Passive House windows: criteria of the Passive House Institute and typical constructions
7 minutes read
A Passive House window achieves, in the cool-temperate climate of central Europe, a Uw of no more than 0.80 W/(m²K) at test size and no more than 0.85 W/(m²K) as installed. That takes triple-glazed thermal insulation glass, a thermally insulated edge seal, a specially insulated frame and installation with minimal thermal bridging. The criteria come from the Passive House Institute in Darmstadt, which tests windows as a "certified Passive House component". The values below apply to the cool-temperate climate zone as defined by that institute; readers in the UK or elsewhere should check the certificate for the climate zone of their site, and the funding references in this article are German.
The aim behind it is not only energy efficiency but comfort without radiators under the window.
Why the Passive House needs such demanding windows
In a Passive House, heating demand is reduced so far that conventional radiators under the windows can be dispensed with. For that to work, the window itself must not be a "cold radiator". The Passive House Institute therefore sets a comfort criterion: the mean inner surface temperature of the window on the winter design day must be no more than 4.2 K below the operative room temperature.
According to Passipedia, the inner surface of a Passive House window is still at about 17 °C even on cold nights in central Europe. This avoids both disturbing cold downdraughts and noticeable radiant heat loss, and you can sit comfortably right next to the window.
The criteria at a glance
| Criterion | Requirement (cool-temperate climate) |
|---|---|
| Uw at test size with reference glazing Ug 0.70 | ≤ 0.80 W/(m²K) |
| Uw installed, vertical | ≤ 0.85 W/(m²K) |
| Inclined components (45°), installed | ≤ 1.00 W/(m²K) |
| Horizontal components, installed | ≤ 1.10 W/(m²K) |
| Comfort | surface ≥ room temperature − 4.2 K |
| Energy balance of glazing | Ug − 1.6 W/(m²K) × g ≤ 0 |
The last row deserves an explanation: during the heating season, glazing should gain more solar energy than it loses. That is why the g-value also matters for a Passive House window. Passipedia gives typical g-values of around 0.5. What the g-value means exactly is explained in the article on the g-value of windows.
Efficiency classes phA to phD
In addition to the Uw, the Passive House Institute assesses how much heat is lost through the opaque parts of the window, that is, through the frame and the glass edge seal. This gives efficiency classes from phA (very good, slim and well-insulated frames) through phB down to lower classes. According to Passipedia, most certified windows fall into class phB. For designers, the class is a useful indication of how good a frame is in relation to its face width.
The four building blocks of a Passive House window
1. Triple-glazed thermal insulation glass. Two coated panes and an inert gas filling in the cavities. The examples in the certification documents lie at Ug values between about 0.5 and 0.75 W/(m²K).
2. Thermally insulated edge seal. A spacer made of plastic or stainless steel instead of aluminium reduces the thermal bridge at the glass edge. More in the article on the warm edge spacer.
3. Insulated frame. For uPVC windows these are deep multi-chamber profiles, in some cases with insulating inserts. Timber and timber-aluminium windows use insulated cores, and aluminium uses wide thermal break zones with insulation. Large frame depths help but are not an end in themselves: what matters is how the chambers and insulation zones are arranged in the profile.
4. Installation with minimal thermal bridging. The window sits in the insulation plane, and the frame is insulated over on the outside. Only then does a good Uw at test size become a good value in the building.
Installation: where the Passive House window wins or loses
The difference between 0.80 W/(m²K) at test size and 0.85 W/(m²K) installed shows how important the connection is. The installation thermal bridge depends on where the window sits in the wall and how far the insulation overlaps the frame.
- New build with external wall insulation system: the window is fitted in front of the masonry in the insulation plane, usually with brackets or angles. The insulation overlaps the outer frame on the outside.
- Timber frame construction: the window sits in the insulated wall plane; the connections are made airtight and windproof with sealing tapes.
- Renovation: if the facade is insulated, the window should move outwards into the future insulation plane. If it stays in the old reveal, a thermal bridge results.
The consequences of a wrong installation position are explained in the article on thermal bridges at the window connection.
Passive House windows and large glass areas
With large elements such as lift-and-slide doors or panoramic windows, the requirements are particularly demanding. The frame of a sliding door is more complex in construction than that of a casement, and the threshold must be both watertight and as low as possible. Certified systems exist for these types too; when choosing, it is worth checking the certificate for which opening type and which glazing the values apply to.
Large south-facing windows in a Passive House can be both a valuable heat source and an overheating risk. External solar shading such as external venetian blinds or roller shutters is therefore part of the planning. The differences are explained in the article on external venetian blinds or roller shutters.
Reading the certificate correctly
A certificate from the Passive House Institute states, among other things, the Uw value at test size, the installation Ψ values for typical wall constructions, the efficiency class and the temperature factors. Three questions matter:
- Does the value apply to the glazing you are actually ordering?
- Do the installation examples match your wall construction?
- Does the certificate apply to the opening type and size you want?
If you plan without a certificate, the values can also be calculated with an energy adviser and manufacturer data. That is sufficient for funding, but not for a certified Passive House.
Is a Passive House window worthwhile outside a Passive House?
The honest assessment: it depends on the building.
- New build as an efficiency house: very good windows are often economical here, because windows usually lose more heat per square metre than the well-insulated wall.
- Comprehensive renovation: if the facade and roof are also insulated to a high standard, Passive House windows fit the concept.
- Window replacement in an uninsulated wall: here the step from a Uw of 0.95 to 0.80 brings little in energy terms, while the reveal can become colder than the window. A good standard window with Uw ≤ 0.95 W/(m²K) already meets the requirements of the German BEG funding (status: September 2026).
For German funding, Passive House certification is not required; what counts are the Uw limits of the technical minimum requirements.
Putting cost and economics in context
Passive House windows are generally more expensive than windows that just meet the funding requirement of Uw 0.95 W/(m²K), because frame, glazing and installation are more elaborate. Whether the extra price pays off depends on the building: in a certified Passive House they are a prerequisite, in an efficiency house they can replace other measures, and in an existing building with an uninsulated wall they add little. Reliable price statements can only be made for specific sizes and systems. Compare quotations on the basis of the same dimensions, glazing and installation method.
Checklist for planning
- Clarify climate zone and building standard: is it to be a certified Passive House?
- Request the Passive House Institute certificate for the specific window system
- Have the installed Uw calculated, rather than comparing only test-size values
- Mind the g-value and orientation: south-facing windows gain solar energy
- Plan installation position and insulation overlap in detail
- Consider summer heat protection, for example with external solar shading
If you are planning very well insulating windows, compare profiles and glazing in the window range and ask about certificates and installation details for Passive House projects via the contact page.
Frequently asked questions
What U-value must a Passive House window have?
For the cool-temperate climate of central Europe, the Passive House Institute requires a Uw of no more than 0.80 W/(m²K) at test size with reference glazing and no more than 0.85 W/(m²K) as installed.
Why must Passive House windows insulate so well?
A Passive House largely does without conventional radiators under the window. The inner surface of the window therefore must not be more than 4.2 K below room temperature, so that no disturbing cold air and no noticeable radiant heat loss occur.
Can I use Passive House windows in an older building?
Yes. They only show their strength, however, when the wall and the connection keep pace. In an older building with an uninsulated wall, a very good window can even make the reveal the coldest spot. Installation position and insulation should therefore be planned together.
Is every triple-glazed window a Passive House window?
No. Triple glazing is a prerequisite, but frame, edge seal and installation must also meet the criteria. The designation as a certified Passive House component requires testing by the Passive House Institute.
Sources
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.