Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Window profiles

uPVC or Aluminium: Which Window Material Is Worth It for Your Home?

7 minutes read

uPVC or aluminium – for most homes the uPVC window is the more economical choice: good insulation values even at moderate frame depth, a lower price, easy care. Aluminium is worthwhile when large formats, particularly slim sightlines, dark colours without restrictions or a very robust surface are wanted. Both materials meet the requirements of the German GEG and funding – they just get there in different ways.

The materials in principle

uPVC (PVC)

uPVC profiles are hollow-chamber profiles made of PVC. PVC conducts heat poorly, so the chambers alone already insulate well. Because PVC on its own is not stiff enough, the profiles are usually reinforced with steel or fibre composites. Coloured surfaces are mostly created with decorative foils or an aluminium cover shell.

Aluminium

Aluminium is stiff and dimensionally stable but conducts heat very well. Modern aluminium windows therefore consist of an outer and an inner shell thermally separated by insulation bars. The surface is powder-coated or anodised. No reinforcement is needed.

The direct comparison

Criterion uPVC Aluminium
Thermal insulation good from 70–76 mm frame depth depends on insulation zone; highly insulated systems very good
Stability reinforcement needed self-supporting, very stiff
Face widths rather wider slimmer possible
Large formats limited by reinforcement and weight very large sashes possible
Colours foils, aluminium shells; dark tones with restrictions powder coating in almost all RAL colours
Surface easy care, foil may age very weather-resistant
Weight lighter (especially without steel) heavier
Price usually cheaper usually more expensive

Insulation values: figures from manufacturer data

How close the two materials have come is shown by the published frame values (as of September 2026):

System Material Frame depth Uf according to manufacturer
Kömmerling 76 MD uPVC 76 mm up to 1.0 W/(m²K)
Kömmerling 88 MD uPVC 88 mm 0.93–0.98 W/(m²K)
REHAU Artevo (LowE) uPVC 80 mm down to 0.81 W/(m²K)
Schüco AWS 75.SI+ Aluminium 75 mm from 0.92 W/(m²K)
Schüco AWS 90.SI+ optimized Aluminium 90 mm 0.80 W/(m²K)

Both materials can therefore reach funding values. With aluminium, the specific profile combination and the insulation bar material matter more; for AWS 75.SI+ at 117 mm face width, Schüco quotes Uf 1.2 or 1.3 W/(m²K) depending on the bar. uPVC reaches low values with less effort.

The statutory requirement when replacing windows in a German residential building is Uw ≤ 1.3 W/(m²K), and BEG funding requires Uw ≤ 0.95 W/(m²K) (as of September 2026). In the UK, check the Building Regulations thermal limits instead. More in the article Uw, Ug, Uf: the U-values of a window.

Stability and large glazed areas

This is the classic advantage of aluminium. Because the profile itself is load-bearing, large and heavy sashes can be built with slim frames. Schüco quotes hardware up to 250 kg sash weight for AWS 75.SI+ and AWS 90.SI+. uPVC systems are catching up: with the RAU-FIPRO X material, REHAU quotes sash heights up to 2.80 m for Artevo. For very large formats, lift-and-slide doors or floor-to-ceiling fixed glazing, though, aluminium often remains the safer choice. More in the article Lift-and-slide door in uPVC or aluminium.

Colour and surface

uPVC

Coloured uPVC windows are mostly coated with decorative foils such as RENOLIT EXOFOL. For EXOFOL MX, RENOLIT quotes a warranty of up to 10 years in northern and central European climates and uses pigments with Solar Shield technology intended to reduce heating of the profiles. Dark colours heat up more than white, so stricter rules for reinforcement and sash sizes often apply.

Aluminium

Powder coating and anodising are very resistant, possible in almost all RAL colours and unproblematic even in dark shades. Different colours can be chosen outside and inside. Colour choice in detail: Anthracite outside, white inside.

Care and lifespan

Both materials are easy to care for: clean profiles with mild cleaners, care for seals occasionally, lubricate hardware annually. Aluminium is less sensitive to scratches and UV. With uPVC, surface ageing depends on the foil or the white profile. For both materials, lifespan depends strongly on installation quality and maintenance; no reliable, universally valid figures can be given.

Cost

At a comparable Uw-value, aluminium windows are generally more expensive than uPVC windows. The reasons are the more elaborate profile production with thermal break, the coating and the fabrication in metalwork. How big the difference is depends on size, colour, glazing and hardware. The price factors are explained in the article What do new windows cost?.

The middle way: uPVC with an aluminium shell

Many uPVC systems offer aluminium cover shells, such as the AluClip range from Kömmerling. Outside you see aluminium; inside, the uPVC profile remains. That is a good solution if the façade calls for an aluminium look but the budget is limited. The shell does not, however, replace the stiffness of a true aluminium profile.

Sustainability and recycling

Both materials are recyclable if returned as single-material streams. With uPVC profiles, manufacturers increasingly use recycled content; REHAU quotes up to 75% recycled material in the profiles for Artevo. Aluminium can be remelted without loss of quality, but primary production is energy-intensive. For a reliable life-cycle assessment, the environmental product declarations (EPDs) of the specific systems are the right source – blanket statements such as "aluminium is greener" or "uPVC is greener" rarely stand up to close scrutiny.

Security and sound insulation

For burglar resistance, both materials are equivalent as long as the system is tested in the desired resistance class. Kömmerling quotes RC 2 with suitable equipment for 76 and 88, and Schüco quotes up to RC 3 for AWS 75.SI+ and AWS 90.SI+. For sound insulation the glass mainly decides; manufacturers of both material groups quote maximum values of around 47 to 48 dB.

Behaviour in heat and cold

uPVC expands more than aluminium with temperature changes. With white profiles that is unproblematic, but with dark decors on sunny façades it is a planning issue: the change in length must be absorbed through joints and fixings, and the profiles need adequate reinforcement. Aluminium is more dimensionally stable, but the outer shell gets very hot in summer and very cold in winter – which is why the thermal break is so important.

Decision guide

Your project Recommendation
Single-family home renovation, budget in focus uPVC
Renovation with funding uPVC (76–88 mm MD) or aluminium SI
Modern architecture with large glazed areas Aluminium
Dark façade colour, large sashes Aluminium or uPVC with aluminium shell
Near the coast, high weathering load Aluminium with a suitable coating
Ancillary rooms, cellar uPVC

Your next step

  1. Set the requirements: Uw target, formats, colour.
  2. Weigh budget against funding.
  3. For large formats and slim sightlines, take aluminium seriously.
  4. For standard formats, compare uPVC with a centre seal.
  5. Obtain quotes with a stated Uw per window and specify colour, hardware and glazing identically so that the prices are comparable.

You can compare uPVC and aluminium windows directly in the AluKun configurator. You will find all systems on the windows page.

Frequently asked questions

Do uPVC windows insulate better than aluminium windows?

Not necessarily. PVC conducts heat less, so uPVC profiles reach good Uf-values with less frame depth. Highly insulated aluminium systems such as Schüco AWS 90.SI+ also reach Passivhaus level, though.

Why are aluminium windows more expensive?

Aluminium profiles need an elaborate thermal break with insulation bars, and powder coating or anodising is more involved than white PVC. Specific price differences depend strongly on size, colour and specification.

Which material lasts longer?

Both materials are long-lived if professionally installed and maintained. Aluminium is more dimensionally stable and its surface very weather-resistant; with uPVC, dimensional stability and surface ageing depend more on colour, reinforcement and foil.

Is a uPVC window with an aluminium shell a good alternative?

Yes, if you want an aluminium look outside and the cheaper, well-insulating uPVC construction inside. Systems such as Kömmerling AluClip combine both; the aluminium shell is a cladding, not a load-bearing profile.

Sources

  1. Kömmerling 76 Mitteldichtung Standard – Produktseite(opens in a new tab)
  2. Kömmerling 88 Standard – Produktseite(opens in a new tab)
  3. Schüco Window AWS 75.SI+ – BIMobject (Herstellerdaten)(opens in a new tab)
  4. Schüco – AWS 90.SI+ optimized (Produktseite)(opens in a new tab)
  5. REHAU – Premium-Fenstersystem ARTEVO(opens in a new tab)
  6. RENOLIT EXOFOL MX – Außenfolie für Fensterprofile(opens in a new tab)
  7. GEG Anlage 7 – Höchstwerte der Wärmedurchgangskoeffizienten(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Elvial W59: Aluminium Windows from Greece
Window profiles

Elvial W59: Aluminium Windows from Greece

Elvial W59 SI² overview: 59 mm frame depth, Uf from 1.8 W/(m²K), sashes up to 130 kg. What the system offers and why it is rarely first choice in Germany.

6 minutes read

Cover image: Timber-Aluminium Windows: When Do They Pay Off?
Window profiles

Timber-Aluminium Windows: When Do They Pay Off?

Timber-aluminium windows: wood inside, aluminium shell outside. Construction, ventilation gap, care, insulation and cost – and when they really pay off.

6 minutes read

Cover image: REHAU Artevo: uPVC Window System and Uses
Window profiles

REHAU Artevo: uPVC Window System and Uses

REHAU Artevo overview: 80 mm frame depth, centre seal, RAU-FIPRO X instead of steel, Uf down to 0.81 W/(m²K) with LowE, up to 75% recycled content.

7 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy