Retrofitting Burglar Protection to Windows: Add-On Locks, Security Devices and What Really Works
7 minutes read
If you want to retrofit burglar protection to windows, the best approach is to counter the typical method of attack: prising. For this, the German police recommend tested retrofit products to DIN 18104, either surface-mounted add-on locks (part 1) or security devices that sit in the rebate (part 2), combined with lockable window handles and protection on the hinge side. What matters is professional fitting into load-bearing material.
The standards, police advice and funding in this article are German. The mechanical principles are the same everywhere, but if you are outside Germany, please check which security standards and local crime-prevention advice apply to you.
How burglars open windows
The Polizeiliche Kriminalprävention describes prising as the most common method: a screwdriver or similar tool is placed between frame and sash, and the sash is forced out of its locking. Standard hardware with simple roller cams gives way quickly. Retrofits therefore achieve most when they:
- connect the sash firmly to the frame at several points,
- also secure the hinge side, where the sash could otherwise be pushed open,
- are screwed into load-bearing material, that is steel reinforcement, hardwood or masonry.
Retrofitting burglar protection: the options at a glance
| Measure | Standard/test | Effect | Notes |
|---|---|---|---|
| Surface-mounted additional lock | DIN 18104-1 | additionally connects sash and frame, often lockable | visible, check ease of use |
| Window bar lock | DIN 18104-1 | bar over the sash height, several locking points | good for larger sashes |
| Hinge-side protection | DIN 18104-1 | prevents prising on the hinge side | important with tilt function |
| Mushroom cams and security keeps | DIN 18104-2 | hook into the keep when levered | in the rebate, invisible, hardware must be suitable |
| Lockable window handle | test e.g. by torque | prevents the handle being turned after drilling | only useful in combination |
| Burglar-resistant glass | DIN EN 356, e.g. P4A | makes it harder to break through the pane | glass fixing must keep up |
In its technical minimum requirements for loan 159, KfW names exactly these product groups: surface-mounted window bar locks, hinge-side protection, lockable window handles and mushroom-cam locking to DIN 18104 part 1 or 2, as well as burglar-resistant glass to DIN EN 356 in class P4 or better with secured glass fixing. Burglar-resistant films are expressly not eligible there.
Surface-mounted additional security (DIN 18104-1)
Surface-mounted additional locks are the classic retrofit. They are fitted on the inside to sash and frame and connect the two mechanically. Advantages:
- can be retrofitted independently of the existing hardware,
- many models lockable,
- clearly visible, which can act as a deterrent.
The disadvantages are appearance and operation: each lock has to be unlocked individually when opening. For windows that are opened often, models with a push cylinder or automatic locking are more convenient.
Do not forget the hinge side
Many retrofits secure only the handle side. A burglar then simply starts on the hinge side. Hinge-side protection devices that engage when closing close this gap. On large windows, at least one device should be fitted on each of the handle side and hinge side; the exact number depends on sash size and manufacturer specifications.
Security devices in the rebate (DIN 18104-2)
Modern tilt-and-turn hardware can often be upgraded: the normal roller cams are swapped for mushroom cams, and the keeps in the frame for steel security keeps. When levered, the mushroom-shaped head hooks into the keep. This solution is invisible and changes nothing about operation. It requires a hardware system for which suitable parts are available, and fixing into the steel reinforcement. How the technology works is shown in the article Mushroom-cam locking.
Lockable handles
A lockable handle stops a burglar from operating the hardware from outside after drilling through the frame. On its own, it does not protect against prising. It makes most sense in combination with mushroom cams or additional locks, and for households with children. More in the article Lockable window handles.
Limits of retrofitting
- Weak frames: In old uPVC windows without sufficient steel reinforcement, or in soft timber, screws find no hold. Then even the best lock achieves little.
- Glazing: Retrofits secure the sash, not the pane. If someone breaks the pane, they can reach through. Burglar-resistant glass is only effective with a matching glass fixing.
- Basement windows, light wells, side doors: Often overlooked weak spots. See the article Basement windows.
- Roller shutters: Ordinary roller shutters can often be pushed up. An anti-lift device helps; see Roller shutters with anti-lift protection.
If the windows are old anyway, replacing them with tested burglar-resistant windows to DIN EN 1627 (RC2 or RC2 N) is usually the better solution. The differences are explained in the article Resistance classes RC1 to RC3.
Securing patio doors and tilted windows in particular
Patio and balcony doors are often at the rear of the house, which is hard to see, and are therefore popular entry points. The same retrofit principles apply to tilt-and-turn doors as to windows, but with larger sashes and therefore more locking points. With lift-slide doors, classic add-on locks often do not work; there are special devices against lifting out and pushing open. More in the article Sliding door burglar protection.
A tilted window offers hardly any resistance, because the locking does not engage in the tilt position, even with retrofitted security. The most effective measure is therefore a habit: close all windows when leaving the house, including upstairs if bins, garage roofs or trellises can serve as a climbing aid.
Professional fitting and advice
The police stress that retrofit products must be fitted professionally. The police advice centres offer free, manufacturer-neutral advice on site or at the advice centre; you will find addresses via k-einbruch.de. Have the installation confirmed in writing.
Financing and tax (as of September 2026)
- KfW grant 455-E: cannot be applied for.
- KfW loan 159 "Altersgerecht Umbauen" (age-appropriate conversion): finances retrofit systems to DIN 18104 and burglar-resistant glass with up to €50,000 per dwelling unit. Apply through your bank before signing a contract; work to be carried out by a specialist firm.
- Tradesperson bonus, § 35a EStG: 20 % of labour costs, a maximum tax reduction of €1,200 per year; it cannot be combined with subsidised-interest loans or grants for the same measure.
You can read details of the programmes in the article KfW funding for burglar protection. This article does not replace tax or funding advice.
Order: where to retrofit first?
Not every window is equally at risk. Start where burglars can work undisturbed and without tools:
- Ground-floor patio and balcony doors, especially on the garden side.
- Ground-level windows and basement windows that cannot be seen from the street.
- Windows above extensions, garage or carport roofs.
- Side entrance doors and doors between garage and house.
Windows on upper floors without a climbing aid usually have lower priority. The police advice helps you set this order for your house.
Checklist
- Record weak spots: ground floor, basement windows, patio doors, windows reachable over garage roofs.
- Use the free police advice.
- Check the frame material: is a load-bearing fixing possible?
- Secure handle and hinge sides, choose products to DIN 18104.
- Have the work done by a specialist firm and obtain written confirmation.
- For old windows, consider replacement with RC2 windows.
If you are planning new windows, you can order burglar-resistant features at the same time. In our windows overview and in the configurator you will find hardware and glass options for greater security.
Frequently asked questions
Which retrofit products do the German police recommend for windows?
The Polizeiliche Kriminalprävention (German police crime-prevention service) recommends tested burglar-resistant retrofit products to DIN 18104 in combination with lockable window handles. Protection on both the handle side and the hinge side is important, because burglars mostly prise windows open.
What is the difference between DIN 18104-1 and DIN 18104-2?
Part 1 covers surface-mounted retrofit products such as additional locks or bar locks, and part 2 covers products that sit in the rebate, such as burglar-resistant hardware parts. Both parts describe test requirements for retrofitting.
Is a lockable window handle enough?
Usually not on its own. A lockable handle mainly stops the handle being turned from outside after drilling. Against prising, you need sturdy locking points with mushroom cams and security keeps, or screwed-on additional locks.
Is there funding for retrofitted burglar protection?
In Germany, the KfW grant 455-E cannot be applied for. Retrofit systems to DIN 18104 can, however, be financed through KfW loan 159; for labour costs, the tradesperson bonus under § 35a EStG is an alternative (as of September 2026).
Sources
- Polizeiliche Kriminalprävention (K-Einbruch): Fenster sichern(opens in a new tab)
- KfW: Anlage zum Merkblatt Altersgerecht Umbauen – Kredit (159), technische Mindestanforderungen(opens in a new tab)
- KfW: Vor Einbruch schützen mit staatlicher Förderung(opens in a new tab)
- § 35a EStG – Steuerermäßigung für Handwerkerleistungen(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.