Saving Heating Costs with New Windows: A Worked Example Step by Step
7 minutes read
You can estimate how much you will save on heating costs with new windows using a simple formula: U-value difference × window area × heating degree hours = heat saved per year. The Verbraucherzentrale (the German consumer advice organisation) uses around 65 kilokelvin hours per year for this. Multiply the result by your energy price and divide by the efficiency of your heating, and you get a realistic order of magnitude: no more, but no less either.
This article shows the calculation step by step using a worked example with assumed values. Replace the example figures with your own and you get an honest assessment for your home. Funding and carbon-price details refer to Germany; if your property is elsewhere, please check local energy prices and incentives.
The formula: calculating heating cost savings from windows
The U-value states how much heat flows through a component per square metre and per degree of temperature difference, in W/(m²K). Over a heating season, the temperature differences between inside and outside are added up to heating degree hours (in kilokelvin hours, kKh). This gives:
Heat saved (kWh/a) = (Uw old − Uw new) × window area (m²) × heating degree hours (kKh/a)
In its worked examples, the Verbraucherzentrale uses 65 kKh/a and points out that this is a theoretical standard value; for more precise figures, regional climate data should be used. What the individual U-values mean is explained in Uw, Ug, Uf: the U-values of a window.
Worked example step by step
The following values are assumptions for a worked example, not measurements from a real house.
Step 1: determine the window area
Measure all windows and window doors by their structural opening size and add up the areas. In the example: 25 m² of window area in a detached house.
Step 2: set the old and new U-values
- Old: You rarely know the Uw-value of old windows exactly. An energy consultant can estimate it from the year of construction, frame and glazing. In the example, we assume Uw = 2.7 W/(m²K).
- New: For the German BAFA grant, windows must reach a Uw of no more than 0.95 W/(m²K). In the example, we use exactly this value.
The difference is 1.75 W/(m²K).
Step 3: calculate the heat saving
1.75 W/(m²K) × 25 m² × 65 kKh/a = 2,844 kWh of heat per year (rounded).
Step 4: take the heating into account
The heating no longer has to produce the heat that has been saved. How much fuel or electricity that is depends on the system:
| Heating system (example assumption) | Calculation | Final energy saved |
|---|---|---|
| Gas condensing boiler, utilisation factor 0.9 | 2,844 ÷ 0.9 | approx. 3,160 kWh of gas |
| Heat pump, seasonal performance factor 3.0 | 2,844 ÷ 3.0 | approx. 950 kWh of electricity |
Step 5: apply the cost
Take the unit price from your last bill. With an assumed gas price of €0.12/kWh, the example gives a saving of around €380 per year. If your price is higher, the saving rises accordingly. For oil and gas in 2026, the CO2 price also comes into play, with a price corridor of €55 to €65 per tonne; it is already included in the fuel price.
What the rule of thumb does not capture
The calculation is deliberately simple. At several points it underestimates or overestimates reality:
- Ventilation heat losses: Old windows are often leaky. New, airtight windows reduce draughts. This effect is missing from the U-value formula and can raise the actual saving. More in the article Blower door test and window connection.
- Solar gains: Triple glazing usually lets through less solar energy than double glazing (lower g-value). On south-facing sides, this can slightly reduce the saving. See g-value and light transmittance.
- Thermal bridges at the connection: Poorly executed installation reduces the effect.
- User behaviour: If you choose higher room temperatures after the replacement because it no longer feels draughty, you save less.
- Climate and location: The 65 kKh is an average. In harsh locations the value is higher, in mild ones lower.
How large the saving turns out in practice, and what role the condition of the rest of the building envelope plays, is described in Window replacement: how much heating energy do you really save?.
Variant: replacing only the worst windows?
Some owners consider replacing only individual windows. The formula helps with this decision: calculate each window separately. Large windows with a very poor Uw-value in heated rooms bring the highest saving per euro invested. Small windows in storerooms or in an unheated cellar contribute little. However, with a partial replacement, scaffolding and fitting costs are spread over fewer windows, and an inconsistent façade appearance often cannot be corrected when you replace the rest later. For funding, the minimum investment of the relevant programme also counts.
Sources of error in your own calculation
The most common mistakes in a self-made calculation are:
- Glass area instead of window area: The Uw-value refers to the whole window including the frame. Calculate with the external dimensions of the window, not just the visible glass area.
- Ug instead of Uw: The Ug-value applies only to the glass and is better than the Uw-value. If you calculate with Ug, you overestimate the saving.
- Including the standing charge: Only the unit price per kWh falls with consumption; the standing charge stays.
- Forgetting the efficiency: Without the heating efficiency or seasonal performance factor, the final energy saved will be wrong.
Payback: when do new windows pay for themselves?
If you divide the investment by the annual saving, you get a simple payback period. Three points shift the calculation considerably:
- Funding or tax bonus: A 15 % BAFA grant or a 20 % tax reduction under § 35c of the German Income Tax Act (EStG) reduces the investment (as of September 2026). Details in the article KfW or BAFA for windows?.
- Costs you would incur anyway: If the old windows are at the end of their life, costs arise anyway. In energy terms, only the extra cost compared with a simpler specification then counts.
- Energy price trend: Rising prices shorten the payback, falling prices lengthen it.
Do not judge windows by heating costs alone. More comfort, fewer draughts, better sound insulation, higher burglar resistance and a lower risk of condensation are tangible benefits that do not appear in any payback calculation.
Example with funding
Staying with the assumptions: if the new windows cost €20,000 in the example and you use § 35c EStG, the net cost is reduced over three years by 20 % to €16,000. With an assumed saving of €380 per year, that would give a payback of just over 40 years on paper, which is a long time purely in energy terms. But if you count only the extra cost compared with a replacement that was due anyway with poorer windows, the calculation looks quite different. That is exactly why you should always work through both perspectives.
Your own calculation: template
| Input | Your value |
|---|---|
| Total window area (m²) | … |
| Uw old (W/(m²K)), estimated by the energy consultant | … |
| Uw new according to the quote (W/(m²K)) | … |
| Heating degree hours (kKh/a), e.g. 65 | … |
| Utilisation factor or seasonal performance factor of the heating | … |
| Energy unit price (€/kWh) | … |
Checklist
- Record all window areas completely, including window doors and roof windows.
- Have the old Uw realistically estimated and take the new Uw from the quote.
- Calculate with your own energy price and heating system.
- Include funding or § 35c in the investment.
- Treat the result as an order of magnitude, not a guarantee.
You can see the Uw-values for your preferred windows in the window configurator. With it, you can run the calculation with real quote values.
Frequently asked questions
How do I calculate the saving from new windows?
In simplified form: the difference between the old and new U-values, times the window area, times the heating degree hours gives the heat saved in kWh per year. The Verbraucherzentrale uses 65 kKh per year as an approximation in its worked examples.
Which energy price belongs in the calculation?
Use the actual unit price from your last bill and take the efficiency of your heating into account. With a heat pump, divide the heat quantity by the seasonal performance factor before multiplying by the electricity price.
Why do I sometimes save more in practice than calculated?
The U-value calculation only captures heat conduction through the window. Old windows are often leaky as well; new, tightly fitted windows also reduce ventilation heat losses, which the rule of thumb leaves out.
Will the German CO2 price raise heating costs in 2026?
Yes, for oil and gas. For 2026, a price corridor of €55 to €65 per tonne of CO2 applies under the German Fuel Emissions Trading Act, and it is reflected in fuel prices.
Sources
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.