Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Frame Extensions and Coupling Profiles: What You Need Them for on a Window

6 minutes read

A frame extension on a window is an additional profile attached to the outer frame to adapt the window to a larger wall opening, to create room for a roller shutter or window sill, or on balcony doors to bridge the transition to the floor. Coupling profiles, by contrast, join several window or door elements into a larger unit. Both belong to the profile system and must be chosen to be sealed and structurally suitable.

Frame extension: what it is

Frame extensions are uPVC or aluminium profiles connected to the outer frame via a groove or push-fit connection. On uPVC windows, according to fensterblick, they consist, like the window profiles, of a multi-chamber system. Larger extensions contain their own reinforcement for stability.

Typical dimensions

Sizes depend on the profile system. Dealer data for uPVC systems:

Profile system Usual extensions
70 mm profile 15, 35, 60, 100 mm
82 mm profile 15, 35, 60 mm
Balcony and front doors also much larger extensions, e.g. for floor adjustment

Which dimensions are available for your system is set by the profile manufacturer.

When a frame extension makes sense

Adapting to the wall opening

In older homes new windows do not always fit the existing opening exactly – for instance because the old windows had unusual dimensions or the reveal is out of square. Instead of a special size with a wide connection area, an extension can bridge the difference cleanly.

Roller shutters

A classic use case according to fensterblick: on a uPVC window with a roller shutter, the frame is widened at the side so that strap winder or crank have comfortable room next to the window. At the top, an extension may be needed to keep an inspection cover of the roller shutter box accessible – on tilt-and-slide doors, for example, whose sash would otherwise block access.

Window sill

At the bottom, an extension ensures that external and internal window sills can be connected correctly. This job is often done by the window-sill connection profile – more in the article Window-sill connection profile.

Balcony and patio doors

On doors, extensions at the bottom make up the height difference between the structural floor and the finished floor build-up.

What to watch with extensions

  • Sealing joint: a seal is needed between frame and extension so that neither water nor air gets through.
  • Fixing: the extension itself must be fixable in the wall; for large dimensions with reinforcement.
  • Thermal bridge: every additional joint is a potential weak point. Large extensions can reduce the insulating effect at the connection.
  • Look: extensions enlarge the visible frame area. On façades with a slim look, adjust the window size instead.
  • Colour: on coloured windows, extensions must be ordered in the same decor.

Coupling profiles: joining several elements

Couplings are needed when a wall opening is larger than the maximum window size or when window and door are to be combined – a balcony door with a side window, or a front door with a sidelight. Fensterblick distinguishes four types:

Coupling type Function Use
H-coupling / tongue coupling push-fit connection with no structural function smaller elements
Structural coupling reinforced, usually with steel; carries loads large or tall elements
90° corner coupling right-angled connection corner windows, bays
Variable corner coupling freely adjustable angles bays, polygonal plans

Structural coupling

According to fensterblick, structural couplings additionally carry the forces acting on the lintel. They are set into floor and ceiling and screwed; the adjoining window and door elements also receive full frame reinforcement. For tall elements or exposed locations with high wind load, the structural coupling is mandatory.

Aluminium systems

With aluminium windows, structural mullions often take on this job. For AWS 75.SI, Schüco lists mullion profiles with face widths from 76 to 250 mm, and for AWS 90.SI+ corner and structural mullions as well as symmetrical and asymmetrical mullions. Large window bands are thus built as a mullion-transom construction from one system.

Coupling or mullion within the element?

Multi-part windows can be made in two ways:

  • One element with a mullion: outer frame all round, mullion and transom welded or inserted. Compact and airtight, but limited by maximum element size and transport.
  • Several elements with a coupling: each element made separately and joined on site. Larger overall dimensions possible, easier to transport, but more joints.

Which solution is better depends on size, transport route and structure. For large glazed fronts you should clarify this with the window maker; more on large formats in the article Large glass areas.

Couplings and thermal protection

Every coupling is an additional joint in a window band. In thermal terms, coupling profiles are therefore a weak point unless insulated and sealed. Structural couplings with a steel core also conduct heat. For the energy proof, the element is generally treated as the sum of the individual windows; the coupling itself should nevertheless be made carefully so that neither draughts nor condensation arise. For funded projects, ask how the coupling is taken into account in the Uw proof.

Extension or special size?

The question often arises whether to order a special size or a standard size with an extension. Rules of thumb:

  • Small differences (a few centimetres): a special size is usually the better solution – fewer joints, slimmer look.
  • Roller shutter operation or inspection opening: an extension makes sense because it creates room in a targeted way.
  • Large differences in renovation: extension or bricking-up, depending on the wall build-up.
  • Reordering individual windows: extensions help to match a new window to the look of existing elements.

Quality assurance

Additional profiles belong to the tested profile system. For uPVC systems with the RAL quality mark under RAL-GZ 716, quality assurance according to the Gütegemeinschaft Kunststoff-Fensterprofilsysteme (the German uPVC window profile quality association) also covers system components and their compatibility. Use only extensions and couplings from the respective system supplier, no third-party profiles.

Installation and sealing

Couplings and extensions must be connected airtight and driving-rain-tight like the window itself. The joints between element and coupling are closed with system seals or sealant. Installation follows the principle "tighter inside than outside"; more in the article RAL installation.

Common mistakes

  • Extension without a seal: water penetrates between frame and additional profile.
  • Push-fit coupling on large elements: without a structural coupling, tall window bands can deform under wind load.
  • Colour not ordered with it: a white extension on an anthracite window is immediately noticeable.
  • Inspection opening built over: without an upper extension, the roller shutter box is no longer accessible later.
  • Third-party profiles used: additional profiles from other manufacturers often do not fit the groove exactly and endanger airtightness and warranty.

Checklist

  1. Measure the wall opening exactly – only plan extensions when a standard or special size alone does not fit.
  2. Think of roller shutter and window sill: where are strap winder, inspection opening and window sill connected?
  3. Decide the coupling type: push-fit or structural coupling according to size and wind load.
  4. Order colour and decor of all additional profiles identically.
  5. Installation: have fixing and sealing of the additional profiles stated in the quote.
  6. Use original parts: only additional profiles from the respective system supplier.

In the AluKun configurator you can select extensions and couplings for your window. For complex elements with several couplings, send us a sketch through the contact form.

Frequently asked questions

What do you need a frame extension for?

To adapt the window frame to a larger wall opening, to create room for a roller shutter or window sill, or on balcony doors to bridge the transition to the floor. It is attached to the outer frame and belongs to the profile system.

What sizes do frame extensions come in?

That depends on the system. Dealer data quote around 15, 35, 60 and 100 mm for 70 mm profiles and 15, 35 and 60 mm for 82 mm profiles; for doors, larger extensions are also usual.

What is the difference between an H-coupling and a structural coupling?

H- or tongue couplings join smaller elements on the push-fit principle. Structural couplings are reinforced, usually with steel, and also carry loads down into floor and lintel – needed for large or tall elements.

Does a frame extension have to be sealed?

Yes. A sealing joint is needed between frame and extension so that no water or air gets through. The connection must be made to the system supplier's specifications.

Sources

  1. fensterblick – Rahmenverbreiterungen für Fenster und Haustüren(opens in a new tab)
  2. fensterblick – Kopplungen für Fenster und Türen aus Kunststoff(opens in a new tab)
  3. Schüco Systemeigenschaften AWS 75.SI (PDF, Pfostenprofile)(opens in a new tab)
  4. Schüco – AWS 90.SI+ (Produktseite, Eck- und Statikpfosten)(opens in a new tab)
  5. Gütegemeinschaft Kunststoff-Fensterprofilsysteme – Was ist Gütesicherung?(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Meeting-Stile Windows: Two Sashes, No Mullion
Window profiles

Meeting-Stile Windows: Two Sashes, No Mullion

Meeting-stile windows explained: active and passive sash, meeting stile, operation, pros and cons, airtightness, security and use on balcony doors.

7 minutes read

Cover image: Window Opening Types: Tilt and Turn, Fixed and More
Window profiles

Window Opening Types: Tilt and Turn, Fixed and More

Window opening types: tilt and turn, side-hung, tilt-only, meeting-stile, fixed glazing, sliding and pivot sashes – with pros, cons and tips for choosing.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy