for clients, a uniform look if both variants are used in the same house.

On this platform Schüco offers several sash contours:

  • Classic: classic, slightly bevelled contour
  • Rondo: rounded sash contour for a softer appearance
  • Viva: its own design line with a reduced look
  • Panorama: sash contour for slimmer face widths

Schüco also lists systems such as LivIng Alu Inside and LivIng Perfect on its website. This article concentrates on the core variants 82 AS and 82 MD.

Technical data according to Schüco

Feature LivIng Classic 82 AS LivIng Classic 82 MD LivIng Viva 82 AS / MD
Frame depth 82 mm 82 mm 82 mm
Chambers 7 7 7
Seal levels 2 3 2 / 3
Uf-value up to 1.0 W/(m²K) up to 0.96 W/(m²K) up to 1.1 / 1.0 W/(m²K)
Glazing 16–54 mm 16–54 mm 28–52 mm
Sound insulation up to 47 dB up to 47 dB up to 47 dB
Burglar resistance RC1N, RC2N; RC2 with safety glass as AS RC1N, RC2N; safety glass optional

Source: Schüco data sheets LivIng Classic and LivIng Viva (as of September 2026). The values are best values for the configuration in question.

What distinguishes the variants

82 AS – rebate seal

Two continuous seals, one outside on the outer frame, one inside on the sash. That is the proven principle of most uPVC windows. With Uf up to 1.0 W/(m²K), LivIng AS is on the level of many centre-seal systems with less frame depth – that is an advantage of the 82 mm.

82 MD – centre seal

A third seal in the middle of the rebate separates the wet from the dry rebate zone. According to Schüco, the Uf-value falls to up to 0.96 W/(m²K). For funded projects with small window formats, where the frame share is high, that provides additional reserve. The difference between the sealing principles is explained in the article Centre seal vs rebate seal.

Sash contour: Classic, Rondo, Viva

The contour is first and foremost a design decision. It can have technical effects, though: for Viva Schüco quotes a glazing range of 28 to 52 mm instead of 16 to 54 mm for Classic, and somewhat different Uf-values. Choose the look first, then check whether the glazing you want fits in the range.

RC1N and RC2N: what the classes mean

The resistance classes under DIN EN 1627 describe how long a window withstands a burglary attempt with defined tools. In its data sheets Schüco states RC1N with 30 seconds and RC2N with 3 minutes of resistance time. The "N" means the class is achieved without burglar-resistant glazing. For RC2 without the addition, safety glass is also needed. When which class makes sense is described in the article RC2 or RC2 N.

Seals and long-term behaviour

Seals age: over the years they lose resilience, and the window becomes less tight. For LivIng Viva, Schüco states figures for the resilience of the seals – 96% after one year and 86% after 15 years – and compares them with benchmark values in its own documents. Such manufacturer statements rest on its own testing; but they show what matters: a seal should stay permanently elastic and be replaceable when needed. Ask the window maker whether the seals are pulled in and thus replaceable.

Installing the 82 mm frame

At 82 mm, LivIng lies between the classic 70/76 mm systems and the 88 mm profiles. In most existing reveals with an outer rebate, the system can be fitted without alterations. Still, plan for:

  • Internal window board: more frame depth can shorten the support for the internal window board.
  • Roller shutters: with surface-mounted roller shutters, the box must suit the frame depth.
  • Connection joint: airtight inside, driving-rain-tight and vapour-permeable outside – regardless of profile system.

Schüco LivIng and funding

For replacing windows in residential buildings in Germany, the GEG requires a Uw-value of at most 1.3 W/(m²K); for BAFA funding of individual measures Uw ≤ 0.95 W/(m²K) applies. The basic funding rate is 15%; according to BAFA the 5% iSFP bonus applies only from €30,000 of eligible minimum investment for one residential unit (as of September 2026). In the UK, check the Building Regulations thermal limits instead.

With Uf-values around 1.0 W/(m²K) and triple glazing with Ug 0.5 to 0.6 W/(m²K) and a warm-edge spacer, the funding threshold is reachable on usual living-room windows. What decides is the calculation for your dimensions – on very small windows the MD variant can tip the balance.

Sustainability and quality assurance

Schüco states that it manufactures LivIng at its Weißenfels plant and describes the PVC as fully recyclable. Schüco Polymer Technologies is also listed among the system suppliers with the RAL quality mark under RAL-GZ 716, which requires initial testing and ongoing independent monitoring. For surfaces, Schüco refers to its UnlimitedFinish programme with over 300 colours and woodgrain decors.

Schüco LivIng compared with other uPVC systems

System Frame depth Seal Uf up to (manufacturer figure)
Kömmerling 76 MD 76 mm Centre 1.0 W/(m²K)
REHAU Artevo 80 mm Centre 0.81 W/(m²K) (with LowE)
Schüco LivIng Classic 82 MD 82 mm Centre 0.96 W/(m²K)
Kömmerling 88 MD 88 mm Centre 0.93–0.98 W/(m²K)

The table shows that frame depth alone does not explain the Uf-values. A detailed comparison is in the uPVC window profile comparison.

Who is Schüco LivIng suited to?

  • Renovation with funding: 82 MD offers solid reserve for Uw ≤ 0.95 W/(m²K).
  • New build: the 82 mm frame depth suits insulated external walls well.
  • Design-oriented projects: the Rondo and Viva sash contours and the wide colour range allow an individual façade.
  • Noise protection: up to 47 dB with suitable acoustic glazing.

The system is less ideal with extremely tight reveals – there a 70 or 76 mm profile can be easier to install.

Frequent questions from consultations

People often ask whether the 82 mm causes problems in an older building. As a rule not, as long as an outer rebate exists and the internal window board can be adapted. Also frequent: whether AS or MD is better for sound insulation. Schüco quotes up to 47 dB for both variants – sound insulation is controlled mainly by the glass, not by the seal variant.

Checklist before ordering

  1. AS or MD? With a funding target and small windows, rather MD.
  2. Choose the sash contour and check the associated glazing range.
  3. Have Uw calculated per window with your dimensions and chosen glazing.
  4. Decide security equipment: RC2N requires suitable hardware and a lockable handle.
  5. Decide colour or decor and ask about effects on reinforcement and lead time.

At AluKun you can put Schüco uPVC windows together in the configurator. The windows page offers an overview of all profile systems.

Frequently asked questions

What do AS and MD mean at Schüco LivIng?

AS stands for rebate seal with two seal levels, MD for centre seal with three seal levels. Schüco builds both variants on the same 82 mm platform.

What Uf-value does Schüco LivIng have?

According to the Schüco data sheet, LivIng Classic 82 AS reaches up to 1.0 W/(m²K) and 82 MD up to 0.96 W/(m²K). For the Viva sash variant Schüco quotes up to 1.1 (AS) and 1.0 W/(m²K) (MD).

Which glass thicknesses fit Schüco LivIng?

For LivIng Classic Schüco quotes 16 to 54 mm, for LivIng Viva 28 to 52 mm. That allows common triple, acoustic and safety glazing.

How burglar-resistant is Schüco LivIng?

Schüco quotes classes RC1N and RC2N for LivIng; with additional safety glass RC2 is achievable. The prerequisite is the corresponding hardware and handle equipment.

Sources

  1. Schüco – LivIng 82 (Verarbeiter-Produktseite)(opens in a new tab)
  2. Schüco LivIng Classic – Datenblatt (PDF)(opens in a new tab)
  3. Schüco LivIng Viva – Datenblatt (PDF)(opens in a new tab)
  4. Gütegemeinschaft Kunststoff-Fensterprofilsysteme – Profilsysteme mit RAL-Gütezeichen(opens in a new tab)
  5. GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
  6. BAFA – BEG Einzelmaßnahmen Gebäudehülle(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Kömmerling Profiles Compared: 70, 76 or 88?
Window profiles

Kömmerling Profiles Compared: 70, 76 or 88?

Kömmerling 70, 76 or 88? Profile comparison with Uf-values, glass and seals – plus clear advice for older homes, renovation, new build and Passivhaus.

6 minutes read

Cover image: Schüco AWS 75.SI+: Aluminium Windows Explained
Window profiles

Schüco AWS 75.SI+: Aluminium Windows Explained

Schüco AWS 75.SI+: 75 mm frame depth, Uf from 0.92 W/(m²K), centre seal, RC 3 and sash weights up to 250 kg. Use in new build and renovation explained.

6 minutes read

Cover image: Kömmerling 88: uPVC Profile for Passivhaus Needs
Window profiles

Kömmerling 88: uPVC Profile for Passivhaus Needs

Kömmerling 88 MD with 88 mm frame depth, 7 chambers and Uf from 0.77 W/(m²K): variants, Passivhaus versions, glass thicknesses and when the system pays off.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy