Window Opening Types: Tilt and Turn, Tilt-Only, Meeting-Stile and Fixed Glazing Compared
7 minutes read
The main window opening types are the tilt-and-turn sash (standard in housing), the plain side-hung or bottom-hung (tilt-only) sash, the double-sash meeting-stile window without a central mullion, and fixed glazing. Special forms such as pivot, top-hung and sliding sashes come on top. Which type suits depends on ventilation, cleaning, security, furniture in front of the window and budget.
The opening types at a glance
| Opening type | Function | Typical use |
|---|---|---|
| Tilt and turn | tilt and turn with one handle | living spaces, standard |
| Side-hung (turn only) | opens sideways only | French doors, escape route, simple windows |
| Tilt-only (bottom-hung) | tilts at the top only | fanlights, bathroom, cellar |
| Top-hung (outward) | hinged at the top, opens outwards at the bottom | special cases |
| Meeting-stile | two sashes without a fixed central mullion | balcony doors, older homes, wide windows |
| Fixed glazing | does not open | side panels, fanlights, panoramic areas |
| Sliding / lift-and-slide | slides sideways | large patio elements |
| Tilt-and-slide (PSK) | tilts and slides in parallel | medium-sized patio doors |
| Pivot / reversible | about a horizontal/vertical centre axis | roof and special windows |
Tilt and turn: the standard
The tilt-and-turn hardware allows three positions with one handle: closed (handle down), turn position (horizontal) and tilt position (up). Advantages:
- Ventilation in the tilt position, for a short time or when it rains, for example.
- Full opening for purge ventilation and for cleaning the outside from inside.
- Inexpensive and proven: tilt-and-turn hardware is available in all common profile systems.
Disadvantage: the open sash swings into the room. In front of windows with a desk, sink or radiator cover, that can be a nuisance.
Tilt-first
With some hardware the order is reversed: from the closed position the sash is first tilted and only then turned. This can offer additional security against unwanted full opening, in children's rooms for instance. Lockable handles that prevent turning are also available. More in the article Lockable window handles.
Incorrect-operation lock
Modern tilt-and-turn hardware prevents the sash from tilting and turning at the same time – a formerly common operating error in which the sash was left hanging on one hinge. Make sure the hardware has such a lock.
Side-hung and tilt-only sashes
A plain side-hung sash is simpler and somewhat cheaper but less suited to ventilating in rain. It makes sense for French doors with a meeting stile, for windows that serve as an escape route, or where tilting is expressly not wanted.
A plain tilt-only sash opens only at the top. It is ideal for high-level fanlights, cellar windows or small bathroom windows. Because it cannot be opened fully, the outside must be cleaned from outside or the window must be easy to reach. For fanlights above head height, rod or motor fanlight openers help.
Meeting-stile windows: two sashes without a central mullion
With a meeting-stile window, two sashes close directly against each other. One is the active sash with the handle; the other is the meeting-stile sash, whose locking is operated by a lever or edge bolt. Advantages are the free opening without a central mullion and a slimmer central section. The disadvantage is the fixed order of opening and closing. In detail in the article Meeting-stile windows.
Fixed glazing
Fixed glazing has no sash: the glass sits directly in the outer frame.
- Advantages: slimmer sightlines, more light, cheaper, very airtight.
- Disadvantages: no ventilation, cleaning from outside only.
Combinations are popular, such as a large fixed pane with a narrow tilt-and-turn sash for ventilation. For fixed glazing at ground level or in areas with a fall risk, safety glass may be required; that depends on the installation situation and the state building regulations. More on large glass areas in the article Panoramic windows.
Sliding and special openings
For large patio openings, sliding systems come into question: lift-and-slide doors (HST) for very large elements, tilt-and-slide doors (PSK) for medium sizes. For AWS 90.SI+, for example, Schüco lists tilt-and-turn, side-hung and parallel tilt-and-slide sashes as well as accessible elements. For French doors with a sliding or lifting mechanism, the German GEG sets its own maximum of Uw 1.6 W/(m²K) when replacing in residential buildings (as of September 2026). In the UK or elsewhere, check the thermal limits that apply to you. The differences are explained in the article Lift-and-slide door: construction and advantages.
State the opening direction correctly
For each sash you must specify which side the hinges sit on. In the German trade this is called "DIN left" or "DIN right"; the assignment depends on the viewpoint from which the window is seen. To avoid misunderstandings, we recommend:
- Decide whether you are viewing the window from inside.
- Note on which side the handle and on which side the hinges should be.
- Check the sketch in the order confirmation before you approve it.
Tip: the sash should open towards the wall, not into the room where it gets in the way when opened – and not against a wall projection that limits the opening angle.
Hardware and comfort
The opening type determines the hardware, and the hardware determines operating comfort. A few points often missing from quotes:
- Vent-gap ventilation: some tilt-and-turn hardware offers an additional position with an opening of only a few millimetres – for a minimal air change without large heat loss.
- Concealed hinges: the hinges sit in the rebate and are not visible from inside. That looks calmer and makes cleaning easier.
- Opening limiters: they prevent the sash from hitting the wall or a piece of furniture.
- Motor drive: electric tilt and turn drives are available for hard-to-reach fanlights or smart-home solutions.
Opening type by room
| Room | Recommendation |
|---|---|
| Living room | tilt and turn; combine large areas with fixed glazing |
| Bedroom | tilt and turn, possibly a lockable handle |
| Children's room | tilt and turn with a lockable handle or tilt-first |
| Kitchen | tilt and turn; with a worktop in front of the window, consider tilt-only or a fanlight opener |
| Bathroom | tilt and turn or tilt-only, obscure glass |
| Stairwell | tilt-only with fanlight opener, or fixed glazing |
| Cellar | tilt-only or tilt and turn |
| Balcony, patio | tilt-and-turn door, meeting-stile door, PSK or HST |
Ventilating properly
Whatever the opening type: leaving windows tilted in winter cools reveal and lintel, wastes heating energy and can lead to condensation. Opening fully for a short time several times a day exchanges the air more efficiently. Anyone who is away during the day or has refurbished to an airtight standard should have a ventilation concept checked.
Opening type and energy
The opening type affects the U-value only indirectly: more sashes mean more frame area and therefore tend to give a higher Uw. A large fixed light with a narrow tilt-and-turn sash is often better in energy terms than two equally large sashes. Anyone applying for funding should therefore include the division in the Uw calculation.
Checklist
- Clarify the function of each window: ventilation, cleaning, escape route, passage.
- Consider furniture in front of the window.
- Use fixed glazing where opening is not needed.
- Security: lockable handles in children's rooms and ground-floor rooms.
- State the hinge side unambiguously and check the sketch.
- Plan cleaning: fixed glazing and tilt-only sashes must be reachable.
In the AluKun configurator you choose the opening type and hinge side for each sash and see the layout as a sketch. You will find all window systems on the windows page.
Frequently asked questions
Which opening type is most common in Germany?
The tilt-and-turn sash. With one turn of the handle it can be tilted for ventilation or opened fully for cleaning and purge ventilation, which is why it is the standard in housing.
When does fixed glazing make sense?
When a window does not need to open, for example for fanlights, side panels or large panoramic areas. Fixed glazing is slimmer and cheaper but must be cleanable from outside.
How do I state the opening direction correctly?
State which side the hinges are on and define from which viewpoint you are describing it. The safest way is a sketch of the inside view with the hinges marked in the quote.
Is tilt ventilation energy-saving?
Leaving a window tilted in winter cools the reveal and wastes heating energy. Opening it fully for a short time (purge ventilation) exchanges the air faster and cools walls less.
Sources
- WERU Lexikon – Stulpfenster(opens in a new tab)
- Schüco – AWS 90.SI+ (Produktseite, Öffnungsarten)(opens in a new tab)
- ELVIAL – W59 SI² CE (Produktseite, Typologien)(opens in a new tab)
- GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
- Roto Fenster- und Türtechnologie(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.