Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

Slim Face Widths: More Light and a Clean Look with Slim Window Profiles

7 minutes read

Slim window profiles enlarge the glass area for the same wall opening, let more daylight into the room and look lighter on the façade. What counts is the face width – the visible width of frame and sash – and, on double-sash windows, the central section. Aluminium is naturally slimmer; modern uPVC systems are catching up with new materials and sash contours. Limits are set by structure, hardware and insulation.

What face width is

Face width describes how wide frame and sash appear together in the front view. It is usually stated at three places:

  • At the sides and top: outer frame plus sash.
  • At the bottom: often somewhat wider, because the drip rail or threshold sits there.
  • Central section: on double-sash windows, the area made up of the central mullion (or meeting stile) and the two adjoining sash frames.

Face width should not be confused with frame depth, the depth of the frame in the wall. A deep profile can look slim and vice versa. Frame depth is explained in the article Frame depth in windows.

Why slim sightlines bring more light

The glass area of a window is the structural opening minus the frame area. Every centimetre less frame increases the glass area – and with it daylight and view. The effect is greatest on small windows, because the frame has a high share of the total area there. On double-sash windows the central section also counts: it divides the field of view and looks particularly present from inside the room.

Manufacturer data compared

Manufacturers do not publish face widths consistently, but a few examples show the range (as of September 2026):

System Figure according to manufacturer
REHAU Artevo central section (meeting stile) 118 mm (slim) instead of 156 mm (standard)
Elvial W59 SI² min. 94 mm frame/sash, 156 mm mullion
Schüco AWS 75.SI outer frame from 51 mm, mullion 76 to 250 mm, slim meeting-stile profiles available
Schüco AWS 90.SI+ outer frame at sides/top 84 mm, bottom 109 mm; mullion/transom 104 mm; sash 36 mm
Schüco LivIng 82 "Panorama" sash contour for slimmer sightlines

The figures are not directly comparable, because they refer partly to individual profiles and partly to combinations. When you get quotes, always ask for the total face width of your specific combination.

The conflicts of aims

Structure

A slim profile has less cross-section and therefore less stiffness. With uPVC windows, the reinforcement sits in the profile chamber; slimmer profiles leave less room for steel. New materials solve this: with the fibre-reinforced RAU-FIPRO X, REHAU quotes sash heights up to 2.60 m for Artevo even with the slim sash. Aluminium is stiff anyway and allows slim profiles even in large formats.

Hardware and glass weight

Heavy triple glazing needs hardware with sufficient load capacity and enough room in the rebate. Concealed hardware, where the hinges sit in the rebate instead of outside, supports a calm, slim look. More in the article Concealed hardware.

Insulation

A slimmer profile leaves less room for chambers or an insulation zone. The Uf-value can therefore come out somewhat worse. For the whole window, though, the Uw-value counts, which is calculated under DIN EN ISO 10077-1 from glass and frame area, their U-values and the glass-edge loss. Less frame area means more glass, usually with a better U-value – which can offset the disadvantage. The Passivhaus Institut explicitly takes this link into account: its efficiency classes for windows reward slim frames as well as good U- and psi-values.

Strategies for slim windows

Meeting stile instead of mullion

A double-sash window without a fixed central mullion – a meeting-stile window – has a slimmer central section and, when open, offers the full clear opening width. Details in the article Meeting-stile windows.

Fixed glazing instead of a sash

Fixed glass areas need no sash frame. The glass sits directly in the outer frame, and the view becomes much slimmer. Large fixed glazing combined with an openable sash is a proven solution for plenty of light.

Flush or semi-offset sashes

With offset sashes, the sash stands in front of the frame and forms a second plane. Flush or semi-offset contours look calmer and slimmer, even if the actual face width is similar.

Choose aluminium

If slim sightlines are the most important criterion, aluminium is often the obvious choice. Aluminium profiles need no steel reinforcement, so large sashes with narrow frames are also possible.

Over-insulate the frame

If the outer frame is partly covered on the outside by façade insulation or render, it looks narrower from outside. At the same time, over-insulation reduces thermal bridges at the connection. The visible face width inside is unaffected.

Slim profiles in older homes

Historic timber windows often have very delicate frames. When replacing windows in an older home, wide standard profiles quickly look clumsy and change the façade. Slim systems, meeting-stile solutions and a suitable division help preserve the character. More in the article Window profiles for period homes.

Worked example: how much glass do you gain?

A simplified example illustrates the effect. Assume a single-sash window with an outer size of 1,000 × 1,200 mm. If the all-round face width falls from 120 mm to 100 mm, the visible glass area grows from 760 × 960 mm (about 0.73 m²) to 800 × 1,000 mm (0.80 m²). That is about 10% more glass – without enlarging the window. On a window of 2,000 × 1,500 mm the relative gain is smaller, because the frame has a smaller share there anyway. The figures are a worked example, not manufacturer data; actual face widths differ by system and side.

Slim and still eligible for funding?

For German BAFA individual-measure funding, Uw ≤ 0.95 W/(m²K) applies (as of September 2026). Because the Uw-value takes the area shares into account, a slim profile with good glass can meet the requirement even if its Uf-value is somewhat worse than that of a wide profile. Have the proof calculated for your specific dimensions before you commit. In the UK or elsewhere, check the local thermal limits and schemes.

Effect on burglar and sound protection

Slim profiles can be made burglar-resistant and sound-insulating as long as the system is tested in the desired class. For AWS 90.SI+, Schüco quotes burglar resistance up to RC 3. What is decisive is tested hardware, glass and fixing – not profile width alone.

Checklist for slim windows

  1. Ask for the face width of the specific combination, including the central section.
  2. Double-sash? Consider a meeting stile instead of a mullion.
  3. Plan fixed glazing where opening is not needed.
  4. Weigh the material: aluminium for maximum slimness, uPVC with a slim contour for the budget.
  5. Compare the Uw-value, not just the Uf-value.
  6. Choose the hardware: concealed hinges support the clean look.
  7. Have maximum sash sizes confirmed by the window maker.

In the AluKun configurator you choose opening type, division and profile system and see how the layout affects your window. You will find an overview of the systems on the windows page.

Frequently asked questions

What is the face width of a window?

Face width is the visible width of outer frame and sash together, measured in the front view. With double-sash windows, the central section made up of mullion or meeting stile and both sashes is also considered.

How much more light do slim profiles bring?

That depends on the window size. On small windows every centimetre of frame makes up a large share of the area, on large windows less. Slim central sections are particularly noticeable on double-sash windows.

Do slim profiles insulate worse?

Not necessarily. A slimmer profile may have a slightly worse Uf-value but reduces the frame area. For the Uw-value of the whole window this can balance out or even be positive.

Are aluminium windows always slimmer than uPVC windows?

As a tendency yes, because aluminium is stiffer and needs no reinforcement. Modern uPVC systems with fibre reinforcement or slim sash contours have narrowed the gap, though.

Sources

  1. REHAU – Premium-Fenstersystem ARTEVO(opens in a new tab)
  2. Schüco – LivIng 82 (Verarbeiter-Produktseite)(opens in a new tab)
  3. Schüco Systemeigenschaften AWS 75.SI (PDF)(opens in a new tab)
  4. Schüco Window AWS 90.SI+ – BIMobject (Herstellerdaten)(opens in a new tab)
  5. ELVIAL – W59 SI² CE (Produktseite)(opens in a new tab)
  6. Passipedia – Zertifizierungskriterien für Passivhaus geeignete transparente Bauteile(opens in a new tab)
  7. Baunetz Wissen – U-Wert und Wärmedurchgangskoeffizient(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Window Opening Types: Tilt and Turn, Fixed and More
Window profiles

Window Opening Types: Tilt and Turn, Fixed and More

Window opening types: tilt and turn, side-hung, tilt-only, meeting-stile, fixed glazing, sliding and pivot sashes – with pros, cons and tips for choosing.

7 minutes read

Cover image: Anthracite Outside, White Inside: Choosing Windows
Window profiles

Anthracite Outside, White Inside: Choosing Windows

Windows in anthracite outside, white inside: look, engineering, heat build-up, surcharge and care – plus foil vs aluminium shell vs powder coating.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy