Kömmerling Profiles Compared: Which System Suits Which House?
6 minutes read
In a Kömmerling profile comparison, the short answer is: 70 mm for tight reveals and ancillary rooms, 76 mm as the all-rounder for renovation, and 88 mm for new build, near-Passivhaus targets and maximum reserve on the Uw-value. The differences lie in frame depth, sealing system, Uf-value and glass thickness. Which system suits is decided by your building and your funding target – not by the highest number.
The three platforms at a glance
| Feature | Kömmerling 70 AD | Kömmerling 76 AD | Kömmerling 76 MD | Kömmerling 88 MD |
|---|---|---|---|---|
| Frame depth | 70 mm | 76 mm | 76 mm | 88 mm |
| Seal levels | 2 | 2 | 3 | 3 |
| Chambers | 5 | n/a | n/a | 7 |
| Uf up to | 1.2 W/(m²K) | 1.1 W/(m²K) | 1.0 W/(m²K) | 0.93–0.98 W/(m²K) |
| Glass thickness | 10–44 mm | 16–52 mm (up to 58 mm) | 4–56 / 26–60 mm | up to 60 mm |
| Sound insulation up to | n/a | 47 dB | 47 dB | 48 dB |
| RC 2 possible | n/a | yes | yes | yes |
All details according to Kömmerling product pages for the respective standard version (as of September 2026). "n/a" means the manufacturer gives no figure on the product page. AD = rebate seal, MD = centre seal.
Which requirement your window must meet
Before choosing a profile, the goal should be settled:
- Statutory minimum: when replacing windows in a residential building in Germany, the GEG requires Uw ≤ 1.3 W/(m²K) (Annex 7, as of September 2026). All three platforms achieve that with modern glazing. (In the UK, check the Building Regulations thermal limits instead.)
- BEG funding: for BAFA funding of individual measures in Germany, Uw ≤ 0.95 W/(m²K) applies. Basic funding rate 15%, iSFP bonus 5% according to BAFA only from €30,000 of eligible minimum investment for one residential unit (as of September 2026).
- Passivhaus: for certified windows in the Central European climate, the Passivhaus Institut requires U ≤ 0.80 W/(m²K) as a component. For this Kömmerling offers its own 88 mm versions.
Important: the Uf-value describes the frame only. The Uw-value of the whole window follows from Uf, the Ug-value of the glazing, the thermal-bridge loss at the glass edge (psi-value of the spacer) and the area proportions. A good profile with mediocre glass can perform worse than a simpler profile with excellent glass.
Recommendation by building type
Older building with a narrow reveal
Here the installation depth is often the limiting factor. Kömmerling 76 is usually the best compromise: markedly better insulation than 70 mm, only 6 mm more depth. If every millimetre is critical – with an inner rebate and an old internal window board that is to stay, for example – Kömmerling 70 can be the right choice.
Renovation with BAFA funding
Choose at least 76 MD with triple glazing and a warm-edge spacer. With many small windows (bathroom, WC, stairwell) with a high frame share, 88 MD offers more certainty of getting below 0.95.
New build and efficiency house
The reveal can be planned freely, and the windows shape the heating load for decades. Kömmerling 88 MD is the obvious platform here. For certified Passivhaus buildings the Passivhaus WA15/2 or proStratoTec versions come into consideration – details in the article Kömmerling 88.
Cellar, garage, outbuildings
In unheated rooms, tightness, robustness and price count. Kömmerling 70 or 76 AD are sufficient here.
Road noise
Sound insulation depends mainly on the glass. What matters is that the profile can take thick acoustic glass: 76 MD (semi-offset up to 60 mm) and 88 MD (up to 60 mm) offer more latitude here than 70 AD (up to 44 mm).
Decision matrix
| Your project | First choice | Alternative |
|---|---|---|
| Older building, tight reveal, no funding | 76 AD | 70 AD |
| Older building with funding | 76 MD | 88 MD |
| New build standard | 88 MD | 76 MD |
| Passivhaus | 88 Passivhaus version | – |
| Cellar/ancillary rooms | 70 AD | 76 AD |
| Noisy street side | 76 MD / 88 MD | – |
| Timber-window look wanted | K-VISION (76 mm platform) | Decorative foil on 76/88 |
Apartment blocks and rentals
Landlords and owners' associations look not only at insulation value but also at robustness and uniform spare parts. One platform for all flats – usually 76 MD – simplifies later maintenance, seal replacement and reorders. For stairwells and cellar accesses a simpler system can suffice, as long as the external appearance suits the façade.
Combining systems in the same house
It is entirely usual to mix systems – 70 mm in the cellar and 76 or 88 mm in the living area, for example. For the façade to look uniform, choose the same sash shape (offset or semi-offset), the same colour or decor and, as far as possible, similar face widths. Note that wall connections, roller shutter boxes and window-board connection profiles must suit the system in question.
Price factors between the platforms
Specific prices depend on size, opening type, colour, glass and hardware – so we quote no flat amounts here. The tendency is clear, though:
- Profile: more frame depth and a third seal mean more material and effort. 88 mm is the most elaborate platform.
- Glass: the deeper systems are usually combined with thicker triple glazing. That costs more than the profile's own price premium.
- Colour: decorative foils or aluminium shells cost extra on all platforms and can bring stricter reinforcement requirements.
- Funding: if a deeper system reliably reaches the funding value, the grant can partly offset the extra cost. Calculate both variants.
The article What do new windows cost? explains in more detail how window prices are made up.
Front door and windows from one family
Kömmerling offers front-door systems on both the 76 mm and the 88 mm platform – at 76 mm inward- and outward-opening, in some cases with an aluminium shell. If you renew windows and front door at the same time, you can match profile appearance, decor and sealing principle. For the 70 mm system, the manufacturer currently lists no front-door platform on its overview page.
Common wrong decisions
- 88 mm "because it is the best": without a funding target and with a tight reveal, the deeper profile causes extra cost and connection problems with no noticeable benefit.
- 70 mm for a funded project: the Uw proof can fail on small windows – and then the funding is gone.
- Looking only at the Uf-value: glazing, spacer and installation have at least as much influence on the result.
The individual systems are presented in detail in the articles Kömmerling 70 and Kömmerling 76.
How to read a quote with Kömmerling profiles
Many quotes just say "Kömmerling 76" or "Kömmerling 88". Ask specifically which version is meant: rebate or centre seal, standard or aluminium shell, offset or semi-offset sash. These details determine Uf-value, possible glass thickness and appearance. Equally important is the Uw-value stated: it should refer to your window size and the glazing offered, not just the standard test window of 1.23 × 1.48 m that manufacturers usually advertise with.
Your next step
- Set the target Uw (GEG, BEG or Passivhaus).
- Check reveal depth and rebate situation.
- Choose the platform using the matrix above.
- Have Uw-values stated for your specific dimensions.
- Decide colour, sash shape and security equipment.
In the AluKun configurator you choose the Kömmerling platform and see the effects on specification and price straight away. You will also find all profile systems on the windows page.
Frequently asked questions
What is the most important difference between Kömmerling 70, 76 and 88?
Frame depth and with it thermal protection: according to the manufacturer, 70 AD reaches Uf up to 1.2, 76 MD up to 1.0 and 88 MD 0.93 to 0.98 W/(m²K). There are also differences in sealing system and possible glass thickness.
Which Kömmerling profile is best for an older building?
Often Kömmerling 76, because it combines good insulation values with moderate frame depth. If the reveal is very tight, the 70 mm system may fit; with plenty of space and high ambitions, the 88 mm system.
Which Kömmerling profile do I need for BAFA funding?
A Uw of at most 0.95 W/(m²K) is required. 76 MD and 88 MD reach that with triple glazing in most cases; with 70 AD the reserve is small. BAFA funding applies in Germany.
Can I combine different Kömmerling systems in one house?
Yes, that is common, for example 70 mm in the cellar and 76 or 88 mm in living rooms. Make sure the external look is uniform in colour and sash shape.
Sources
- Kömmerling 70 Anschlagdichtung Standard – Produktseite(opens in a new tab)
- Kömmerling 76 Anschlagdichtung Standard – Produktseite(opens in a new tab)
- Kömmerling 76 Mitteldichtung Standard – Produktseite(opens in a new tab)
- Kömmerling 88 Standard – Produktseite(opens in a new tab)
- GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)
- BAFA – BEG Einzelmaßnahmen Gebäudehülle(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.