Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Shutters, security & installation

Removing and Disposing of Old Windows: Removal, Sorting Materials and Recycling

6 minutes read

The best way to dispose of old windows is by material type: uPVC windows can be handed in through the Rewindo recycling system, even with glass and hardware; aluminium windows go to metal recycling; timber windows and flat glass go to the recycling centre or a waste contractor. Window glass does not belong in the bottle bank. For commercial window replacement, the German Commercial Waste Ordinance in principle requires glass, plastic, metal and wood to be collected separately.

The recycling schemes and waste rules described here are German. If your property is elsewhere, please check your local council's recycling centre rules and the waste regulations that apply.

Removing old windows: how it works

Removal is part of every window replacement and determines how much making-good is needed at the reveal. The typical sequence:

  1. Lift out the sashes: The sashes are lifted out of the hardware. Large triple-glazed sashes are heavy, so fitters work in pairs.
  2. Secure the glass: With damaged panes, the glass is first secured with tape or removed separately.
  3. Release the frame: Cut through the fixings and cut open foam and sealants. The frame is often sawn through so that it can be removed from the wall without leverage.
  4. Clean the reveal: Remove old foam, mortar and sealant residues so that the new connection bonds to a sound, clean substrate.
  5. Check the window cill: The old external cill stays or is replaced, which affects the fitting height of the new window. See External and internal window cills.
  6. Assess the old roller shutter box: When switching to a top-mounted shutter, the old built-in box is removed and the opening closed with neat insulation.

The further installation steps are explained in the article RAL installation. If you want to do the removal yourself, you will find the limits and risks in the article Fitting windows yourself.

Which materials a window contains

Component Material Disposal route
Frame and sash PVC, timber, aluminium or timber-aluminium by material, see below
Glazing flat glass, sealed unit with spacer flat-glass collection, not the bottle bank
Hardware steel, zinc scrap metal
Seals EPDM, TPE, silicone with the frame or residual waste
Steel reinforcement steel (in uPVC windows) separated during PVC recycling

uPVC windows: recycling through Rewindo

Rewindo is the recycling initiative of the German plastic profile manufacturers. The system accepts removed old PVC windows, roller shutters and doors. Windows can be handed in as they are, with glass, hardware and seals, without pre-treatment. Doors must be delivered without glass and door leaf because these can contain other plastics.

There are three routes:

  • Delivering them yourself to Rewindo recycling partners,
  • Collection by a recycling partner after a quote,
  • regional collection points, especially for very small quantities of fewer than ten windows.

By its own account, the Rewindo system recovered over 58,000 tonnes of recyclate from old windows in 2025. How much CO2 recycled PVC saves compared with new material is shown in the article Carbon footprint of windows.

Aluminium windows: metal recycling

Aluminium has a high material value and is generally recycled through metal dealers or waste contractors. The A|U|F initiative organises a loop for windows, doors and façades from removal through sorting to the new profile. It states that secondary aluminium needs only about 5 per cent of the energy of primary aluminium. If you are removing larger quantities, collect aluminium by type and separate it from glass, plastic parts and seals; this makes recovery easier.

Timber windows: dispose of separately

Old timber windows are mostly painted or stained and often treated with wood preservatives. They therefore do not count as untreated wood but are collected as treated waste wood via the recycling centre or a specialist waste contractor. Classification and acceptance conditions are set by the individual contractor; the German Federal Environment Ministry is working on an amendment of the waste wood ordinance. Ask beforehand whether glass and hardware have to be removed.

With very old windows, paints, putty or joint compounds may contain pollutants. If in doubt, have this checked before removal and appoint a specialist firm.

Commercial Waste Ordinance: what firms must observe

For construction and demolition waste, § 8 of the Gewerbeabfallverordnung (German Commercial Waste Ordinance) requires, among other things, glass, plastic, metals and wood to be collected separately and sent for reuse or recycling. Exceptions apply if separation is technically impossible or not economically reasonable, for example for lack of space. The documentation obligations do not apply to jobs with a total of no more than 10 cubic metres of waste. For window companies, this means: plan containers for glass, PVC, metal and wood, or appoint a waste contractor who handles the separation.

Removal in an occupied house: dust, protection and timetable

A window replacement usually takes place in occupied rooms. So that removal does not do more damage than necessary, you should prepare:

  • Clear the working area: Move furniture at least two metres away from the window, take down curtains and curtain rails, remove radiator covers.
  • Cover floors and furniture: Dust is created when releasing frames and removing plaster residues. Fitters work with dust sheets and dust barriers; ask beforehand whether this is included in the quote.
  • Replace room by room: An experienced team generally removes and fits windows so that openings are not left open overnight. With large elements or bad weather, the opening is temporarily closed.
  • Allow for the internal reveal: After removal, plaster damage at the reveal often shows. Clarify who does the making-good of plaster and whether decorating will be needed.
  • Window boards and roller shutters: If internal window boards or old roller shutter boxes are removed too, the effort rises, and so does the amount of waste.

Replacing windows in winter is possible in principle; how that works is described in the article Replacing windows in winter.

Reuse instead of disposal?

Intact old windows can sometimes still be used, for example for garden sheds, greenhouses or unheated outbuildings. In energy terms, old windows are unproblematic where nothing is heated. For heated living spaces, however, they are not a good choice, because they generally do not meet the statutory requirements for new components. If you want to pass on old windows, you should only have them removed once the recipient is lined up, and store them dry.

Cost and quote

Removal and disposal are usually charged as a separate item per window or as a lump sum. The cost depends on size, material, accessibility and the disposal route. When comparing quotes, check whether the item is included; more on this in the article Comparing window quotes.

A practical tip for private households: ask the local recycling centre beforehand which quantities and materials are accepted and whether fees apply. The rules differ from council to council, and not every site accepts sealed units or treated wood.

Checklist

  1. Clarify in the quote whether removal and disposal are included.
  2. Determine the material of the old windows: PVC, timber, aluminium.
  3. Decide the disposal route: Rewindo, metal recycling, recycling centre.
  4. Never put glass in the bottle bank.
  5. With very old timber windows, watch for possible pollutants.
  6. On commercial sites, organise separate collection.
  7. Note the frame material, quantity and disposal evidence for your own records.

If you are planning a window replacement, put together your new windows in the configurator. For questions about installation and removal, you can reach our team via the contact page.

Frequently asked questions

Where can I dispose of old uPVC windows?

At recycling partners and regional collection points of the German Rewindo initiative. Windows can be handed in there as they are, with glass, hardware and seals. For small quantities of fewer than ten windows, Rewindo recommends regional collection points; many recycling centres also accept old windows.

Does window glass go in the bottle bank?

No. The bottle bank is for packaging glass such as bottles and jars. Flat glass and sealed units have a different composition and are collected through recycling centres, waste contractors or recycling systems for windows.

Will the window fitter take the old windows away?

Many specialist firms offer removal and disposal as a service. Make sure the item is expressly included in the quote and ask whether the old windows go into a recycling system.

Do I have to separate window waste?

In Germany, the Commercial Waste Ordinance (GewAbfV) requires construction and demolition waste to be collected separately, including glass, plastic, metals and wood, as far as technically possible and economically reasonable. For small private quantities, the rules of the local recycling centre apply.

Sources

  1. Rewindo: Recycler und Annahmestellen für Altfenster(opens in a new tab)
  2. Rewindo: Infomaterial und Recyclingzahlen 2025(opens in a new tab)
  3. § 8 GewAbfV – Getrennthaltung von Bau- und Abbruchabfällen(opens in a new tab)
  4. A|U|F – Aluminium und Umwelt im Fenster- und Fassadenbau(opens in a new tab)
  5. Bundesumweltministerium: Altholz(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Roller Shutter and Window Cill: Plan the Connection
Shutters, security & installation

Roller Shutter and Window Cill: Plan the Connection

Connect a roller shutter and window cill properly: plan guide rails, bottom rail, end profiles and sealing for external, top-mounted and built-in shutters.

6 minutes read

Cover image: Replacing Windows in Winter: Does It Really Work?
Shutters, security & installation

Replacing Windows in Winter: Does It Really Work?

Replacing windows in winter: what to note in the cold, which fitting foams and tapes work, how the day runs and when it is better to wait.

6 minutes read

Cover image: Roller Shutter Repair: Strap, Slats and Motor
Shutters, security & installation

Roller Shutter Repair: Strap, Slats and Motor

Repair a roller shutter: replace the strap, swap the strap winder, replace slats, set motor end positions, with fault diagnosis and safety advice.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy