Kömmerling 88: The 88 mm Centre-Seal System for Near-Passivhaus Requirements
7 minutes read
Kömmerling 88 is Kömmerling's deepest uPVC window system: 88 mm frame depth, a 7-chamber build-up and a centre seal. According to the manufacturer, the standard version reaches Uf-values of 0.93 to 0.98 W/(m²K) and takes glazing up to 60 mm. For genuine Passivhaus projects there are separate certified versions – for ordinary renovations the system mainly makes sense when you want maximum reserve on the Uw-value.
Kömmerling 88 Standard: the key data
| Feature | Kömmerling 88 MD Standard |
|---|---|
| Frame depth | 88 mm |
| Chambers | 7-chamber centre-seal system |
| Uf-value | 0.93–0.98 W/(m²K), depending on version |
| Glazing | up to 60 mm |
| Sound insulation | up to 48 dB, depending on version |
| Burglar resistance | up to RC 2 with suitable equipment |
| Wind load | up to class C5/B5 |
| Driving-rain tightness | up to class 9A |
| Air permeability | up to class 4 |
Source: Kömmerling product page, as of September 2026. The classes for wind load, driving rain and air permeability are maximum values from tests under the European window standards; which class your window achieves depends on size, reinforcement and hardware.
The variants of the 88 platform
Under "Kömmerling 88 Mitteldichtung" (centre seal), Kömmerling lists several versions:
- Standard: the basic system in white or with decorative foil
- AluClip, AluClip Plus, AluClip Pro: with an aluminium cover shell for the exterior appearance
- AddOn: a variant with its own outer contour
- REGEL-air: with integrated rebate ventilation
- Passivhaus WA15/2: Passivhaus-suitable under ift guideline WA-15/2
- proStratoTec: certified by the Passivhaus Institut Dr. Feist (PHI)
There is also the Kömmerling 88 front door, so that windows and entrance door come from one system family.
Passivhaus versions in detail
Kömmerling 88 Passivhaus WA15/2
According to the manufacturer, this version uses a frame with Uf 0.95 W/(m²K) and a centrally arranged steel reinforcement. With 48 mm thermal insulating glazing (Ug 0.6 W/(m²K)), Kömmerling quotes a Uw of 0.79 W/(m²K), and 0.82 W/(m²K) as installed. The glazing range extends to 58 mm. The ift guideline WA-15/2 is a test procedure of the ift Rosenheim for the Passivhaus suitability of windows.
Kömmerling 88 proStratoTec
With proStratoTec, a glass-fibre reinforcement (Ultradur) is integrated into the profile. According to the manufacturer, this means steel reinforcement can be dispensed with, mainly in the sash, which benefits thermal insulation. Kömmerling quotes Uf-values of 0.77 to 0.89 W/(m²K) and states Passivhaus suitability under PHI Dr. Feist – also in colour. The maximum sash sizes depend on colour and bonding: with glass bonding in white up to 1,000 × 2,500 mm, in decor up to 1,000 × 2,350 mm; without bonding in white up to 1,000 × 2,200 mm, in decor up to 1,000 × 1,800 mm.
What "Passivhaus-suitable" means
For certified windows in a cool-temperate climate, the Passivhaus Institut requires a U-value of at most 0.80 W/(m²K) for the component and 0.85 W/(m²K) as installed, calculated with glazing of Ug 0.70 W/(m²K). A standard window does not reach these values automatically – hence the separate versions. More in the article Passivhaus windows.
Centre seal and chamber build-up
Kömmerling 88 is built exclusively as a centre-seal system. The third seal in the middle of the rebate separates the zone where water is drained from the dry hardware space. Together with the seven chambers and the greater frame depth, this gives the lower Uf-value compared with the 76 mm systems. According to profine's press release on the system's launch, the 88 platform is compatible with components of the 76 system – which simplifies the handling of accessories for window makers.
A detail often overlooked in selection: where the steel reinforcement lies affects the Uf-value. In the Passivhaus WA15/2 version it is, according to the manufacturer, arranged centrally; with proStratoTec an incorporated glass-fibre reinforcement takes over this role in the sash. The basics are explained in the article Steel reinforcement in the uPVC window.
Weight and hardware
Thick triple glazing up to 60 mm is heavy. With large sashes, hardware, hinges and glazing packers must be designed for the glass weight. The maximum sash sizes Kömmerling quotes for proStratoTec show that the limits differ with colour and glass bonding. So always have large formats checked for feasibility by the window maker before you commit to a size.
When Kömmerling 88 pays off
New build with a high efficiency standard
In a new build, reveal depth can be planned freely. The 88 mm system plays to its strengths here, especially with large window areas where every tenth of a watt in the Uw-value tells on the heating load.
Renovation with funding and reserve
German BEG funding requires Uw ≤ 0.95 W/(m²K); the basic funding rate is 15% (as of September 2026). With 88 MD you reach this value more reliably, even on smaller windows with a high frame share, than with shallower systems. If you are in the UK, check the Building Regulations thermal limits that apply to you instead.
Noise and security
The glazing range up to 60 mm allows thick acoustic and safety build-ups without giving up triple glazing.
When a shallower system makes more sense
- Tight reveal in an older building: 12 mm more frame depth than 76 mm can be missing at the internal window board and connection.
- Statutory requirement only: Uw ≤ 1.3 W/(m²K) is also achieved by 70 and 76 mm systems.
- Budget: deeper profiles, thicker glass and Passivhaus versions cost more – the added value must suit the building.
The article Frame depth in windows shows why more millimetres are not automatically the better choice.
Kömmerling 88 in a platform comparison
| System | Uf according to manufacturer | Glass up to | Typical use |
|---|---|---|---|
| Kömmerling 76 MD | up to 1.0 W/(m²K) | 56/60 mm | Renovation with funding |
| Kömmerling 88 MD Standard | 0.93–0.98 W/(m²K) | 60 mm | New build, renovation with reserve |
| Kömmerling 88 proStratoTec | 0.77–0.89 W/(m²K) | n/a | Passivhaus, also in colour |
You will find the full decision guide for all three platforms in the article Kömmerling 70, 76 or 88.
Installing highly insulating windows
A frame with a very low Uf-value is of little use if heat is lost at the connection to the wall. With Kömmerling 88 it is therefore worth planning the installation situation as carefully as the window:
- Installation position: in a new build with external insulation, the window ideally sits in the insulation plane, often with face-fixed installation on brackets.
- Over-insulation: if the outer frame is partly covered by insulation on the outside, thermal-bridge losses at the connection fall markedly – this is also why Passivhaus figures distinguish "installed" from "uninstalled".
- Airtightness: inside an airtight connection tape, outside a driving-rain-tight, vapour-permeable layer. The RAL guideline for window installation describes this principle.
- Window board: the system's own window-board connection profile belongs in the order so that the external window board can be connected watertight.
Checklist for your project
- Set the target Uw: statutory 1.3, funded 0.95, Passivhaus 0.80 (component) W/(m²K).
- Measure the reveal depth: is there enough room for 88 mm plus connection joint and internal window board?
- Choose the variant: standard, aluminium shell or certified Passivhaus version.
- Check the colour: decors can affect sash sizes and reinforcement.
- Plan the installation too: highly insulating windows need a low-thermal-bridge, airtight installation.
At AluKun you put Kömmerling windows together in the configurator. For Passivhaus projects or larger developments, contact us through the contact form – we will clarify the suitable version from your planning data.
Frequently asked questions
Is Kömmerling 88 a Passivhaus window?
The standard system is highly insulating but not automatically Passivhaus-certified. With "Passivhaus WA15/2" and "proStratoTec", Kömmerling offers its own versions classed as Passivhaus-suitable under the ift guideline WA-15/2 and by the Passivhaus Institut Dr. Feist respectively.
What Uf-value does Kömmerling 88 have?
According to the manufacturer, the standard version reaches Uf-values of 0.93 to 0.98 W/(m²K). The proStratoTec variant lies between 0.77 and 0.89 W/(m²K), depending on version.
How thick can the glazing be with Kömmerling 88?
For the standard version Kömmerling quotes glazing up to 60 mm thick. That also accommodates thick triple-glazed, acoustic and safety glass.
Is Kömmerling 88 worthwhile for renovating an older building?
If the reveal offers enough depth and a very low Uw-value is wanted, yes. With a tight rebate or purely statutory requirements, a 76 mm system is often the more economical choice.
Sources
- Kömmerling 88 Standard – Produktseite(opens in a new tab)
- Kömmerling 88 Passivhaus WA15/2 – Produktseite(opens in a new tab)
- Kömmerling 88 proStratoTec – Passivhausfenster zertifiziert nach PHI(opens in a new tab)
- Kömmerling – Pressemitteilung: Neues Profilsystem mit 88 mm Bautiefe(opens in a new tab)
- Passipedia – Zertifizierungskriterien für Passivhaus geeignete transparente Bauteile(opens in a new tab)
- BAFA – BEG Einzelmaßnahmen Gebäudehülle(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.