Corner glazing and frameless glass corners: how to plan a glass house corner safely and watertight
6 minutes read
Corner glazing opens a room to two sides and makes the corner of the house feel light. With a frameless glass corner, the visible corner post is also omitted: two glazed units meet directly and the joint is sealed. For this to work, the building's load path must be solved without a corner support, and the glass, edge seal and sealing must be designed for the particular stresses at the corner. Where this article refers to German standards or the German building acts, readers in the UK or elsewhere should check their local rules.
Three types of corner glazing
| Type | Construction | Look | Effort |
|---|---|---|---|
| Corner window with corner post | two windows joined by a corner or coupling profile | post visible | low |
| Frameless glass corner | two fixed glazed units, glass meets directly | almost postless | high |
| Corner lift-and-slide door | sliding sashes open towards the corner, corner becomes clear | no corner when open | very high |
Corner window with corner post
The simplest and cheapest solution. Two windows or fixed glazed units are joined by a corner profile. The post carries no building load but connects and stabilises the elements. This type is possible with most profile systems, including with opening sashes on both sides. What coupling profiles are used for is described in the article on frame extensions and coupling profiles.
Frameless glass corner
Here two insulating glass panes meet without a frame. So that the edge seal is not exposed to the weather and the corner stays insulated, special glass build-ups are used in which the outer pane projects beyond the edge seal. The joint between the panes is closed with a suitable sealant. The panes are held in the frame at top and bottom; at the corner itself there is no support.
Corner lift-and-slide door
For the maximum opening there are lift-and-slide installations that open around a corner. The manufacturer Josko, for example, offers this opening type for its lift-and-slide doors. When closed, two sliding sashes meet at the corner; when open, the corner is completely clear. Such installations are special constructions that not every system offers.
Structure: who carries the corner?
The most important planning issue is not the glass but the structure. A house corner normally carries floor and roof loads. If the corner support is omitted, the load has to be carried another way:
- A beam below or above the glass areas, which transfers the load to the nearest walls
- A cantilevered slab that projects beyond the corner
- A slender steel column that stands inside behind the corner or set back
The glass itself carries no building loads. That is why the deflection of the beam must remain small enough not to load the glazing. The structural engineer is responsible for the calculations. In existing buildings, converting a masonry corner into a glass corner is always an intervention in the load-bearing structure and may require approval. Clarify this with the building authority; this article does not replace legal or structural advice.
Glass: sizing and safety
The glass of a frameless glass corner is sized to DIN 18008. At the corner the lateral support is missing, so the pane is held on only three sides there. That affects the permissible size and the glass thickness. If the bottom edge is low and there is a drop, the requirements for fall-protection glazing under DIN 18008-4 also apply, which as a rule require laminated safety glass. More on weight and glass thickness in the article large glass areas.
Thermal insulation and condensation
Geometrically, a corner is a thermal bridge: a small interior surface faces a large exterior surface. With a glass corner, the edge seal of the panes also sits right at the coldest point. That can lead to low surface temperatures and condensation.
Countermeasures:
- Triple glazing with a good Ug value
- Warm edge: spacers that meet the criterion Σ(d·λ) ≤ 0.007 W/K significantly reduce heat loss at the glass edge and raise the surface temperature. Details in the article warm edge.
- Airtight connections: under section 13 GModG, the building envelope including joints must be permanently sealed against air leakage. Leaky joints at the corner let warm, moist room air flow in.
- Heating and ventilation: a radiator or underfloor heating near the corner and regular ventilation reduce the condensation risk.
When replacing windows in existing buildings in Germany, the values in Annex 7 of the Building Modernisation Act apply: a maximum of Uw 1.3 W/(m²K) for windows and Uw 1.6 W/(m²K) for door-windows with a sliding mechanism in residential buildings (status: September 2026).
Sealing and maintenance
The glass joint of a frameless glass corner is the most sensitive point. The sealant must be compatible with the edge seal of the insulating glass units; incompatibilities can damage the edge seal. Plan for:
- Proof of compatibility for sealant and insulating glass from the manufacturer
- Visual inspection of the joint at regular intervals
- Cleaning without aggressive agents that attack the sealant
Solar shading and privacy at the corner
A glass corner gets sun from two sides, in the morning and afternoon depending on orientation. External solar shading is harder to implement at a postless corner because two screens meet at the corner and guide rails become visible. Possible options are:
- Raffstores or roller shutters on both sides that run close together at the corner
- Zip screens with side guides
- Structural shading by a cantilevered slab or a canopy
- Solar control glass where no movable solution is possible outside
Plan the boxes for roller shutters or raffstores together with the beam so that they can be installed concealed. You can read more about avoiding overheating in the article summer heat protection.
For privacy: a glass corner on the ground floor facing the street gives a lot of view in. Internal pleated blinds with corner guides or deliberate planting help.
Costs and effort
A frameless glass corner is considerably more expensive than two windows with a corner post. Cost drivers are the special glass build-up, the structural design, the elaborate installation and the sealing. Added to that are often the costs of a beam or steelwork. With corner lift-and-slide installations the effort rises again, because hardware, tracks and corner locking are special solutions.
When a glass corner is not the best solution
Appealing as a postless corner is, in some cases a corner window with a slim post is the better choice: with a limited budget, when both sides are to have opening sashes, when the load-bearing structure in an existing building does not allow a beam, or when external solar shading is essential at the corner. In very exposed locations with high wind load, a post can also simplify the glass design. A slim aluminium corner profile often looks hardly less elegant and is considerably cheaper.
Checklist for your glass corner
- Decide the type: corner post, frameless glass corner or corner sliding installation
- Clarify the load path with the structural engineer
- Have glass sizing and fall protection confirmed by the manufacturer
- Choose triple glazing with a warm-edge spacer
- Plan airtight connections and sealing in detail
- In existing buildings: check whether approval is required
For corner windows with a post, configure the individual elements directly in the configurator. We plan frameless glass corners and corner sliding installations individually; get in touch via the contact form.
Frequently asked questions
What is a frameless glass corner?
With a frameless glass corner, two glazed units meet without a visible corner post. The joint between the panes is bonded or sealed so that the corner appears to consist almost entirely of glass.
Does corner glazing need a support?
If the corner post is omitted, the load from the floor or roof must be carried in another way, for example by a beam, a cantilever or a concealed column. The structural engineer must demonstrate this; the glass itself carries no building loads.
Are there lift-and-slide doors that open at the corner?
Yes, some manufacturers offer lift-and-slide installations that open around a corner. The corner then stays clear when open. Such installations are special constructions that need correspondingly more planning.
Is a glass corner more prone to misting than a normal window?
Geometrically, the corner is a thermal bridge because less interior surface faces more exterior surface. Triple glazing, a warm-edge spacer and good heating and ventilation can limit the condensation risk.
Sources
- JOSKO – Hebeschiebetüren (Öffnung über Eck)(opens in a new tab)
- BF-Merkblatt 004 – Warme Kante(opens in a new tab)
- BF-Merkblatt 019 – Leitfaden zur Glasbemessung nach DIN 18008(opens in a new tab)
- Anlage 7 GModG – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
- § 13 GModG – Dichtheit(opens in a new tab)
- Warme Kante – Wikipedia(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.