The Carbon Footprint of Windows: Production, Use and Recycling at a Glance
7 minutes read
The carbon footprint of windows is made up of three phases: production (embodied energy for profiles, glass and hardware), use (heat losses over decades) and end of life (recycling or disposal). In heated homes, the use phase strongly shapes the balance, which is why good insulation values count. Recycling reduces the footprint of production markedly: according to a myclimate study, one tonne of window profile made from PVC recyclate saves around 2 t of CO2 compared with virgin material.
The recycling schemes and figures quoted here come from German initiatives (Rewindo, A|U|F). The principles apply everywhere, but if you are outside Germany, ask your installer which take-back and recycling routes exist locally.
The three phases of a window's carbon footprint
| Phase | What counts | Levers |
|---|---|---|
| Production | raw materials, energy for profiles and glass, transport | recyclate share, material efficiency, transport routes |
| Use | heat losses through frame, glass and connection, solar gains | Uw-value, g-value, airtight installation, service life |
| End of life | removal, recycling, disposal | separation by material type, take-back systems |
A full life-cycle assessment takes all three phases into account. For manufacturers, there are environmental product declarations (EPDs) based on standards for construction products. Ask specifically for such evidence when buying if the climate balance matters to you.
Production: embodied energy in profile, glass and hardware
Plastic profiles
PVC is made from constituents of crude oil or natural gas and from salt. The energy input for virgin material is considerable. The recycling initiative Rewindo, backed by the German plastic profile manufacturers, commissioned a study on this from myclimate Deutschland in 2023, reviewed by the Sustainum Institute. The results per tonne of window profile:
| Figure per tonne of profile | Virgin PVC | PVC recyclate |
|---|---|---|
| Energy demand | 18,453 kWh | 3,814 kWh |
| Carbon footprint | 2.69 t CO2e | 0.7 t CO2e |
That equals a saving of around 14,600 kWh of energy and around 2 t of CO2 per tonne. Rewindo also states that repeated recycling has no adverse effect on the PVC. More on service life in the article uPVC windows: lifespan and recycling.
Aluminium profiles
Primary aluminium is very energy-intensive. That makes recycling all the more important: the A|U|F initiative (Aluminium und Umwelt im Fenster- und Fassadenbau, aluminium and the environment in window and façade construction) states that secondary aluminium needs only about 5 per cent of the energy of primary aluminium to produce. By its own account, the A|U|F system recycled around 60,000 tonnes of aluminium in 2025, saving about 320,000 tonnes of CO2. Aluminium windows with a high recyclate share can therefore have a much better production balance than those made from primary metal.
Comparing materials with a sense of proportion
Blanket statements such as "timber is always more climate-friendly than plastic" or "aluminium is always bad" fall short. What matters is the recyclate share, the energy source in production, service life, maintenance effort and recycling route. A timber window that has to be repainted regularly and is replaced after a few decades can do worse than expected; an aluminium window made mostly from secondary material can do better. So compare specific products by their environmental product declarations rather than by material clichés. Material choice in general is covered in the article uPVC or aluminium.
Glass and hardware
Triple glazing means more glass per square metre than double glazing and therefore more embodied energy. Against this are lower heat losses in the use phase. How the two net out in the overall balance is shown by product-specific life-cycle assessments for the actual window. Hardware made of steel and zinc is a comparatively small item but is well recyclable.
Use: this is where thermal insulation decides
A window often stays in the building for decades. Over that time, heat losses add up. You know the formula from the article Saving heating costs with new windows: U-value difference × area × heating degree hours. Every kilowatt hour of heat saved avoids CO2 emissions, depending on the energy source.
Three factors make the difference:
- Uw-value: A low value reduces transmission losses. Basics in the article Uw, Ug, Uf.
- g-value: On south-facing sides, windows can gain solar energy during the heating season. Details in the article g-value and light transmittance.
- Installation quality: An airtight connection with few thermal bridges makes sure the values are also achieved once the window is fitted.
As the share of renewable heat rises, for example through heat pumps running on green electricity, CO2 emissions per kilowatt hour fall. Production then gains relative weight, and recycling becomes even more important.
End of life: recycling instead of landfill
uPVC windows
Rewindo runs a nationwide system of collection logistics and recycling technology. By its own account, over 58,000 tonnes of recyclate were recovered from old windows in 2025. Old PVC windows, roller shutters and doors can be handed in as they are, with glass, hardware and seals; doors, however, without glass and door leaf. For small quantities of fewer than ten windows, Rewindo recommends regional collection points.
Aluminium windows
Aluminium has a high material value and is therefore generally sent for metal recycling. A|U|F organises a closed loop from removal through sorting and melting down to the new profile.
Timber windows and glass
Old timber windows are often treated with paints and wood preservatives and are therefore disposed of separately. Sealed glazing units do not belong in the bottle glass bank. You will find practical advice on removal in the article Removing and disposing of old windows.
Repair, keep using or replace?
From a climate point of view, the "greenest" window is often the one already installed, as long as it insulates and seals sufficiently. Before replacing working, relatively young windows, it is worth looking at repairs: adjusting hardware, replacing seals, renewing a misted sealed unit. The articles Replacing window seals and Misted pane between the glass show what is possible.
The situation is different for old windows with single glazing or early double glazing. Their heat losses are so high that replacement usually makes sense both in energy and climate terms. It is then important not to let the old windows disappear into construction rubble but to send them for recycling; that closes the loop, and the old profiles can become new ones.
Buying windows with the climate in mind: what to look for
- Durability: A window that lasts 40 years spreads its embodied energy over more years. Robust hardware and replaceable seals extend the service life.
- Good thermal insulation: Uw-values that at least meet the funding requirements pay off in the use phase.
- Recyclate share: Ask the profile manufacturer about recyclate in the profile core or about secondary aluminium.
- Environmental product declarations: EPDs make balances comparable.
- Take-back: When replacing windows, make sure the old windows go into a recycling system.
- Transport routes and bundling: Delivering all elements together saves journeys.
One last point: look for claims backed by evidence. Terms such as "climate-neutral" or "sustainable" say little without system boundaries, a calculation basis and independent verification. Reputable manufacturers state the data basis of their claims.
Checklist
- Prioritise service life and thermal insulation as the most important levers.
- Ask about EPDs and recyclate share.
- Secure installation quality; only then do the performance figures take effect.
- Agree removal and recycling of the old windows in the contract.
- Repair working windows first before replacing them.
You will find windows with good insulation values and durable components in our windows overview. You can then put together your preferred window in the configurator.
Frequently asked questions
Which phase matters most for the carbon footprint of a window?
That depends on the building. In heated homes, a large part of the impact over the long service life comes from heat losses. Production and recycling determine the so-called embodied energy and gain weight the better insulated the building is.
How much CO2 does recycled PVC save in window profiles?
According to a 2023 myclimate study for Rewindo, one tonne of window profile made from recyclate causes about 0.7 t CO2e, compared with about 2.69 t CO2e from virgin PVC. That is a saving of roughly 2 t CO2 per tonne.
How well can aluminium from windows be recycled?
Very well. The A|U|F initiative states that secondary aluminium needs only about 5 per cent of the energy of primary aluminium to produce.
Where do I dispose of old uPVC windows in an environmentally sound way?
At recycling partners and regional collection points of the German Rewindo initiative. Windows can be handed in there with their glass, hardware and seals.
Sources
- Rewindo/myclimate: Energieeinsparung und CO2-Fußabdruck von recyceltem PVC (2023)(opens in a new tab)
- Rewindo: Infomaterial und Kunststofffensterrecycling in Zahlen 2025(opens in a new tab)
- A|U|F – Aluminium und Umwelt im Fenster- und Fassadenbau(opens in a new tab)
- Rewindo: Recycler und Annahmestellen(opens in a new tab)
- Verbraucherzentrale: Rechenbeispiele (Rechenweg mit kKh)(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.