Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Pergolas & planning rules

Controlling a Pergola with Smart Home: Radio, Sensors and Scenes for the Louvred Roof

6 minutes read

A pergola can be controlled with a smart home if its louvre drive communicates over a radio standard that a hub understands, such as io-homecontrol, RTS or Zigbee. App, voice assistant or sensors then open and close the louvres, switch lighting and heaters and retract screens in wind. What matters is to look for the right radio system when you order.

Pergola smart home: the building blocks

A connected louvred roof has four layers:

  1. Drive: The louvre motor, usually with an integrated radio receiver.
  2. Controls: Handheld transmitters and wall switches for direct operation.
  3. Sensors: Rain, wind, sun, temperature.
  4. Hub: Connects drive, sensors and other devices, provides the app and scenes and links voice assistants.

The first three layers also work without a hub. Only with the hub do you get a smart home in which the pergola works together with roller shutters, lighting or heating.

Radio standards: why the choice matters

Standard Communication Typical use
io-homecontrol Two-way, with feedback Sun protection, roller shutters, pergolas of various brands
RTS (Somfy) One-way, no position feedback Older and simple sun-protection systems
Zigbee 3.0 Radio network for lighting and sensors Lamps, sockets, sensors
Matter Interoperability standard over Wi-Fi and Thread Cross-brand smart-home devices

Somfy describes io-homecontrol as a secure radio technology with comprehensive feedback: you can see in the app whether the louvres are really closed. RTS, by contrast, transmits in one direction only and gives no position report. For a pergola you want to close remotely, for example in a thunderstorm while you are out, feedback is a real advantage.

Matter is a cross-manufacturer standard from the Connectivity Standards Alliance that runs on Wi-Fi and Thread and puts local control first. Whether your pergola's drive or hub supports Matter, you will need to ask the manufacturer concerned.

The hub: the TaHoma Switch as an example

As an example of a hub in the sun-protection field, Somfy lists for the TaHoma Switch:

  • support for io-homecontrol, RTS and Zigbee 3.0,
  • compatibility with Amazon Alexa, Google Assistant and Apple HomeKit,
  • up to 200 connected products,
  • scenarios: 40 manual, 20 time-controlled and 20 sensor-based scenarios,
  • partner integrations, including Philips Hue and Sonos.

According to the manufacturer, TaHoma can control not only pergolas but also roller shutters, awnings, lighting and heating. If you already use roller shutters with io-homecontrol, you can add the pergola to existing scenes this way. Background on roller shutter control is in Somfy io-homecontrol: smart control of roller shutters.

Sensors: automation that protects

On a pergola, sensors are not just convenience but protection:

  • Rain sensor: closes the louvres at the first rain, even if nobody is at home.
  • Wind sensor: brings the louvres into a safe position and retracts zip screens before gusts damage them.
  • Sun and temperature sensor: opens or closes the louvres depending on brightness and warmth.

For this, Somfy offers, among others, the Eolis wind sensor, sun and temperature sensors and a complete sun-wind-rain sensor package with io. How rain and wind sensors work on the pergola is explained in Motorised louvres: rain and wind sensors.

Important: set the thresholds to suit your location. A wind sensor that responds only at strong gusts protects a delicate screen too late.

Scenes that have proved their worth

  • "Rain": Louvres closed, screens stay down, heaters off.
  • "Summer midday": Louvres at shading position, screen on the west side half down.
  • "Evening": Louvres slightly open, LED at 40 %, heaters on when the temperature falls below a set value.
  • "Holiday": Louvres closed, screens retracted, all consumers off, sensors active.
  • "Winter": Louvres in the position recommended by the manufacturer, automation disabled in frost if the instructions say so.

Planning lighting in scenes is described in LED lighting in the louvred roof. For heaters, an automatic timed switch-off prevents units from accidentally running all night; see Heaters for a pergola.

Retrofitting: making an existing pergola smart

An already installed pergola can often be integrated into a smart home too. The route depends on the existing drive:

  • Drive with io-homecontrol or RTS: It can generally be paired directly with a suitable hub. With RTS, however, position feedback is missing.
  • Drive with its own radio system: Some manufacturers offer their own gateways or interfaces. Ask whether a connection to common platforms is provided.
  • Wired control: For wall switches without radio, a radio receiver or actuator can be retrofitted; this is a job for a qualified electrician and must be agreed with the drive manufacturer.
  • Retrofitting sensors: Wireless sensors can usually be added without new cables. What matters is a mounting location where rain and wind arrive undisturbed, not in the wind shadow of the house wall.

Somfy stresses that wireless radio systems make retrofitting in existing buildings easier and allow a step-by-step start. Begin with rain and wind protection, then add lighting and comfort scenes.

Everyday operation

Even the best automation is of little use if family and guests cannot operate the pergola. What has worked:

  • a fixed wall switch at the terrace door for the most important commands,
  • clearly named scenes in the app, such as "Rain" or "Evening",
  • a short written guide for guests and house-sitters,
  • in winter, a deliberate decision about which automations stay active.

Security and reliability

The German Federal Office for Information Security (BSI) calls the router a cornerstone of IT security at home because it connects all internet-enabled devices, expressly including building services used to control blinds or heating. For your pergola this means:

  • Change default passwords on the hub and app.
  • Install updates for hub and app promptly.
  • Keep the router up to date and securely configured.
  • Check which functions run locally and which need a cloud connection.
  • Keep the handheld transmitter within reach as a fallback.

Checklist before ordering

  1. Which smart-home systems are already in the house?
  2. Which radio standard does the pergola's drive use?
  3. Is there feedback on louvre position?
  4. Which sensors should be added, and where will they be mounted?
  5. Should lighting, screens and heaters be integrated?
  6. How will it be operated without internet?

Configure a smart pergola

In the configurator you choose the drive, sensors, LED and side elements for your louvred roof. All equipment variants of the bioclimatic pergola are described on the product page. For questions about compatibility with your existing system, a look at the drive's datasheet helps; or simply name the hub and devices already in your house when you enquire. That way it can be clarified before ordering whether louvres, lighting and sensors fit directly into your existing scenes.

Frequently asked questions

Can I control my pergola by app and voice assistant?

Yes, if the drive uses a radio standard that a smart-home hub understands. The Somfy TaHoma Switch hub, for example, supports io-homecontrol, RTS and Zigbee 3.0 and works with Amazon Alexa, Google Assistant and Apple HomeKit.

What is the difference between io-homecontrol and RTS?

According to Somfy, io-homecontrol is a two-way radio protocol with feedback on status and command execution. RTS transmits in one direction only and does not report the position back.

Which automations make sense for a louvred roof?

Rain and wind protection matter most: louvres close in rain, and screens retract in wind. Sun and temperature scenes, schedules and lighting scenes are common additions.

Does the pergola also work without internet?

Remote control and wall switches generally work directly by radio. Whether app, scenes and voice control run without internet depends on the hub concerned; ask the manufacturer.

Sources

  1. Somfy: TaHoma switch – Produktseite(opens in a new tab)
  2. Somfy: Technologien und Protokolle (io-homecontrol, RTS)(opens in a new tab)
  3. Somfy: Sensoren(opens in a new tab)
  4. Somfy: Pergola-Automatisierung(opens in a new tab)
  5. Connectivity Standards Alliance: Matter(opens in a new tab)
  6. BSI: Internet der Dinge und Smart Home(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Pergola Installation: From Survey to Handover
Pergolas & planning rules

Pergola Installation: From Survey to Handover

Pergola installation step by step: survey, permit, foundations, wall connection, assembly, electrics and handover, with a checklist for homeowners.

7 minutes read

Cover image: Pergola Insurance: Cover Storm, Hail and Snow Damage
Pergolas & planning rules

Pergola Insurance: Cover Storm, Hail and Snow Damage

Insuring a pergola: when buildings or contents insurance pays, why snow pressure is a natural-hazard claim and what you should report to your insurer.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy