Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Kömmerling 76: Centre Seal or Rebate Seal – Which Variant Suits You?

6 minutes read

Kömmerling 76 comes with a rebate seal (AD) and with a centre seal (MD) – both with 76 mm frame depth. The MD variant has a third seal level and, according to the manufacturer, reaches Uf-values of up to 1.0 W/(m²K); the AD variant up to 1.1 W/(m²K). For most renovations with a funding target, 76 MD is the safer choice; 76 AD scores with a wider choice of variants on a tight budget and proven technology.

The Kömmerling 76 mm platform

Kömmerling describes the 76 mm systems as slim profiles for renovation and new build. Under the platform the manufacturer offers three groups:

  • Rebate seal: Standard, AluClip, AluClip Plus, AluClip Pro, AddOn, REGEL-air, ClimaTec Plus and K-VISION
  • Centre seal: Standard, AluClip, AluClip Plus, AluClip Pro, AluClip Zero, AddOn, ClimaTec and ClimaTec Plus
  • Front doors: inward- and outward-opening versions

The variants differ mainly in external appearance (for example the aluminium cover shells of the AluClip range) and in additional functions such as integrated ventilation (REGEL-air). The technical basis remains the 76 mm profile.

Kömmerling 76 AD and MD compared directly

Feature 76 AD Standard 76 MD Standard
Frame depth 76 mm 76 mm
Seal levels 2 (outer, inner) 3 (outer, centre, inner)
Uf-value up to 1.1 W/(m²K) up to 1.0 W/(m²K)
Glazing 16–52 mm, 76223 sash up to 58 mm 4–56 mm offset, 26–60 mm semi-offset
Sound insulation up to 47 dB up to 47 dB
Burglar resistance up to RC 2 possible up to RC 2 with equipment
Driving-rain tightness n/a up to class 9A
Air permeability n/a up to class 4

All details according to Kömmerling product pages (as of September 2026). For both variants Kömmerling optionally offers profiles made of CO₂-optimised, bio-attributed PVC with an RSB-certified supply chain.

What the centre seal actually brings

With the centre seal, an additional seal sits between outer frame and sash in the middle of the rebate. This creates two separate rebate zones: outside the area where water is drained away, inside a protected, dry space for the hardware.

Advantages

  • Better thermal insulation: the difference of 0.1 W/(m²K) in the Uf-value sounds small but is noticeable in the Uw-value on small windows with a high frame share.
  • Hardware in the dry zone: behind the centre seal the hardware is better protected.
  • More glazing latitude: the semi-offset MD sash takes up to 60 mm of glass – helpful for thick acoustic or safety build-ups.

When the rebate seal is enough

For living rooms without a funding target, for ancillary rooms, or if a specific AD variant such as K-VISION is wanted, 76 AD is a fully valid solution. For sound insulation, Kömmerling quotes the same maximum values of up to 47 dB for both variants – here the glass is what mainly decides.

How the two sealing principles work in general is explained in the article Centre seal vs rebate seal.

Special case K-VISION

K-VISION is a rebate-seal variant on the 76 mm platform with its own geometry: the manufacturer quotes 120 mm frame depth in the frame and 76 mm in the sash, a 5-chamber construction, Uf-values from 1.4 W/(m²K) in the standard version down to 1.0 W/(m²K), and glazing from 16 to 50 mm. Striking is the 15° bevelled overlap in the frame, which recalls traditional timber windows. K-VISION is therefore more a design decision than a question of insulation performance.

Sash shape: offset or semi-offset

With the MD variant you also choose the sash shape. With the offset sash, the sash stands visibly in front of the outer frame – the classic uPVC window view. With the semi-offset sash it sits partly within the frame, and the view looks flatter and calmer. Kömmerling quotes a glazing range of 4 to 56 mm for the offset MD sash and 26 to 60 mm for the semi-offset one.

In practice this means: if you plan thick acoustic or safety glass, the semi-offset sash gives you more room. If you retrofit individual windows in a house, you should match the sash shape of the existing windows so that the façade stays uniform.

Aluminium cover shells: AluClip and co.

With both AD and MD, Kömmerling offers variants with an aluminium cover shell (AluClip, AluClip Plus, AluClip Pro, and AluClip Zero in addition with MD). Outside you then see aluminium in a powder-coated or anodised look; inside the easy-care uPVC profile remains. The shell is a design decision: it allows an aluminium look on the façade without giving up the insulating properties of the uPVC core. With these variants, check the stated Uf-values separately, because the figures for the standard version do not automatically apply to every outer shell.

Integrated ventilation with REGEL-air

In the AD group, Kömmerling lists a variant with REGEL-air, a rebate ventilator. It provides a regulated minimum air change through the rebate with the window closed. This can matter when replacing windows if a ventilation concept under DIN 1946-6 shows that moisture protection is not ensured without user ventilation. More in the article Ventilation concept when replacing windows.

Funding and GEG: which variant suffices for what?

For replacing windows in residential buildings in Germany, the GEG requires a Uw-value of at most 1.3 W/(m²K); both variants achieve that easily. For BEG funding of individual measures, Uw of at most 0.95 W/(m²K) applies. The basic funding rate is 15%; according to BAFA, the 5% iSFP bonus applies only from €30,000 of eligible minimum investment for one residential unit (as of September 2026). In the UK, check the Building Regulations thermal limits instead.

With 76 MD, triple glazing (for example Ug 0.5 to 0.6 W/(m²K)) and a warm-edge spacer, the funding threshold is reachable in many cases. With 76 AD the reserve is smaller. With small bathroom windows or narrow sashes it can be missing. So have the Uw-value stated for each window individually. The funding application process is described in the article BAFA funding for windows 2026.

Decision guide: 76 AD or 76 MD?

Situation Recommendation
Renovation with BEG funding 76 MD
Street side with noise, thick acoustic glass 76 MD (semi-offset up to 60 mm glass)
Ancillary rooms, cellar, no funding target 76 AD
Timber-window look with bevelled contour K-VISION (AD)
New build with high efficiency requirements consider 76 MD, often 88 MD makes more sense

You will find the classification of all three Kömmerling platforms in the article Kömmerling 70, 76 or 88.

Checklist before ordering

  1. Decide the seal variant: MD for funding and noise protection, AD for simple requirements.
  2. Choose the sash shape: offset or semi-offset – this affects look and possible glass thickness.
  3. Request Uw per window if you are applying for funding.
  4. Clarify security equipment: RC 2 requires tested hardware, a lockable handle and safety glass.
  5. Consider colour and decor: exterior colours and aluminium shells can change figures and price.

At AluKun you configure Kömmerling windows directly in the window configurator. For trade businesses with several projects there is a B2B account with tiered terms – contact us through the contact form.

Frequently asked questions

What is the difference between Kömmerling 76 AD and 76 MD?

Both have 76 mm frame depth. 76 AD works with two seal levels and, according to the manufacturer, reaches Uf up to 1.1 W/(m²K); 76 MD has an additional centre seal and reaches Uf up to 1.0 W/(m²K).

Which glass thickness fits Kömmerling 76?

For 76 MD Standard, Kömmerling quotes 4 to 56 mm with the offset sash and 26 to 60 mm with the semi-offset sash. For 76 AD Standard, 16 to 52 mm applies, and up to 58 mm with the 76223 sash.

Is Kömmerling 76 burglar-resistant?

According to the manufacturer, both variants are possible up to resistance class RC 2 with suitable equipment. That requires tested hardware, a lockable handle and suitable safety glass.

Is Kömmerling 76 enough for BAFA funding?

With triple glazing and a warm-edge spacer, 76 mm systems – above all the MD variant – reach the required Uw-value of at most 0.95 W/(m²K) in many cases. What counts is the calculation for your specific window sizes. BAFA funding applies in Germany.

Sources

  1. Kömmerling 76 Mitteldichtung Standard – Produktseite(opens in a new tab)
  2. Kömmerling 76 Anschlagdichtung Standard – Produktseite(opens in a new tab)
  3. Kömmerling – 76-mm-Systeme(opens in a new tab)
  4. Kömmerling K-VISION – Produktseite(opens in a new tab)
  5. BAFA – BEG Einzelmaßnahmen Gebäudehülle(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Kömmerling 70: The 70 mm uPVC Profile Explained
Window profiles

Kömmerling 70: The 70 mm uPVC Profile Explained

Kömmerling 70 in review: 70 mm frame depth, 5 chambers, rebate seal and Uf up to 1.2 W/(m²K). Who the profile suits and where its limits lie.

6 minutes read

Cover image: Kömmerling 88: uPVC Profile for Passivhaus Needs
Window profiles

Kömmerling 88: uPVC Profile for Passivhaus Needs

Kömmerling 88 MD with 88 mm frame depth, 7 chambers and Uf from 0.77 W/(m²K): variants, Passivhaus versions, glass thicknesses and when the system pays off.

7 minutes read

Cover image: uPVC Window Profiles Compared: Depth & Insulation
Window profiles

uPVC Window Profiles Compared: Depth & Insulation

uPVC window profiles compared: what frame depth, chambers, seal levels and Uf-value tell you – with manufacturer data for Kömmerling, Schüco and Rehau.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy