Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Arched Windows and Special Shapes: Arch Types, Opening and Measuring

6 minutes read

Arched windows and other special shapes characterise older buildings, Gründerzeit (Wilhelminian-era) façades and gables. Today they can be made to measure in uPVC, timber and aluminium, with tilt-and-turn function, triple glazing and glazing bars. What matters is an accurate survey of the arch and the question of which part of the window should open. An arched window is bespoke work, not a standard product, but with the right planning it is just as tight, secure and energy-efficient as a rectangular window.

The main arch shapes

Shape Description Typical use
Round arch Rectangular lower part with a semicircular or elliptical top Gründerzeit, villas, churches
Segmental arch A markedly flatter arch than the semicircle Older buildings, timber-framed houses, town houses
Shallow arch A very flat, barely noticeable curve Façades of older buildings
Basket-handle arch A depressed, "basket-like" curve Historic buildings, country houses
Pointed arch Pointed shape at the top Gothic Revival, ecclesiastical buildings

The descriptions follow the arch types as distinguished by the online retailer fensterblick.de, for example. In practice the terms sometimes overlap; the survey is what counts.

Other special shapes

  • Round windows: fensterblick.de makes round windows from 75 cm diameter, with usual sizes of 80 to 90 cm. They can be made with tilt or turn function and in two or four sashes, and often sit on the upper floor, in dormers or above front doors.
  • Trapezoid windows: symmetrical or asymmetrical, mainly in roof and gable areas. They are often fixed-glazed; tilt-and-turn sashes are possible if the construction allows.
  • Triangular windows: classic in the gable, usually fixed-glazed.
  • Raked windows: rectangular windows with a sloping top edge, for example under roof slopes.

An overview of opening types is in Window opening types: tilt-and-turn, tilt, double-leaf and fixed glazing.

Opening or fixed glazing?

With arched and special shapes, not every opening type makes technical sense. Proven solutions:

  1. Arch fixed, lower part opening: A transom separates the arch as a fixed fanlight; below it sits a normal tilt-and-turn sash. This is the most common and most robust variant.
  2. Whole arched sash opening: The sash follows the arch shape and can turn or tilt. It looks more elegant but needs suitable hardware and is more laborious.
  3. Double sash with arch: Two sashes, often as a double-leaf window with a meeting stile, with a shared arched top, typical of Gründerzeit windows.
  4. Completely fixed: for high-level round or triangular windows that are only meant to bring in light.

For fixed panes, think about cleaning: a fixed fanlight on the second floor can only be cleaned from inside if it is reachable. Ventilation also plays a part: in rooms with only one arched window, at least one sash should be large enough for purge ventilation. And for windows that serve as an escape route, the clear opening must reach the minimum dimensions of the state building code.

Survey: why the arch is the difficulty

Rectangular windows are defined by width and height. With an arched window, further measurements are added:

  • Width of the opening,
  • Height to the springing line of the arch (side height),
  • Overall height to the crown,
  • from which the arch rise results.

The problem: historic arches are rarely exactly geometric. Masonry has settled, and arches are uneven or slightly distorted. Hence:

  • For irregular arches, make a template or measure the arch at several points.
  • In old buildings with many identical windows, measure each window individually; small differences are the rule.
  • Have the survey done if possible after removal of the old window, or by a specialist firm.
  • Photos from inside and outside with a folding rule held against the opening make agreement with the manufacturer easier.

General notes on measuring are in Measuring windows correctly.

Material, glazing bars and colour

Arched windows are available in uPVC, timber and aluminium. Some planning notes:

  • uPVC: The arch profiles are bent; depending on the profile system there are minimum radii. Very small, tight arches are not possible with every system.
  • Timber: traditional for listed buildings and historic façades, can be made individually, with maintenance effort.
  • Aluminium: for modern architecture with slim arches.
  • Glazing bars: Arched windows can be made with internal, applied or glass-dividing bars, in Gründerzeit windows often with a radiating division in the arch. More in Glazing bars.
  • Colour: Arches look particularly harmonious when frame, glazing bars and façade are colour-matched.

Energy and regulations

Special shapes must also meet the energy requirements when windows are replaced. In Germany, under Annex 7 of the Building Modernisation Act, a maximum of Uw 1.3 W/(m²K) applies to residential buildings (as of September 2026); readers elsewhere should check their local requirements. For listed buildings and in conservation areas, the heritage authority decides on shape, division and material, so clarify this before ordering. Notes on older buildings are in Window profiles for older buildings.

Sun protection and insect protection

With arched windows, roller shutters usually cover the rectangular part, and the arch stays free. fensterblick.de recommends roller shutters for blackout and thermal protection and names integrated insect screens as an option. For the arch itself there are special solutions, such as arch-shaped internal pleated blinds. Plan sun protection and windows together so that installation dimensions fit.

Installation in existing buildings: particularities of arches

Installing an arched window differs from a rectangular window mainly at the arch itself:

  • Connection joint: The joint between arched frame and masonry is rarely of even width. Sealing tapes and insulation must follow the course so that the connection is airtight and driving-rain-tight all round.
  • Fixing: In the arch area, fixing points are harder to set. The specialist firm plans them so that the frame does not deform.
  • Inner reveal: After installation, the reveal is made good with plaster or clad. On historic façades, stucco and surrounds outside should stay undamaged where possible.
  • Window sill: The window sill sits at the bottom as with a rectangular window; with round windows it is often omitted or made as a special part.

When converting to a rectangular shape makes sense

Sometimes people consider bricking up an arch and installing a rectangular standard window. That can be an option for secondary rooms or outbuildings. On street-facing façades of older buildings, however, it changes the appearance considerably and is generally not permitted under heritage protection or design by-laws. Daylight is also lost. Usually the made-to-fit arched window is the better solution.

Cost and time factors

Specific prices depend on the configuration. The main cost drivers:

  • shape and size of the arch,
  • opening arched sash instead of a fixed fanlight,
  • glazing bars in the arch,
  • material and colour,
  • survey and installation in an existing building.

Special shapes are made individually; expect a longer lead time than for rectangular windows.

Checklist for arched windows

  1. Determine the arch shape and clarify heritage requirements.
  2. Survey with side height, overall height and arch curve.
  3. Decide which part should open.
  4. Match glazing-bar division and colour.
  5. Plan sun and insect protection too.
  6. Include installation with arch connection and reveal work in the quote.
  7. Allow for the longer manufacturing time in the construction schedule.

Enquire about special shapes

Rectangular windows you configure directly in the configurator. For round arches and other special shapes, send us your dimensions and photos via the contact page, so that we can clarify which version is possible with the desired profile system.

Frequently asked questions

What arch shapes are there for windows?

Usual shapes are the round arch (semicircle), segmental or shallow arch (flat arch), basket-handle arch (a compound, depressed arch) and pointed arch. There are also special shapes such as round, trapezoid and triangular windows.

Can arched windows be opened?

Yes, many arched windows are available as turn or tilt-and-turn windows. Often the arched part is made as a fixed fanlight and the rectangular part as an opening sash; which combination is possible depends on shape, size and profile system.

How do you measure an arched window?

Besides width and overall height, the height to the springing line of the arch matters, as does the actual curve of the arch. Because arches in old buildings are rarely exactly geometric, a survey by a specialist firm or a template is advisable.

Are there roller shutters for arched windows?

For arched windows, roller shutters are often used that cover the rectangular part while the arch stays open. Special solutions exist for the arch itself; clarify the options before ordering.

Sources

  1. fensterblick.de: Rundbogenfenster – Bogenarten(opens in a new tab)
  2. fensterblick.de: Rundfenster(opens in a new tab)
  3. fensterblick.de: Trapezfenster(opens in a new tab)
  4. fensterblick.de: Fenstertypen und Sonderformen(opens in a new tab)
  5. Anlage 7 GModG – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Juliet Balcony at a Window: Rules and Solutions
Window profiles

Juliet Balcony at a Window: Rules and Solutions

Juliet balcony at a floor-to-ceiling window: parapet heights under German building codes, DIN 18008-4, glass or bar balustrades and what to plan for.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy